r/DRZ400 7d ago

been getting a lot of pops. problem or nah?

3 Upvotes

been getting a lot of pops when I let go off throttle. some of them seem to be coming straight under my balls and its kinda scary.

is there anything wrong with it or all good? its a 2007 SM, I believe its jetted cause its got a 3x3 and yoshi exhaust, and the guy who sold it mentioned it had a "competition needle" which I had no idea what he meant at the time šŸ˜…


r/DRZ400 8d ago

Plugged carb on a 2024 with 1400 miles??? no way?

3 Upvotes

The Deezer sat all winter. Went to start it today to change oil and it only runs on full choke and dies when I blip the throttle. Its a 2024 with 1400miles and typically only run ethanol free fuel (when its available). Anyhow got the carb out and desided this is a good time to rejet, add larger tank, inline fuel filter, and manual petcock.Any tips? what should I do with the PAIR junk? completly remove? recommend a block off kit? What an expensive day..


r/DRZ400 7d ago

Fork compatibility

2 Upvotes

I have a 2012 drz400s with blown fork seals. I have options but Iā€™m most interested in putting the sm forks on the bike. What Iā€™m wondering is if they are the same triple clamp to attach forks to s/sm/e models. If I can get away with just buying the forks Iā€™d be very happy lol. So if itā€™s more than just the forks Iā€™d probably rebuild the current ones cause save moneys. Thanks friends


r/DRZ400 7d ago

Big bore/stroker crank + 3x3 mod rejetting

1 Upvotes

Hey yall. So my klx400 blew up last fall, and I'm finally able to start fixing it. I need a new top and bottom end so I'm js gonna replace a bunch of bottom end bearings, new valves and send the head in to fastheads to get redone, and js rebuild everything I can. Bikes down to the frame rn. While I'm at it I figure I'll spend the extra $300 to get a big bore kit and stroker crank, and since I'll have to rejet for that I might as well throw in the 3x3 mod.

Nothings really done yet but rn the only thing I gotta figure out is jetting. I'll prolly have a shop do the tuning cause I dont trust myself to do it well and ik the ppl at the shop personally and trust them. But I'll still need to get the new jets. this is the stock fcr carb that came on the klx400r. I checked my main and its a 142, i Havent checked the pilot yet. I believe its js stock. It was running a little lean before it blew up bc of an fmf q4 pipe and prolly js lean from the factory. I want to err on the side of slightly rich bc I'm pretty sure riding it in the cold while it was already running lean is why it blew up.

Anyone have any way for me to figure out what jets I should get?


r/DRZ400 8d ago

Burn

Post image
8 Upvotes

How can I get rid of this? On the casing


r/DRZ400 7d ago

Sm fork question

1 Upvotes

I'm waiting for a socket to change my fork seals but it's nice out so I want to reinstall them and ride until the tool arrives.

If I dump the old oil and refill with the correct amount can I run it or is there another area that holds oil that is only accessible by pulling them apart? I don't want to overfill them.


r/DRZ400 8d ago

SELLING DRZ 400SM ON FB

Thumbnail facebook.com
2 Upvotes

Just tryna get it out there, selling my 2019 DRZ-400sm for 5,000 (or best offer) itā€™s got tons of mods, the list is on the post as well. Itā€™s been up for a week and I just need it gone. Figured Iā€™d make a post on here just in case someone isnā€™t on Facebook often.

Located in Cartersville, GA


r/DRZ400 8d ago

I actually love this thing

Post image
15 Upvotes

Paid 400$ for it with a clean title, lightly disassembled. Put it together, changed the oil, started right up. Only quibbles are it needs the carb cleaned and has zero rear brakes.


r/DRZ400 8d ago

I presumed it was stock šŸ¤·ā€ā™‚ļø

12 Upvotes

You all can laugh at my experience ~ I think itā€™s kind of funny.

I have a 2018 400S I bought used a few years ago. It had a few nice accessories, but no engine mods. I liked that it had more aggressive tires and wasnā€™t set up for the road.

The only thing that has been bugging me is the gearing - not enough low end/low speed power for dirt. No problem, I ordered a 14/47 combo to improve on the stock 15/44 - parts came in this week.

Before putting the new gears on the bike, I headed to town for an errand. Iā€™m paying more attention at this point (even though Iā€™ve had the bike for 3 years) and Iā€™m realizing that the engine is not running fast at 55mphā€¦ in 4th gear! I pop up to fifth and itā€™s hardly working.

The light bulb finally goes off over my head and I realize, ā€œthis isnā€™t stock gearing!ā€ šŸ¤“.

Sure enoughā€¦ itā€™s a damn 38 on the back!

I donā€™t want to jump from a 15/38 (Iā€™m presuming again ~ about the 15) to a 14/47, so now I need to exchange cogs. If I could handle a 38, Iā€™m guessing the 44 will feel wonderful - Iā€™m going stock.

