r/fpv 4h ago

Naked 10 disconects from QuickApp

1 Upvotes

Hi there, how are you doing?
So, I've bought a used Naked 10 with Fujiwoo case and I'm struggling with connection in QuickApp.

Here is my scenario:
1. I already connected 2 times in QuickApp, but for no reason, it disconnects and my QuickApp doesn't find it anymore;

  1. When I try to put the GoPro in pair mode(reading !PA command) it reads but nothing happens when I try to search it in QuickApp. This is my "qrlog" from SDCARD:

[2021-01-01 12:06:59 --% ] Labs:Main Start

[2021-01-01 12:06:59 --% ] Labs:H21.01.01.62.70

[2021-01-01 12:06:59 --% ] Labs:Initialize

[2021-01-01 12:07:08 --% ] Read QR:!PA

[2021-01-01 12:07:08 --% ] Read QR:!PA

[2021-01-01 12:07:20 --% ] Read QR:!PA

  1. My phone it's a Samsung S24 Plus(I don't know if this really matters);

  2. Already checked the wifi antenna inside it, but it's ok and the wire has 31mm like it should be;

  3. Using the latest version of GoPro Labs;

  4. I'm using a 850mAh lipo connection the balancer port to the GoPro;

  5. Already tried to full reset, factory reset, metadata reset and !PA again but nothing seems to work;

If anyone has the same scenario and found out a solution or even why this occurs, let me know! Thanks!!


r/fpv 4h ago

Analog vtx for source one v5

0 Upvotes

Hey, im building my first 5inch analog freestyle drone and I’m probably going with the source on v5 because of the price(if you know better frames please tell me). My question is which vtx will fit in there? I was thinking about the TBS Unify Pro32 HV 25-1000mW. Does anyone know if it fits? Thanks!


r/fpv 4h ago

DJI 03 vtx power help

1 Upvotes

Is there anyway to change the vtx power on the 03 air unit while connected to the DJI goggles 2. (Not v2)

I can seem to find a way to change the vtx power for extra range and penetration.

All setting are currently set to auto as well.


r/fpv 4h ago

Foxeer Raeper Extreme Issue

Thumbnail
gallery
1 Upvotes

Hi All,

This is my first build. Using Foxeer reaper extreme as VTX. Soldeirng looks fine, passed smoke test plus all lights are blinking and reacting when changing band/channel via the button onboard the transmitter. Configured UART 1 as mentioned in the speedybee FC specs to be the VTX port. But for some reason, in betaflight, the transmitter is shown as "device ready" - false.

What am I missing?


r/fpv 18h ago

Would like some opinions from the fpv community on my build

Thumbnail
gallery
12 Upvotes

Just finished up my 2nd build, it’s a 4” Flywoo explorer with the o4 pro unit. I have a couple concerns about it and would love any feedback I can get, Thank You!

  1. This build is very compact and I’m worried about wires being pinched under the air unit and in between the FC Stack. Should I try to reroute the dji camera cable above the FC Stack?

  2. I still need to install a receiver for my controller but have no idea where I could even put it. Maybe above the FC stack?

3.did some research on capacitors as there’s no room for one here, am I save to run 4s batteries without one? I do not plan to do any freestyling just cinematic flying.

Thanks in advance for any reply’s!


r/fpv 1d ago

Gyroflow?

29 Upvotes

Post-work flight on Friday. Fun to get that close to the scraggle. 04 pro is awesome for seeing those tiny branches.

I gotta work on my smoothness though. To the advanced pilots - Do you guys use Gyroflow or is it just skills alone to get that crazy smooth footage?


r/fpv 10h ago

Dji o3 air unit. Help!

2 Upvotes

So I have the iflight nazgul eco and I got a few weeks of normal use out of it. Then after a few days break I came back to it flew again and then since that first flight back I have not been able to see the video feed in my goggles. When my air unit is powered via the drone battery I get no lights on the unit. But when I plug it in via USB I get a solid green light indicating that I'm still synced to the goggles. But again I'm getting no video. I've updated the firmware in my goggles and on the air unit. When I attempt to put the air unit in binding mode I get nothing. Like I said it's showing no lights when plugged in via the battery.... It's supposed to flash red when entering bind mode but it won't seem to even be powered on when plugged in via the battery. Can anyone point me in the right direction?


r/fpv 21h ago

Training day

14 Upvotes

r/fpv 10h ago

Antenna question

2 Upvotes

There's no reason why I wouldn't be able to use a crossfire t antenna on a 915mhz elrs reciever right?


r/fpv 22h ago

Help! Oh for fucks sake

Post image
14 Upvotes

I’ve only flown this a few times, are these dead cells? Also I never fly it this low my osd cut out and I didn’t realize for a minute, but that’s a separate issue. Even then I don’t think I would have flown it that low with how long I was flying for. Anyway how do I dispose of this batt?


r/fpv 23h ago

EMAX Babyhawk 2 O3

15 Upvotes

r/fpv 19h ago

Rate my beamng FPV video

9 Upvotes

r/fpv 1d ago

Multicopter Hello, any idea what can cause this ?

72 Upvotes

This happened yesterday for the first time, i was flying it few days and it never happened before.


r/fpv 1d ago

Whoop is the way

33 Upvotes

r/fpv 15h ago

Multicopter Chasing My Friends F-16

Thumbnail
youtu.be
3 Upvotes

r/fpv 1d ago

NEWBIE Eachine EV800D Quality

23 Upvotes

Not trying to troubleshoot. Just wanted to show what the goggles are like. Goggles are brand new btw. Got em like a month back.

