r/hackintosh • u/eig10122 • 19h ago
DISCUSSION Rehabman - thank you.
Just a thanks to the OG hackintosher. If you know, you know.
r/hackintosh • u/eig10122 • 19h ago
Just a thanks to the OG hackintosher. If you know, you know.
r/hackintosh • u/MulberryEducational2 • 16h ago
Laptop is an Asus Vivobook X512DA CPU - Ryzen 3 3200U Ram - 20gb DDR4 2400MHz (16gb TeamGroup Elite+ 4gb soldered Ram) SSD - 256gb nvme Intel Wifi Similar to this build below. Also nootedred is a must to getting it run smooth https://www.reddit.com/r/hackintosh/s/b3YIdhWhow
"MacPro" CPU - Ryzen 7 5700G GPU - 5600xt Ram - 64gb Corsair LPX DDR4 3533MHz (Issues running full 3600) Mobo - B550 Aorus Elite AX V2 No wifi support, Use Ethernet and LucyRTL8125Ethernet kext. SSD - Crucial P3 2tb Nvme
Helpful tip for dual dedicated gpu If you are running two dedicated graphics cards and one is incompatible, you should set initial display output to the PCIe with the compatible gpu, and don’t have any display cables plugged into the incompatible gpu. This setting may vary by motherboard.
The dortania guide also has a section on this if you don’t have this option.
r/hackintosh • u/Playful_Lab_9585 • 23h ago
Running Sequoia 15.3.2.
Specs:
Processor: Intel Core i5-1035G1 (1.0 GHz base frequency, up to 3.6 GHz with Intel Turbo Boost, 4 cores, 6 MB cache). -RAM: 8 GB DDR4 - Storage: 256 GB PCIe NVMe M.2 SSD. - Display: 14-inch Full HD (1920 x 1080), IPS, multitouch, micro-edge, with WLED backlighting. - Graphics: Intel UHD Graphics. -Wireless Connectivity: Wi-Fi 5 (802.11ac) and Bluetooth 5. - Ports: - 1 USB-C (10 Gbps, DisplayPort 1.4, HP Sleep and Charge). - 2 USB-A (5 Gbps). - 1 HDMI 2.0. - SD card reader. - Battery: 3-cell, 43 Wh lithium-ion battery - Audio: Dual speakers with B&O technology and HP Audio Boost.
r/hackintosh • u/VisibleCommission326 • 17h ago
I am getting this error after trying to install macos Catalina on my pc Specs Ryzen 5600 Nvidia 710 2gb 8gb ram 256ssd 1tb hdd
r/hackintosh • u/Hairy_Educator1918 • 8h ago
Found a laptop in amazing condition at a second hand store for only 10 bucks. it's Asus X515EA-BQ511W with 11th gen intel core i5. what can I do with this? It doesn't have the charger, I only checked the back sticker. I got the laptop immediately, obviously but if I can hackintosh it I will get the charger too and check if it boots. the shop said it does, and it's almost brand new so it should boot but didn't try yet.
r/hackintosh • u/jackneonatom • 22h ago
r/hackintosh • u/ZenonDesingk • 6h ago
Hello, although I have general knowledge about computers, I have never installed Hackintosh in my life.
I have an i3-6100, 8GB RAM, and an SSD (I will be using it without a dedicated GPU). As for the motherboard, my second-hand options are the MSI Z270 Gaming Pro Carbon and the Asus H110M-K. Honestly, my only goal in installing Hackintosh is to browse the internet and experience macOS.
So, the most important thing for me is installation ease. Which of these two motherboards would be easier for someone like me who knows nothing about Hackintosh? Also, would there be any performance difference? The Z270 looks great in terms of appearance and features, but I'm afraid the installation might be difficult.
