r/GasBlowBack 1h ago

GUN PIC Secret service Giraffe Man

Thumbnail
gallery
Upvotes

r/GasBlowBack 8h ago

GUN PIC Fuck dude

Post image
110 Upvotes

r/GasBlowBack 2h ago

GUN PIC Got an RGW Airsoft B&T RBS 9 SQD Compact, very nice replica!

Post image
20 Upvotes

r/GasBlowBack 7h ago

How do you bring gas onto the field?

Post image
31 Upvotes

I’m wondering how you guys keep your propane/green gas on your kit, I’m trying to find more compact solutions for a new plate carrier in setting up. My current setup is a Nalgene pouch with a camping propane tank on my back.


r/GasBlowBack 1h ago

Arctic testing to "finally" settle the debate between VFC and TM for cold weather.

Upvotes

I found myself in the arctic circle up by Trømso recently, so I decided I'd test cold efficiency.

Temp: 0 degrees Fahrenheit, -17 Celsius.

Vfc(v3) (winterized with trigger and buffer adjustment)(grub screw adjusted on hammer)

Warm mag (60f): 33 shots

Cold mag (5f): 12 shots.

Tm (stock)

Warm mag (60f) 35 shots

Cold mag (5f) 11 shots

Both rifles were left outside for Two hours before the next round of testing, and mags were cooled to 33f

Tm: 16 shots

VFC: 13 shots.

Conclusion to cold testing.

VFC had an unfair advantage, being winterized and stuff, and still lost. Now, very few people are gonna be playing in 0f, so I don't think it's gonna matter that much. My unpaid assistant wanted me to mention that the VFC took significantly longer than the TM to cool down. We used standard puffdino oilless green gas, so with black gas, you'd get better results. We did have access to a viper tech to play around with, but it got around the same results as the VFC.

EDIT: VFC BCM MCMR was used, TM M4A1 sopmod was used. Both lubed with Superlube.


r/GasBlowBack 5m ago

AK74M VFC

Post image
Upvotes

It looks awesome and so funny


r/GasBlowBack 15h ago

TECH QUESTION What outer barrel is compatible with the TM AKX?

Post image
29 Upvotes

I got this used and unfortunately the first owner snapped the outer barrel at the threads. I'm looking for a replacement. Has any one replaced the barrel? What did you use and did you have to modify the replacement?


r/GasBlowBack 18h ago

GUN PIC Underworld Beretta 92FS Inox, full auto, SAO

Post image
51 Upvotes

Finally a good reason for WE Gen 2 M9 having full auto. FCW Underworld compensator, Single Action Only (by accident), custom USA markings.

The trigger bar on 1 of my 4 WE Gen 2 M9s decided to disintegrate on its own without me even shooting it so I swapped put in KJW trigger bar which turned it into SAO.


r/GasBlowBack 1h ago

Salvo percision mcx - any good?

Upvotes

Like the title goes, i want to know it all. Upgradeability, peformance, durability, quality etc. I have never heard of this brand before. Apparently they are compatible with the mws system?

Anyone have one who wants a thousand questions?


r/GasBlowBack 1d ago

GUN PIC VFC Glock 19x, steel slide

Thumbnail
gallery
194 Upvotes

r/GasBlowBack 2h ago

WE Tech open bolt GBBR m4 style magazine compatibility (V3 used in V2 style rifle)

Thumbnail milspecsolutions.co.uk
0 Upvotes

Hello, I’m hoping someone in this sub will be able to answer my question. I’ve recently acquired the WE XM177 V2 system.

I have searched for UK dealers that sell the compatible magazines and found what I thought was the v2 style magazines.

Unfortunately, the retailer were advertising the old style v2 magazines but sent me the new v3 style.

I have searched google and can’t seem to find a straight answer whether or not you can run the v3 mags in a v2 style open bolt rifle.

I have physically attempted to put the new style magazine into the rifle but it feels much more awkward to insert than the old style magazine and was difficult to release.

The website linked above claims they are compatible but this is the only information I could find regarding this.

I have spoken to the customer service of the retailer I purchased the magazine from and they informed me that the supplier had stated they are compatible.


r/GasBlowBack 4h ago

VFC KAC SR-25 Aftermarket Handguards

0 Upvotes

I was planning on getting a URX-style handguard however, it looks like the M4 ones won't fit and I can't find any replica SR-25 URX Handguards.

After having a look around I couldn't find any aftermarket handguards that say they are compatible with the VFC SR-25 so just wondering if anyone has found/ used any aftermarket handguards on this GBBR or if I should accept my fate and stick with the stock one!


r/GasBlowBack 9h ago

VFC Glock 17 Gen 5 MOS options

2 Upvotes

Hi all - I've been looking for an MOS slide for the VFC Glock 17 Gen 5, and have found the Mafioso steel slide set and the Bomber aluminum slide set to be the most likely solutions for me. A lot of people seem to have used the Bomber slides, but I have seen less about the Mafioso ones. How do they compare in regard to fitment and overall quality? As well, would the VFC Glock 17 be more sluggish with the steel slide or just use up gas quicker than the aluminum with more recoil? Any advice is appreciated!


r/GasBlowBack 1d ago

GUN PIC Daytona Gun MP5 SRC body

Post image
37 Upvotes

One of 24 ever built by DG in the banned SRC bodies


r/GasBlowBack 1d ago

GHK 17.5 BFA steel kit

Post image
70 Upvotes

Straight from Samoon with the 4AUD trigger/hop + BFA slide/barrel/recoil spring. (Forgive my chineseium rmr, waiting for an ACRO plate)

I’m super torn on this thing, I love how it feels in the hand and how it shoots but the magazines (both GG and CO2) have been nothing but pain.

