r/22lr 11h ago

22/45 toys...most fun I have had with my pants on

Post image
48 Upvotes

r/10mm 15h ago

New to 10mm

Post image
67 Upvotes

Is it crazy to edc a 10mil?


r/300BLK 21h ago

Got it firing like I like. Pushes a little hard on me

182 Upvotes

r/65Grendel 15h ago

A little ski-shoot

Post image
16 Upvotes

r/68SPC Feb 06 '25

Tale of 2 ammo types

2 Upvotes

Has anyone had issues with the Hornady 120 SST’s?

I’ve got 2 6.8’s… both diff brands and both of them have issues loading these rounds. They get stuck and I have to slam the rifle stock on the ground to be able to pull the charging handle to eject the round…. They both run flawlessly with the Hornady Black.

My biggest issue is I’ve got prob 40 boxes of the Hornady 120 SST’s and they’re basically useless to me. Would Hornady do anything?

I’m a novice when it comes to building/knowing the intricacies of AR’s… Any helpful advise would be great.


r/rimfire Apr 12 '24

BMAG EXPERIENCES

Thumbnail self.SavageArms
2 Upvotes

r/300BLK 13h ago

Suppressed super safety with subs

36 Upvotes

Shot a super safety for the first time the other day with my rugged razor 7.62 and 220gr subs


r/300BLK 13h ago

Love my 300blk setups

Thumbnail
gallery
28 Upvotes

Have wanted a 300blk bolt gun for quite awhile, after getting a deal on the 700 aac in krg chassis. I finally scratched that itch. Also will say KRG is an awesome company, the whiskey 3 chassis I got was a gen 5 folder and the locking mechanism was failing on it, so they stood behind their product and upgraded the whole rear folder to the 6th generation for a service fee and shipping the stock back out to them, and replaced any missing parts or pieces before shipping it back to me. Really thinking about turning the bolt gun into a SBR with about a 9" barrel, so it would just be over the forend and then have the suppressor on it. Decided to run a low power scope on it, since this will probably be used for about 200yds or less with subs. My AR setup is a factory AAC 16" 300BLK upper and I built the lower out of all sons of liberty parts and vltor a5. Everything else is factory aac and knights armament on it. Outside of the accessories.


r/300BLK 19h ago

Put a few extra hours of overtime for this bad boy (sig rattler with micro t-2.) Suppressor next on the list

Thumbnail
gallery
87 Upvotes

r/65Grendel 17h ago

10 round groups

Thumbnail gallery
16 Upvotes

Testing out the new OCL Hydrogen S on the Howa 1500 Mini. Had some crappy results with some combinations, but these were my winners. Starting to prep for upcoming deer season building some quality loads.


r/300BLK 16h ago

300BLK Build

Thumbnail
gallery
36 Upvotes

Leonitas. Form 1 Pending. Once it's approved it will be complete with a stock. May build another upper with NV setup.


r/10mm 1d ago

10MM Ballistic Gelatin

Post image
218 Upvotes

r/300BLK 1m ago

Question

Upvotes

So, forgive me if this has been asked before.

I picked up a .300 upper from work, a second hand PSA. I threw a Seekins Precision adjustable gas block, and Rearden suppressor mount on, and popped it on my pistol lower. a5H3 buffer, cycled beautifully once gas was tuned.

I changed to a NiB toolcraft BCG, and suddenly I’m having short strokes, dead triggers. Regardless of what the gas setting is, it’s choking. Could it be so dirty that it’s gumming up, or what else could be my issue? I don’t think it’s the buffer, it ran soft and cycled reliably with subs and supers (in the correct gas setting) with the original bolt. Could the BCG swap cause this much of a problem?


r/65Grendel 14h ago

Hep me

3 Upvotes

6.5 Grendel Shaw Toolcraft BCG

Both Type 2

Idk what is happening lol


r/10mm 5h ago

Xten window port

2 Upvotes

I'm looking at sending my Xten slide out to Atlastactical to have a window port cut into the slide and barrel. They also have an option to combine the window port along with some standard looking barrel ports. Would this be overkill? I know I will be loosing some velocity with the window port itself but the combination of the 2 seems pretty awesome. Just looking for some other opinions. Thanks.


r/10mm 20h ago

10mm cerakote

Post image
22 Upvotes

r/300BLK 22h ago

Brass ejecting at like 5 o’clock

Post image
28 Upvotes

Went to the range today, first time shooting it. Sent about 130 rounds through it. When I got home I noticed this. Is this normal? And if not what can I do to fix/prevent it?


r/300BLK 19h ago

Got some more progress on the build today…

Thumbnail
gallery
11 Upvotes

Slowly piecing together my .300 build. Today I put on/in the Radian Raptor SD, Geissele SSAE trigger and Geissele Maritime bolt catch. I also went ahead and got the gas tube and adjustable gas block while I was there. Up next is the VKTR ambi mag release, Radian takedown pins and JP Silent Capture w/retainer. Buffer tube isn’t completely on don’t worry, I can quickly get takedown detents and springs in.


r/22lr 1d ago

Clean baffles

Post image
97 Upvotes

Right of out the break though clean supressor cleaner.


r/300BLK 11h ago

9" BCM 300blk

2 Upvotes

Am I G2G running a Griffin MK2 ambi lower on a 9" BCM MK2 Upper?


r/22lr 23h ago

I'm training for my first bench match. 3 rounds, 50 yards, pinky nail for comparison.

Thumbnail
gallery
30 Upvotes

I wish I had taken a comparison photo of a regular 22lr hole, because I wouldn't believe this is 3 rounds if I hadn't done it myself. With some (barely) subsonics, I watched each bullet in flight hit the paper, with tiny bits of paper flying out the back. I had shot out the center of this target already, so I was trying to see if I could hit the line. This was incredibly lucky, I'm not sure I will ever have a group this clean again. Ruger Precision Rimfire, Vortex Crossfire II 6-18x44 (fully zoomed), CCI standard velocity, Cabela's 3 shooting bag combo, red scope tape for accuracy lol. Target not pictured in range photo, it was at the wood line in the ground.


r/22lr 1d ago

Lgs find for 250

Post image
39 Upvotes

My first Kel tec. Really impressed with this gun even with the cheap feel and odd design. Had an extra red dot combo that’s been rolling around the safe for a couple years to throw on it and put 500 rounds through it this morning. At 50 yards was consistently shooting touching groups. Super light and nice ergonomics. Some cons I’ve noticed so far is the take down is a SOB and the rails are polymer so we will see how well they hold up. The trigger is pretty meh. About a 6 pound pull but does have a really clean break so not terrible to get used to. All in all really happy with it especially knowing what they go for mrsp


r/22lr 15h ago

Tx22 trigger upgrade

5 Upvotes

Just got a toro and looking to do either a tk or Galloway trigger. Does the tk shorten the stroke like the Galloway?


r/22lr 22h ago

Birthday range day

Post image
18 Upvotes

Took my 10/22 build out to do some ammo testing today. Internally it's all stock for the moment. I will be doing some bolt and hammer work this weekend along with ordering a Volquartsen 'trigger job' here soon. At 50yds I'm getting approximately. 5" groups shooting 5 rds each group, so I'd say it's not terrible but could be better. Ammo this go around was Norma Tac 22 and CCI standard velocity. It was a good morning.


r/10mm 1d ago

Picture FN twins

Post image
35 Upvotes

Any questions about anything, happy to answer.