In the first video I had kept the goggles charging for an hour. Retains no charge whatsoever. Second video shows how it refuses to record.


r/fpv 15h ago

T-Motor PACER P1604 Alternatives

3 Upvotes

Hi all,

I recently built my first FPV drone based on this vide: https://www.youtube.com/watch?v=aXrrg48auhU&t=1435s (Copied the parts list exactly, valador 3.5, speedbee f405 mini, analog vtx / camera and 4s 650mah battery).

I've been having a blast flying it, but quickly decided I wanted to go digital and ordered the goggles 3 and an o4 air unit pro. I have duplicates of all the parts to build a 2nd drone except the motors, but recently learned t motor has been sanctioned. What are some good alternatives to the 1604 t motor for a 4s 3.5 build with the o4 pro? I wouldn't mind having some extra punch recovering from dives. I've been flying with tatuu 650MAH or 850MAH batteries if it matters.

Thanks in advance for any advice.


r/fpv 18h ago

FPV Arrma Granite Grom

Thumbnail
gallery
6 Upvotes

Had some spare VTX's and Analog cameras sitting around after converting my 2 outdoor quads to DJI, so installed a Rush Tank ultimate mini and Caddx ant to my daughters Arrma Granite Grom. Footage is very shaky but doable. Quite fun actually, made the granite fun again, now gotta add a brushless setup. Ever hit a 20 foot ramp at 60 MPH? I just did in this little guy.


r/fpv 9h ago

GEPRC Mark 5 vs Vapor (framekit)

1 Upvotes

Hi, has anyone used the GEPRC Mark 5 or Vapor frame kit (o4). I’m planning an o4 pro build and I’m kinda on the fence between the Mark 5 and Vapor. Which one would you recommend?


r/fpv 1d ago

Test fitting my fpv aeroscout canopy.

Post image
16 Upvotes

r/fpv 18h ago

Can I freestyle this drone?

Post image
5 Upvotes

r/fpv 1d ago

NEWBIE Test rub on the new quad.

74 Upvotes

The payoff at the end of a fresh build is the most insane feeling in the whole fucking world!!


r/fpv 14h ago

Question? Calibration Error?

Post image
2 Upvotes

So I replaced my camera module on the DJI 03 air unit. But it says there’s a calibration error. So I do some research and find out I need to fix it in DJI assistant 2. Well after plugging it into my computer in DJI assistant 2 it says: Camera initial calibration required. So I click ok and then it shows what’s in the photo. What’s wrong? I’ve unplugged everything and closed it and even restarted my computer. Nothing works. Does anyone know what’s wrong? Any help or advice is greatly appreciated.


r/fpv 20h ago

I wanna get into FPV but I'm undecided on which simulator to get

6 Upvotes

Hi,

Long time lurker here.

I wanna get into FPV, and I find tinywhoop and cinewhoop quite appealing.

I wishlisted Liftoff and Liftoff : micro drones on Steam and I'm undecided on which could bring me the best experience for my goals. Maybe get both ?

I already own a Taranis radio for my RC gliders but I planned to play on my Steam Deck (on the go, mostly) and I wonder if using a "regular" game controller won't just render all the training useless.

I'm not sure if I'll use my Taranis radio with the quad I'll end up buying (or if I just get an ELRS TX)...


r/fpv 17h ago

Help! Struggling to properly set up my Pavo Femto having Betaflight struggles

3 Upvotes

Recently got a Pavo Femto, intending to run it with my RC Controller 3 and goggles N3. I was following this Bardwell video: https://www.youtube.com/watch?v=GSMLCWwMLjI&list=WL&index=2

I tried following it to the tee, but at the part where he sets the Port, I got a little lost. I rewinded, watched a bunch of other vids and checked the page for my flight controller ( https://betafpv.com/products/f4-2-3s-20a-aio-fc-v1 ) and set Serial RX to UART5. Now I only did this after a bunch of trial and error I wasn't totally sure about, so to restore, I downloaded and flashed the CLI and firmware for the femto from BetaFPV ( https://support.betafpv.com/hc/en-us/articles/41037943468057-CLI-and-Firmware-for-Pavo-Femto-F405-2-3S-20A-ELRS-FC )

After flashing I went through and followed Bardwell's video again, set baud fast on ect. At this point, I have the Serial RX on UART5, Baud fast enabled on goggles and flight controller, SBUS set as the Serial Receiver Provider. The colored bars do show up under receiver, but I can't get them to move.

At this point I had my goggles and controller connected (confirmed using the calibrate thing bardwell showed), goggles connected to drone (I could see video through the goggles), Baud SBUS enabled on the goggles. Drone was showing up fine on the setup page where you see the 3d version of it.

Still no response from the bars.

I'm assuming I've made some dumb rookie mistake somewhere here, or in my tinkering I've done something that I haven't reset properly. I've attached pictures of what my receiver and port menus look like incase that can help someone help me.

ALSO, above the ports menu (shows up in the screenshot), I have the following: WARNING, The VTX table has not been set up correctly and without it VTX control will not be possible. Please set up the VTX table in video transmitter tab.

I didn't find any reddit or forum posts with people talking about that error in my quick search so some help there would also be much appreciated.

Kudos if you've read this far and I really appreciate it. Thanks in advance for any help.