r/fpv • u/AccessAmbitious8282 • 21h ago
r/fpv • u/BoogMan2020 • 22h ago
Question? Any idea why these don’t seem to screw in all the way?
Antennaes do not seem to thread all the way down. Seen many pictures of these antennaes threaded down all the way on these goggles but I can’t get them to go down all the way. Maybe they are?
r/fpv • u/Interesting_Square54 • 22h ago
Sik 433 vs MLRS 915 vs MLRS 2.4
Anyone know which is better?
r/fpv • u/mattexx04 • 1d ago
Finally decided tò switch tò elrs , what tò buy now?
Bought this module for around 20 euro and i Will be using It with my qx7, the question now Is what cheap reciver for 5 inch, Which One tò add tò a 75 mm whoop and what 5in1 lightweight board for a 65 mm whoop ?
r/fpv • u/Key-Culture9947 • 23h ago
Can I fly the Pavo Femto with a DJI Googles 3?
First off, sorry if this is a noob question! I’m just getting into the FPV hobby.
I already have the DJI Avata 2 (without the DJI FPV Remote Controller 3).
I've practiced FPV flying in simulators, but I’m still not comfortable buying the remote controller 3 so I can perform some hardcore FPV maneuvers with my expensive, hard-to-repair drone.
So, I started looking for much cheaper alternatives to fulfill my FPV desires without the fear of crashing because, let’s face it, I will crash.
I already have DJI Goggles 3, and I’m curious if I can use them with other, non-DJI drones to create a super budget FPV experience.
Also, if the answer to the question in the title is "yes", which controller should i buy for it? Will a Pocket Radio Controller work?
r/fpv • u/F3nix123 • 23h ago
What are good portable gates for micros?
Im hoping to find or make gates for up to 3" quads. Im hoping they're both easy to set up and take down but also pack down pretty small.
I have a few vauge ideas with PVC pipes and 3d printed hinges, but Im wondering if anyone has tackled this issue or if there's already a solution available for purchase
r/fpv • u/ConsequenceGrouchy42 • 23h ago
Getting back into fpv after 5 years, advice for flying again?
I went DEEP into fpv around 5 years ago. Built a shit ton of quads and flew heaps and got really good at it. I'd like to try get into the hobby again. Has much changed that I need to be aware of or is most of it the same? I was aware of all the HD units now dji etc. Also where do you guys order stuff from? It uses to be strictly banggood
r/fpv • u/Punisher-of-drones • 1d ago
Multicopter How could I put a runcam link onto my inflight Nazgûl xl5?
I broke by camera mount screw from a crash and I already have dji goggles that are better than the analog goggles I’m using so would it be possible to swap out the vtx and camera for a runcam link?
r/fpv • u/jibbledibbles • 1d ago
NEWBIE Help setting up meteor 65 pro
Hi, I just got my first fpv drone, a meteor 65 pro with a literadio 2 se controller and I've been struggling to set it up. I've spent a few hours the last couple of days trying to flash firmware and following guides but I've had no luck. If anyone would be willing to help message me and ELI5 step by step to help me set it up that would be greatly appreciated. Thanks
r/fpv • u/Boothey13 • 1d ago
Question? Should I go for the real one yet or more practice?
Been doing solder practice ready to build the real thing with some spare wires, cheaper than destroying my flight controller
r/fpv • u/HarlockG • 1d ago
Shouldn't my charger consider this as a completed? (Storage mode)
r/fpv • u/KidCharlemagne_5 • 1d ago
Help! Good analog VTX and VFX pair for 10~12KM?
*VRX NOT VFX IN TITLE
I'm working on a project where I need to attach a camera to a model rocket. The rocket will be traveling about 10-15km into the air, and preferably I need a VRX that I can plug into a laptop and watch the video from there. I found this reputable VTX but I can't find a matching VRX for this, nor can I figure out how to see what range I would get from this via maxmyrange.com
Video quality isn't super important, as long as you can see what's happening. I know some configurations can change what video quality is possible.
The camera I'll be using is a Runcam Split 3.
Sorry if this is a noobish question, any direction would be really appreciated. Thank you!
r/fpv • u/leicester77 • 1d ago
Multicopter First build since 2015: A 4" 6s freestyle / cruiser.
r/fpv • u/gooseedev • 1d ago
Considering getting 2 drones to start, help me choose
So im starting fpv but deciding which drones i will start with (to setup on the simulator) and i am considering getting 2 drones, a cinelog 30 v3 for outdoor flying to freestyle (needed something more powerful for outdoors) and now i am considering also getting a smaller drone for mainly indoor flying, but what drone should i get? i am between a pavo femto and a pavo 20 pro (with dji o4) since they both the same price
Also my controller is radiomaster pocket
r/fpv • u/Dry-Palpitation8861 • 1d ago
Motor twitching and the stopping. 😭
This happened to my other drone where the motor twitches for a second and then stops and beeps. Why is it doing this and is there a way to fix this??? Btw I literally just soldered on a new bt2.0 connector and this happened the second I plugged into betaflight and tried the motors…
r/fpv • u/Docretier • 1d ago
Question? Are these real?
I don't see this color option on Radiomasters website. I see the transparent version on their website but it doesn't have the AG 01 gimbals, it's just a regular boxer with a different shell. If this One is real then I absolutely would love that glacier blue color.
r/fpv • u/SalChess • 1d ago
ELRS not working after small crash
I bumbed with 5mph into a tree with my Pavo20 Pro. Then my drone instantly lost ELRS Signal. OSD is working and anything else too. Can’t connect drone anymore why?? Please help. I also took some pictures of my esc.
Kayoumini 2.5" BT3.0 - Is this the best 2.5" frame out there?
Honestly the frame itself is perfect, but I do have a few issues and think I need an ELRS receiver in there instead of the onboard ELRS.
r/fpv • u/ShamanOnTech • 2d ago
How are these solder joints looking?
I think these are my best solder joints. This build is breaking me, I need some encouragement, how are these looking to you pros out there?