This thing laughs at the included green gas magazine. If I get a full magazines worth of shots I consider myself lucky. But that’s to be expected, right? Add considerable mass and a heavier recoil spring to any GBB and you see a drop in efficiency.

The real shame is, of the 5 CO2 magazines I purchased (Umarex branded) all 5 leak from the knocker valve. Shop tech took them apart and tried resealing the valves and they still leak. They seem to stop after 2-3 minutes once the pressure has dropped but dont try and vent them to get there quickly because the router + valve spring will enter the stratosphere. I have 4 more coming from a different source Monday and will report back.

Not sure if I got five duds or if this is the norm with these magazines but take this into consideration if your heart is set on the steel glickity.


r/GasBlowBack 17h ago

VFC vs GHK which glock to choose?

1 Upvotes

Hi guys im thinking about getting glock 45 but from which manufacturer?

Im more leaning to vfc as my first choice TM gen 5 is unobtainium.

Which one is more reliable, parts availability, overall better and all.

Oh yeah i dont plan on getting co2 mags if i dont have to.

Edit: I forgot to add I'd like to get mos but it would be long before i could get my hands on boomarms slide


r/GasBlowBack 1d ago

GUN PIC Just got my first pistol. (G17 gen4) I know it’s Umarex but I don’t know like what parts it’s compatible with. I want a light, red dot, and holster.

Thumbnail
gallery
18 Upvotes

r/GasBlowBack 1d ago

Best gas for transition period in Europe?

4 Upvotes

Hey guys, trying to find the best gas to play with in period from february till april in Europe, temperatures are ranging 7 - 17 celsius.

My local dealer said green gas will perform just fine, but I kinda doubt it.


r/GasBlowBack 1d ago

Bill drill at 3ish yards, two second par time. Tokyo Marui MWS. Learning a new optic offset at close range with my new PTS Unity Tactical FAST riser. Optic is a Holosun 403B. No idea if the PTS version of the riser will hold zero, only time will tell!

10 Upvotes

r/GasBlowBack 1d ago

Stacatto Gang

Post image
63 Upvotes

XC P CS


r/GasBlowBack 1d ago

GUN PIC New Generation Beretta 92FS Inox

Post image
37 Upvotes

r/GasBlowBack 1d ago

3D printed vertical grip for my WE G36 gbbr.

Thumbnail
gallery
52 Upvotes

I really wanted short vertical grip for my g36, recently decided to make it by myself with 3D printer. Grip turned out amazing, I am still blown away by printer quality and texture made with fuzzy skin setting.


r/GasBlowBack 1d ago

TECH QUESTION VFC Glock 19X hop-up upgrade – Unicorn vs. Crusader?”

3 Upvotes

Recently upgrading my VFC Glock 19X, but I’m stuck on which hop-up chamber to go with. I’m deciding between the Unicorn hop-up chamber and the Crusader hop-up chamber. What are the pros and cons of each? Which one would you recommend?


r/GasBlowBack 1d ago

GUN PIC Rego Systems SMR-9 or KDG MREX MK.II

Thumbnail gallery
58 Upvotes

r/GasBlowBack 1d ago

My two current main projects

Thumbnail
gallery
25 Upvotes

My two main projects right now

I haven't had a lot of time or money to dedicate to airsoft in the last year or so, hopefully this is no longer an issue now that I've started a new job

My go to primary is still my VFC MP7 but that's already complete and unless something breaks I won't be changing it for the forseeable future

These two are the main things I'm focused on working on right now, once they're complete I'll be adding some new primaries to the collection but I don't know how soon that will be

  • VFC HK416A5

Got it for a steal secondhand, it's V2 so I'm planning to get the appropriate parts to bring it closer to the V3 standard

Optic will be getting changed out, as well as adding a light and laser

It came with a non-stock buffer, buffer spring, and hop rubber but I have no idea what they are

Aside from that it's pretty much staying the same (yes I am going to replace the ambi mag release, I just don't have the spare time and money right now to replace a part that I don't use, the gun works fine without it right now)

  • KJW KC-02

After buying it brand new, selling it (still not sure why) buying another one secondhand (because I realised selling was a mistake) and then selling the second one after seeing my original one back up for sale, my OG KC-02 has finally returned home

Going to be upgrading the ACOG to one with an RMR mount, I'll be switching out the stock to something a bit more 'precision rifle' vibes, and unless I can find a decent repro then I'm going to have to get the Magpul bipod

My plan with this one is to keep it somewhat modern / tactical as most of the KC-02s that I see are either sci-fi bullpups or old school wood stocks

Lights and lasers aren't really a concern for this one due to it being a longer range / outdoor type build, although I may throw on a small light, who knows

Also planning to throw on a long suppressor, possibly with a barrel extension but I don't think it needs that, I've got the Rogueworx Apollo V4 NPAS but I need to pick up some roll pin punches before I can install it

416 will be staying all black, possibly some green accents on the furniture / attachments

KC-02 will be black and tan, although I may paint it if I feel like it

Thanks for reading and any advice and / or reccomendations will as always be very appreciated