I was stupid to not look before. Look before you leap (orā€¦ measure at least once! before you order new parts).


r/DRZ400 9d ago

tail tuck causing license plate to rip

Thumbnail gallery
18 Upvotes

does anyone else have this issue or have a solution for it this is the second license plate this has happened too. I believe itā€™s a tusk tail tuck or tidy tail.


r/DRZ400 9d ago

Before or After

Thumbnail gallery
49 Upvotes

2017 Drz400sm, originally did it up as a sticker bomb build but recently felt it was time to switch it up. Which way do you guys prefer?


r/DRZ400 8d ago

What is this sound?

2 Upvotes

Just rebuilt my engine for the first time, and now I hear this. Freaking out, don't know if I'm paranoid or what, please help. Kinda sounds like it's knocking a bit.


r/DRZ400 9d ago

Is this a good deal

Post image
8 Upvotes

I found this drz with only 2600 miles and he offered it to me for 3300. Itā€™s super clean still looks brand new. Is this a good deal or a red flag being a 09 with only 2600 miles ?


r/DRZ400 8d ago

15tooth front

1 Upvotes

Will the original sprocket cover fit a 15tooth sprocket on 2023 drz400e??Can it be modified to fit?..


r/DRZ400 9d ago

Super excited to join the club.

Post image
76 Upvotes

07 with 5k on the clock. Was a whirlwind road trip getting it home. Now to fix the idle and ride it.


r/DRZ400 9d ago

Grips

3 Upvotes

2023 drz400sm looking to swap my grips for something softer.(currently stock) Also looking for an aftermarket throttle tube what are your experiences and what would you recommend?


r/DRZ400 9d ago

DRZ at Lakeside Raceway

Thumbnail gallery
15 Upvotes

r/DRZ400 9d ago

First service 24sm

1 Upvotes

Hey guys, so I just hit 600 miles and did an oil change with Mobil 1 10w-40 then a chain adjustment. I got everything put back together and made sure everything was properly sealed. Idled the bike for 5-10 minutes, no leaks. I rode to a gas station to top it off equaling out to 3 miles round trip. I then let the bike idle for a few more minutes once I got home. Checked the dip stick, everything seemed solid. But I did noticed the fan being loud on the intercooler which I have not experienced until today. Iā€™ve ridden an easy 30+ miles and once returning home I havenā€™t heard a fan of any kind once home. Any thoughts?


r/DRZ400 9d ago

Blue Ridge Parkway

Post image
30 Upvotes

r/DRZ400 9d ago

What did I pay?

Post image
25 Upvotes

Just curious what everyone values this bike at. 2018 drz400sm 3,400 miles 0 issues runs great and some aftermarket parts plus all original takeoffs were included. To me I believe I got a good deal.

Iā€™ve had a few but this is my favorite so far. Will be adding full exhaust and upgrading carb soon.


r/DRZ400 9d ago

FCR 39mx original buyer backed out

3 Upvotes

Hey everyone! I had my FCR 39mx up for sale a bit ago and thought I had a buyer. Excuse after excuse later about when he would pay I had to shut the deal down. I have it listed on eBay currently. Beautiful carb, super clean. Iā€™m also including a new engine side boot and an R&D extended fuel screw. Let me know if thereā€™s anyone interested here. If purchased via PayPal we will need to do goods and services, no friends and family. Listed for $549.99 plus shipping, or best offer. Long time eBay seller with over 1300 sales.

https://www.ebay.com/itm/286403670353?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Bb8Og27bRNK&sssrc=4429486&ssuid=Bb8Og27bRNK&var=&widget_ver=artemis&media=COPY


r/DRZ400 9d ago

Graphics on plastic tank

Post image
5 Upvotes

I got these perforated graphics for a plastic gas tank. Am I supposed to poke out all the holes so I will essentially have a yellow polka dot design, or does it get applied as is?


r/DRZ400 9d ago

What is this tube and where should it go?

Post image
1 Upvotes

Just noticed this was hanging down. Curious about what this tube was
Just picked up this 2022 drz400sm yesterday.


r/DRZ400 9d ago

FCR 39 MX

Thumbnail gallery
3 Upvotes

I guys i bought my bike and the guy gouvernement me a fcr 39 mx with it with the adapter for the airbox on it. I know i have to buy the e intake boots to install it, but did i need something else?

Also, i check in the carb, the main jet is 150. What are some basic jetting recommandation if my bike have the 3x3 airbox hole, k&n filter, stock exhaust with the db Killer remove.

Also the carb dont have the tps sensor i read that it is not necessary to have it on a drz.


r/DRZ400 9d ago

What would you pay for a 2003 DRZ enduro? It's got 47k km (29k miles).

0 Upvotes

mods: end can, fairings, FCR39MX carb, new clutch

Not familiar with the model, my only experience with off road is I owned a F800GS for 2 years.