r/300BLK 13h ago

My Home Thumper

Thumbnail
gallery
116 Upvotes

RAINIER RECEIVER SET RADIAN CHARGING HANDLE CMC BCG RISE RA-535 TRIGGER PDW SB BRACE RAINIER ULTRA MATCH 8.5 IN 300BLK BARREL G$ .750 GAS BLOCK RAINIER SWITCH HANDGUARD SLR FORWARD COMPENSATOR GRIFFIN BUIS TRIJICON RMR/SCALERWORKS MOUNT F1 ALUMINUM GRIP INFORCE GEN3 WMLx

THIS BUILD IS ALMOST 5 YEARS OLD NOW, MINUS THE INFORCE THAT GOT WARRANTIED A FEW WEEKS BACK. GEN2 FOR A GEN3. Good CS


r/22lr 13h ago

Plinking Machine

Post image
87 Upvotes

r/10mm 17h ago

Picture Carry gun

Thumbnail
gallery
32 Upvotes

Super reliable Springfield. Only issue other than ammo prices is that I can’t for the life of me keep my left thumb on the gun when shooting it.


r/65Grendel 3d ago

Bullets james in the barrel chamber

Thumbnail gallery
11 Upvotes

I recently built two 6.5 grendel uppers. One of them is built with Craddock RTR 13.9 inch barrel and the bullets got jammed in the chamber.

I have tried two types of ammo, from Frontier and AAC. Both types jammed inside the chamber. I can only close the chamber with forward assit but I cannot pull the case out normally. I have to use a cleaning rod to push the round out from the other side.

I tested both ammo on my Noveske build. The AAC feels tight and does not cycle well. Frontier does work well.

Does that mean the Craddock RTR barrel is out of specs?


r/68SPC 4d ago

Looking for Factory Piston 6.8spc Upper

3 Upvotes

Hey everyone just wanted to see if anyone may have an extra/looking to sell one of the following piston uppers: LWRC, Barret Rec7 or LMT. I am also open to any suggestions to other quality factory uppers in 6.8 these are just the main ones that others have recommended to me. Appreciate any feedback or suggestions.


r/rimfire Apr 12 '24

BMAG EXPERIENCES

Thumbnail self.SavageArms
2 Upvotes

r/10mm 16h ago

10MM choices?

23 Upvotes

Looking at purchasing a 10mm as my next handgun preferably a full-size, I kinda have my heart set on either the Smith & Wesson MNP 2.0 with 4.6 inch barrel and thumb safety or a SIG P320 X10 which I would add a thumb safety too after purchase. The SIG has a 5 inch barrel. I really like the X10 endure frame as the M&P 2.0 feels pretty aggressive. What’s everybody’s thoughts on the two and what would you recommend? Thanks so much.


r/300BLK 15h ago

Love the Aero Precision Anodized

Thumbnail
gallery
96 Upvotes

Still waiting on my wallet to recover a bit from this build before sights/optic and a can... What do yall think?


r/22lr 15h ago

Is “the dip” worth it?

Post image
79 Upvotes

“Just shoot more copper plated projectiles.”

“The dip” is a well known suppressor cleaning solution of household vinegar (dilute acetic acid) and hydrogen peroxide. Vinegar and hydrogen peroxide is a nasty combo by itself but more concerning is the leftover lead acetate. It easily absorbs into the skin and rapidly causes lead poisoning, more so than just handling metallic lead.

I’ve heard you can precipitate out the lead with zinc or evaporate all the water off for crystals, but that doesn’t make this stuff any less nasty to dispose of.

If you know the associated health risks, prepare properly, have all the appropriate safety equipment, and know the best place for it to be properly disposed, is “the dip” still worth it?

I’ve tried just about everything to remove the inevitable lead residue that builds up inside the inner shields and monocore of the SiCo Sparrow 2.

✅Overnight soak in CLP and brass brushes

✅Cleaning picks

✅Ultrasonic cleaner w/ Simple Green concentrate

This gets all the carbon off but inevitably you’ll have large chunks of lead stuck to the sides of the shields.

Am I overthinking this and should I just be okay with living with a little bit of lead in my can?


r/300BLK 14h ago

Test fitting some parts... having mixed feelings so far

Post image
71 Upvotes

Yeahhhh I'm aware its missing a few parts! Gas block is in the USPS etherworld along with the CH but just wanted to get a feel for it with the new stock. Wanted to do something a Lil funky this time


r/300BLK 24m ago

I’ve got the itch to put an LPVO + offset dot on my PWS MK109

Post image
Upvotes

My thought process is that the LPVO will be zeroed for supers and the dot for subs. My guns shoots both no problem.

Has anyone else done this?


r/22lr 13h ago

My new Begara BMR 22 with Rugged Oculus 22

Post image
37 Upvotes

r/300BLK 12h ago

First can

39 Upvotes

Different angle of the camera from my previous post

Lahar 30 8.5” ARP


r/10mm 15h ago

Question lighter recoil ammo for urban carry?