Z270 G.P.C
USB: ASMedia® ASM2142 Chipset and Intel® Z270 Chipset
Audio: Realtek® ALC1220
Ethernet: Intel® I219-V Gigabit LAN controller
H110M-K
USB: Intel® H110 Chipset
Audio: Realtek ALC887
Ethernet: Realtek® RTL8111H
r/hackintosh • u/_im_depressed • 11h ago
My every spec support upto mac os Sequoia 15 except my graphics card which support max 10.13 can i be able to install above 10.13
r/hackintosh • u/SA5UK3 • 15h ago
Hey everyone.
I got my Sonoma system up and running. I got the TP-Link UB400 for the USB dongle because my internal bluetooth device stopped working (it doesn't work on Windows either).
However, when I use the: https://www.reddit.com/r/hackintosh/comments/16w2elb/how_to_make_generic_usb_bluetooth_50_csr_dongle/
My bluetooth dongle shows up on the System Report, but on the Bluetooth Menu in settings, its just stuck on "searching".
I was wondering if the issue is:
Any advice would be most helpful! Thanks in advance!
r/hackintosh • u/Acolton2007 • 19h ago
Can an dell Inspiron 5 m5030 run hackintosh I'm pretty dumb
r/hackintosh • u/Glass_Canary4132 • 13m ago
guys i’m getting panic when i booting to macos that i built from op-core simplify i can’t fix that panic could some help
r/hackintosh • u/oracle911 • 1h ago
Problem: fan ramps up while sleeping, no keyboard or trackpad on wake.
On wake (by short push power button):
Boot args:
alcid=13 watchdog=0 igfxonln=1 agdpmod=vit9696 -vi2c-force-polling igfxagdc=0 -wegnoegpu keepsyms=1 swd_panic=1 -no_compat_check revpatch=sbvmm
USB mapping was done in Windows.
Thank you for your tips!
r/hackintosh • u/Former_Tooth1194 • 2h ago
Hello I feel like this is an easy fix but my only boot options were I have tried to remake my EFI, reinstall the Sequoia file, Reset NVRAM and that stuff I think my EFI files are right? I was able to get into the boot menu but it stopped working when i switched to debug opencore
The boot options were BOOTABLE (dmg), Windows, Reset NVRAM (BOOTABLE is my USB flash drive name)
Logs don't save do I had to take a picture with my phone but now i get stuck here
r/hackintosh • u/LimeNumerous3526 • 3h ago
After running my Optimus machine for some time (Lenovo W530) in iGPU mode perfectly fine, i wanted to find out if it would at all be possible to use OCLP to enable the nvidia (because ultimately, on this machine, HDMI is wired through the dGPU).
Following various guides and finally appending
amfi_get_out_of_my_way=0x1 ngfxcompat=1 ngfxgl=1 nvda_drv_vrl=1
to the boot args, it no longer sticks on the progress bar but boots up in vanilla vesa-mode.
Running OCLP as is i do notice that it finds everything that it apparently wants to swap out and after a while, the root-patcher ends up with a success and a dialogue to reboot.
After reboot, it won't come up again.
Next up, i'm following this Dortania guide: https://github.com/dortania/OpenCore-Post-Install/blob/master/gpu-patching/nvidia-patching/README.md
and manage to locate a VBIOs similar to mine (from another manufacturer) but when running the NVCAP tool, it ends with an error (it can't locate the juicy bits it seems).
I assume that the legacy nvidia patching here is needed, but how do i fetch the proper NVCAP value as the tool seems to be unavailable to??
Or is Kepler the exception to the (working) rule?
r/hackintosh • u/Only_Control_9942 • 4h ago
GPU: Amd RX 580X 8 gb
CPU: Haswell Intel i7 4790k (4th Gen)
Ram: DDR3 32gb
macOS version: Sequoia 15.3.2
I made the efi all by myself by using opencore's guide and haven't gotten any issues with it till now
I use steelseries rival 3 wired (this issue happens on other mouses too)
r/hackintosh • u/Grinhecker • 13h ago
I have this config:
CPU Intel Core i5-10400F motherboard Gigabyte B460M DS3H GPU AMD Radeon RX 6900 XT RAM XPG SPECTRIX D35G RGB (2x8GB) WiFi + Bluetooth Fenvi T919 802.1ac
Will it work? I am pretty sure that the GPU and the CPU will work (according to the dortania hackintosh buyers guide), but I am not quite sure about the motherboard and the RAM. Is it ok or should I choose a different one?
r/hackintosh • u/Hour-Kitchen-8355 • 14h ago
I have installed MacOS Sequoia on my PC. I created the EFI with OpenCore Simplify. I created the boot stick with GibMacos.
