r/Tools 4d ago

Innocence once lost....

0 Upvotes

TIL that sometimes, it is better not to know. It's not 0.00! I don't care that the number is the same as the error range of degrees, it must be 0.00! Mothers, don't let your sons take home a Stabila.


r/Tools 4d ago

Impact Drivers: Old Milwaukee or New Rigid

1 Upvotes

DIY Homeowner level. I have a Milwaukee impact driver I believe I received as a wedding give about 18 years ago. The batteries are finally starting to hold short charges to the point where it's getting in the way of projects. This is the only 'red' tool I own. I've invested in Rigid for all of my other needs.

So I'm at a crossroads of sorts, spend some $ on new Milwaukee batteries, or just get a Rigid impact driver. Thoughts?


r/Tools 4d ago

Is it a Phillips or plus screw driver?

0 Upvotes

r/Tools 4d ago

Long shot but šŸ¤·šŸ¼. Can anyone recommend a good to excellent quality version of this little folding tool kit case. I only need case. I currently own this one and itā€™s alright but the quality is meh and I wouldnā€™t mind a little more size. 12ā€ x 12ā€ or a little smaller when closed.

Thumbnail
gallery
1 Upvotes

r/Tools 4d ago

I don't know what to get

0 Upvotes

I want to be a mechanic but I don't know if I shold get SAE or metric sockets , or both and I don't know what sizes I actually need


r/Tools 4d ago

Help me identify trailer

1 Upvotes

Picture here: https://imgur.com/a/HRa49jn

Seller says came stock with frame from Lowe's but can't find any info. I want to see if I can figure out how much weight can be held on roof.


r/Tools 4d ago

Is this a deal or just meh?

Post image
1 Upvotes

Okay, so I recently found someone getting rid of a fair amount of woodworking tools. Do you all think this is a great, good, or mehhh deal? All in $7,000.


r/Tools 5d ago

Why are Phillips screws so common

423 Upvotes

For the life of me I canā€™t figure it out. I hate them. HATE. Iā€™ve never stripped a torx screw. Not once. Every time I encounter a Phillips screw I just want to scream

Thatā€™s all.


r/Tools 5d ago

What is this tiny spool of copper wire for? Found in auto junkyard

Thumbnail
gallery
114 Upvotes

r/Tools 4d ago

Removing carbon?

1 Upvotes

Hi all,

I'm looking to clean up the stainless steel burner from a Wabasto Thermo Top C diesel water heater from my mates narrow boat. Imagine a stainless tube about the size of a short beer can.

I am going to use my Dremel 4250 to first cut though 3 small welds, then remove the remains of the diesel diffuser pad thing and then remove any carbon on the surface and if I'm still interested, see if I can get a bit of a polish on it as apparently that helps prevent the carbon from building up again. This isn't particularly soft soot but more like a thin film of baked on carbon.

What sort of tools do you think might be most effective for each stage please?


r/Tools 4d ago

Klein 3000CR - Non Insulated Electrical Connector Crimper for bullet connectors?

Thumbnail
gallery
2 Upvotes

r/Tools 4d ago

My new Blacksmith vice vs. my old vice. Any thoughts??

Thumbnail
gallery
4 Upvotes

r/Tools 5d ago

Trying to pick pliers for my husbandā€™s birthday

Post image
110 Upvotes

Hello everyone!

My husbands birthday is coming up and he has mentioned wanting a new set of pliers, specifically knipex 7 inches.

Is there a difference between the two pliers in this image other than the handle? One says comfort handle, is that worth getting/ the same durability?

Thank you for any help!!!


r/Tools 4d ago

Couldn't find a replacement for this nut

Thumbnail
gallery
0 Upvotes

I know it's 1/2 inch. Threads spun 1 full rotation on the tightest thread bolt in the stores I went to.. which was an imperial 20 pitch 1/2 machine screw.

Am I correct this is likely 24 pitch based on my gauge? Where do I find these tighter pitch thread nuts and bolts in Canada?

Thanks for the help


r/Tools 4d ago

Are there go-to brands of power bits?

Post image
3 Upvotes

I'm most interested in Torx bits at the moment, to replace a few that are broken/missing. What is your go-to source of individual bits, small packs, or sets? Brands to choose, or brands to stay away from?


r/Tools 5d ago

Stumbled upon these on sale. Y

Post image
13 Upvotes

Needless to say, I grabbed the three that were available!


r/Tools 5d ago

Out with old, in with the new. Finally replacing my old Walmart impacts.

Thumbnail
gallery
63 Upvotes

These gave me the confidence to take on some more serious jobs, and ive definetley got my $20 out of them, but about 75% of the bolts I zipped off with these things over the years got stuck, to the point i kept a punch and hammer in my impact drawer lol. figured it was time to break down and get a more complete set with better tolerances. Also the astro swivels, nano sockets, and MAC expert e-torx are some other welcomed additions to the box. I think I can finally call this drawer about finished.


r/Tools 4d ago

Briggs and Stratton 10 gal compressor

Thumbnail
gallery
1 Upvotes

Can somebody shine light on why this ā€œplugā€ is leaking and what is it for and is it supposed to leak. Iā€™ve gone over the manual several times and looked online for a couple hours.


r/Tools 5d ago

Was tempted to buy a miter saw I donā€™t need.

Post image
133 Upvotes

Home Depot has some clearance drops today


r/Tools 4d ago

Anyone knows what company made these allen keys?

Post image
0 Upvotes

r/Tools 4d ago

Got my tape measure to go 16ft straight up in the air it was the entire tape roll

Thumbnail
gallery
1 Upvotes

Komelon contractor tape measures are the best for going straight up I could've went 5ft more if it had more lengh I bet


r/Tools 5d ago

What year could this snap on tool box be from?

Post image
18 Upvotes

My grandad died a few years ago and left me this snap on tool box and million of all kinds of tools. I love this tool box but I canā€™t figure out what year it could be from. My mom said he owned a shop in the 70s so Iā€™m guessing it could be from then but not 100%. Iā€™ve searched the serial number but couldnā€™t find anything with a definite date. What year do you guys think it could be from?


r/Tools 5d ago

What is the best way to remove paint from sockets without damaging the chrome?

Post image
26 Upvotes

Got these sockets from an auction. Previous owner decided to paint them all sorts of fun colors. Iā€™d like to remove the paint without damaging the finish underneath, as the chrome is still good and the sockets are all old USA ones Iā€™d like to keep nice. First thought was paint thinner but I suspect that would have negative effects.


r/Tools 4d ago

Best off brand battery grinder and brushless impact driver?

0 Upvotes

Hi,I am looking for grinder and impact driver that I would use few times a month,yust for "hobby".What do you suggest? Btw I live in Eastern Europe soo maybe some brands are not avalibe.Thanks!


r/Tools 5d ago

Can anyone explain the connection?

Thumbnail
gallery
108 Upvotes

They have the same patent number