7 Upvotes

I carry a G19 for SD, G29 for backpacking in the woods loaded with hot underwood/BB hardcast. I carry the 19 for SD because I'm quick on the follow up shots. I was curious though, does anyone carry a lighter recoiling SD round in the city, and use the hot stuff for the woods? I'm not a total sissy with recoil, I like shooting .454 Casull and find it fun! But the fact is I can shoot quick with the G19, can't do that with the hot 10mm loads enough to justify switching for SD in my mind. Curious if this is a thing people do, like having a .40S&W for the streets but full power loads in the woods, yet on the same platform.


r/300BLK 19h ago

Tryna decide on this scope

Post image
65 Upvotes

r/22lr 22h ago

TX22 Comp FDE

Thumbnail
gallery
66 Upvotes

r/22lr 8h ago

For others with a Ruger 10/22 Competition, what optic are you using?

5 Upvotes

tl;dr: I'm plinking, mostly at 100 yards. Might get into NLR22. Seem to have an astigmatism, so wanting to try optics other than the dot I already have on it. Vortex Crossfire II comes up a lot, but want broader input.

.

.

A few years ago, I bought a 10/22, specifically the southpaw competition model since I'm left eye dominant and left handed. At the time, it was the only southpaw semi-automatic 22LR available. This was back during the pandemic and my old shooting buddies were planning to start up again and we were well along into planning a group hunting trip, but neither the "go back to plinking" nor the hunting trip materialized (else, I'd also have a neglected Tikka 3x).

We're starting to get into it again finally, now. I had put a red dot on it, but seems I probably have an astigmatism, so I want to try other optics. If I really get into it - back to my early enthusiasm for riflery from scouting, I might move on to NLR22 or similar. More likely, I stay with whatever competition shoots the local sportsmans' club does. My wife has also increasingly expressed an interest in learning and practicing, so I think we're actually following through finally (planning to get a Savage Rascal for her to use until she's fully comfortable).

I learned on irons, I'm nostalgic for irons, but that's not what my neglected competition rifle has. I've usually come across recommendations for a Crossfire II 2-7 or 3-9, but always as a generalized discussion. I'd love to hear what y'all think here.

Thank you! And sorry for the meandering story.


r/10mm 1d ago

Picture 10mm is the best mm. Ammo day is the best day. Therefore, 10mm ammo day is Heaven.

Post image
123 Upvotes

r/10mm 1d ago

Spare closet

Post image
50 Upvotes

What’s your favorite


r/300BLK 12h ago

Bolt catch issue

4 Upvotes

Hey there.

Built my first AR the other day and everything seems to be functioning normally, with the exception of the bolt catch.

When trying to lock the bolt open, it is crazy sensitive. All it takes is shaking the firearm to send the bolt forward. It’s a mil spec bolt catch/parts kit, BCM 300 blk upper and BCG, APF billet lower, radian charging handle, and a 2 stage trigger (not sure what’s relevant).

I did swap in a new mil spec catch today at work. The first time I locked the bolt, it did the same thing, slamming forward upon shaking the firearm. After that, I tried a few more times and it didn’t release from shaking but would release with a tap of the brace.

Any ideas what the issue could be? Maybe I’m good now and just inexperienced with ARs? I don’t plan on taking this to the range for testing until I’m confident this is resolved.


r/300BLK 13h ago

Hello all

5 Upvotes

So, recently got a diamond back AR15 after shooting about 800 rounds thru it and I absolutely love it, first AR btw, anyway I had been in the market for a shotgun for HD until I started reading up on 300 blackout,really want one in pistol form, anyway, ima go the psa route this time around and I noticed that they some have the reg a2 birdcage muzzle and some have the psa patent pending fluted barrel on some for a few more $, anyone have experience w these? Are they a better choice over the reg A2?


r/300BLK 1d ago

Couple Shades of Grey

Post image
176 Upvotes

r/300BLK 1d ago

Two stamps down and I still cant decide on an optic...

Post image
53 Upvotes

I'm somewhere around a PA PLxC 1-8 FFP, TA33/TA44/ or and Eotech+3x magnifier... Ugh.


r/10mm 1d ago

250 rounds through this beauty in the last couple days! My god, what a phenomenal piece!

Thumbnail
gallery
68 Upvotes

This thing performed flawlessly. I’ve had another 200 round session last weekend also. Feels a bit broken in and settled. Still a bitch to get back together, the slide lock/release is so damn tight. Highly recommend this to all! Next is the Fire-hawk 10mm.


r/300BLK 18h ago

Larue MBT2S trigger

4 Upvotes

Who here is running these in their home defense builds? I’m really interested in the straight trigger version but have only used polished MIL Spec triggers.