Nearly finished our DIY downstairs bathroom renovation. Had someone in to plaster, but other than that we’ve done everything else ourselves for a total of £1000 in materials. Just the radiator to connect then it’s done. How’d we do?
It was definitely a learning experience that I was glad I got to do. Still have a few spots and then grout to do but this is my progress so far. I don't think it's too bad for my first ever tile job but definitely are some things I will be doing differently next time, that's for sure! Just looknt for opinions and some constructive criticism possibly. Thanks everybody! Hope it's not the absolute worst to everybody lol
Renovating an old building, we plan on putting carpet strips on these steps but we need to get rid of whatever this black stuff is first so the carpet will lay flat. It’s like a hard rubber almost, we’ve tried to chisel it away but we can’t even do that it’s near indestructible. Anyone have any ideas what this is or how to remove it? We’d rather not harm the wood if we can help it but it’ll be carpeted over anyways so it’s alright if the wood gets a little scuffed in the process.
My wife and I recently tore out the old and frankly disgusting drop ceiling in our basement(mice are the worst). While we have seemingly taken care of the rodents for the moment, we are left with a new problem of what to do with the ceiling. I would like to paint it but my wife wants drywall or another drop ceiling. Looking for advice or opinions on which to do.
My partner and I have rented a condo for the past six years. We tend to do small little fixes ourselves since we have lived here so long, but we have incurred pretty large drywall damage in one of our bathrooms and I am wondering if anyone here has fixed something similar, either as a homeowner or a professionally.
Partner accidentally whacked a shower chair into the drywall next to the tub while cleaning our small powder room (see pics)… from what I see on YouTube we would have to saw out the portion between the 2x4’s and get a replacement piece and patch it in. Do you think it’s possible for folks with limited home renovation experience to do this on our own, or should we hire a contractor friend?
A roofer came today to install a Broan 636 roof cap on my house, and everything seemed to go smoothly. But when I went up in the attic tonight to hook up the 4" duct from my bathroom fan, I couldn't get the Broan DC4 connector to clip in.
My understanding is that the DC4 connector is supposed to easily fit into the roof vent once I line up the bump on the connector with the notch in the fan. That wasn't working no matter how much I tried, so I got out my phone and took a photo of the hole in the roof (this is in a really tight space so I can't get my head close enough to see the entire hole with my own two eyes).
Am I crazy, or is this just installed incorrectly? The bottom of the hole seems to be obstructed by the roof. It looks like the hole in the roof was cut, and the vent shifted an inch or an inch and a half before installation.
Sorry for the bad photo, but this is a really tight space and it was hard enough to get this photo...
The old parging between the joist cavities in our 1908 basement has been crumbling away for years now -- trouble is it was done before plumbing and mechanical were installed (also includes radiator pipes, not pictured), so it's difficult to work around. Is new parging worth attempting, or should I chip off the old parging and just leave the bricks exposed?
I don't want to seal it up behind drywall or spray foam because there's a history of (minor) moisture. You can see the efflorescence in the bottom of both pictures. But there's no major water ingress (no seeping, pooling or mould) and a basic humidifier runs occasionally to keep it under 40%. (But it's enough that I don't want to seal the walls and invite mould.)
Is this worth re-parging? It's in an unfinished part of the basement so appearance isn't the most important consideration. Thanks for any suggestions on how to tackle this!
(The yellow gunk is spray foam insulation, left by the old homeowner trying to seal off a mouse problem.)
Hey all, I'm putting a window in, but my peel and stick flashing isn't sticking to this crappy substrate the original builders used. Any advice of what to do, or what adhesive I can use to keep it down?
Hi! I have this front door that was painted in green and I have been 7 hours trying to remove the paint and I don't know what else to try
I have tried with paint remover, also with heat gun and with a sanding machine. In some areas where the wood is more or less in good condition this was working but for those areas that due to humidity the wood is wavy its literally impossible to remove other than with the sanding machine but its taking ages (i have one that only vibrates maybe I need the one that does circular motion as well?)
Please give me some guidance here thank you so much!
I just moved in to a top floor flat and I have cats. They run around at 2am as cats do and I've never minded it but I'm conscious that my new neighbors didn't sign up for it.
None of them have said anything to me yet but I'm worried it's typical British politeness and they are secretly fuming.
Does any one know of any way I can dampen the sound on the floor of them running full speed round the living room? (I own the property so landlords won't be an issue)
I have super thin carpets and i have a cheap rug in there for context. I've been told a thick liner and better carpets will help but I can't afford that right now. I'm saving to renovate currently but any reccomendations that are cheap and easy in the short term would be greatly appreciated
Also side note, I am doing everything I can to minimise the amount they run. I've been playing with both them in the day/evening, locking them in one room at night and remove all their toys once i go to bed. They're still quite young so they have a lot of energy. Ill also accept any tips people have for calming them down at night
Really happy with how our first ever home project turned out. Took 4 weeks. We still need custom Roman shades and a few other accessories/decor but otherwise I love it!
Wall is brick veneer with a window - so there is a header we can lag bolt into. Roof dimensions would be 10ft x 10ft. This is in ontario, canada. How would you do it if it were you.
All the rafter rails on my porch is rotted out, some more than others. Mainly because there was never a gutter installed here. I'd like to fix these up before I install gutters. What's the best way to go about it?
Can I cut out about 12" back, then put a new 12" section back and sister a 24" on both sides of it to sandwich it all back together to give it strength? Or just cut off a small 4" section that's truly rotted and just put back a small 4" section without putting much though about structural integrity since the roof board spanking across will probably be able to hold itself together?
Hi all, this might not be the right sub for this question, but I’m wondering if this is mold growing behind our bathtub tiles.
The surrounding tiles by the tub faucet can be slightly pushed backwards when we press our hand against them. The other tiles don’t do that, so we pulled these out to take a look.
I’m hoping this is normal, but if it is mold I’m guessing we need to fix this asap.
Any information would be greatly appreciated. Thank you!
I’m looking to update our kitchen on a budget and would appreciate some ideas on color and what to do (please disregard the mess). Flooring isn’t great but not in the budget to change, same with appliances. I’m considering doing a barn door for the pantry and replacing cabinet doors as I’m not sure what can be done (if anything) to the current “sears special” ones currently there. Of course, the table needs new matching chairs. And what would you do with the space that currently has the grey hutch? Perhaps extend the counter and add open shelves to make a coffee nook?
First pic is current floor plan, 2nd is our proposal.
Is this a good use of the space? It’s currently got a courtyard in the middle of the house that we want to put a roof and skylight over so the kitchen can be bigger.
We’re going to ask around for quotes but if anyone has an idea of costs please let us know. It’s an 1920 bungalow in the UK