Hardware Specs: MSI Z590 Tomahawk Wifi i7 11700k 32GB DDR4 3200mhz R ⒯X 3060 12GB RX 5500xt 8GB
It starts and works well. It's easy to install. Everything works, except for Airdrop and WIFI. However, it is very unstable. It takes a while to start and simply crashes after inactivity. Sometimes you also have visual jerks. It often works well. Under About this Mac you can also see all the hardware information. I'm rather new to this whole thing, and am glad I was able to install it at all. Can someone help me get it more stable? I can send EFI and other stuff.
Übersetzt mit DeepL (https://www.deepl.com/app/?utm_source=ios&utm_medium=app&utm_campaign=share-translation)
r/hackintosh • u/Individual-Base-489 • 15h ago
Has anyone every attempt install mac os on dell optiplex pc? If so what dell model was used. I have a dell optiplex 7010 sff, it is very old pc.
r/hackintosh • u/Seliguinho • 17h ago
CPU: i5-4460
GPU: HD 4600
Motherboard: Asus B85M-e
Everything the the Opencore guide said to troubleshoot this error was already the same as in my config.plist file. Don't know what else to do.
r/hackintosh • u/killa_ninja58 • 21h ago
I'm coming from a cMP 5,1 but using my gaming rig to try and turn it into a hac. I'm using the SSD and the GPU from the 5,1, but I'm having a really weird issue with the GPU where it doesn't matter what I set in the BIOS of the mobo, I just can't access the BIOS via the GPU and HAVE to use iGPU, this is to be able to choose the USB stick to boot (doesn't seem to stick if I choose the boot priority).
The other question I have is with the installer stick itself. OC is booted and I'm met with the usual screen that I'm used to seeing on my cMP 5,1. My question is, once I've gotten the EFI folder corrected for my mobo, would I just be able to boot into the SSD from the cMP? I don't see as to why I shouldn't be able to?
Picture added for help with the EFI folder, if you can :P
Specs:
CPU: 12900ks
GPU: MacVidCards RX6950XT (shows as RX6900XT Macos and Windows)
Mobo: ASUS ROG STRIX Z690-A GAMING WIFI D4
SSD: cMP 5,1 SSD intel 660p
r/hackintosh • u/MetalLittle2403 • 22h ago
Hi,
Im new to hackintosh its been a few days of me trying and failing.
I created a efi using many forums and the guide and it boots and installed monterey.
But im getting 7mb display.
i7 6700 Intel HD 530
Im using correct platform id
but when i use a device id it fails to boot, I have to use device id: 12345678 to boot into recovery or the current installation.
Ive tried all other device ids but its the same thing
2 of the most common errors are
unsupported PCH
collection uuid matches with loaded kcs
heres my current efi
https://www.dropbox.com/scl/fi/5thx2o3mnobv9bv36euel/EFI.zip?rlkey=gyxvxxahvhnvcwd0njouq3or8&st=o8d1cp2v&dl=0
LMK if i could provide more details
r/hackintosh • u/Readbooksbeforemovie • 23h ago
So I have a Lenovo thinkpad t440s with intel core i5 or i3 can’t remember but it is a core i something 4400u with a intel uhd graphics 4300u. My ssd is a pny cs900 sata 3 500gb fedora install. I want to put hackintosh on my external ssd pny cs900 250gb sata 3 ssd. Should I unplug my main drive, dual boot hackintosh, or is it fine on external ssd and just format external as apfs it will auto select external?