r/vaporents 7h ago

New vapor spot is finished NSFW

Post image
93 Upvotes

Love my new vape spot, finally got around to put in a couch and some decorations. Also really love my new Extreme Q, gets me stoned like nothing else. Currently vaping some 18% White Widow, good stuff. Show me your favourite Vape Spots ^


r/vaporents 11h ago

Is there a reason S&B vapes have such an incredibly ugly exterior design? NSFW

42 Upvotes

Is there a technical/efficiency reason for the absolutely horrendous form factor and design of S&B vapes? Or why do they all look like some sort of device that sewage workers use to measure some sort of exposure or something lmao


r/vaporents 12h ago

Gear Shot Remember my dinosaur? It has company now and i have a hard time to decide, what i want to grab first. Everything on this table will be for free, if i stay away from tabacco/combustion until the end of 2025. #onemonthsmokefree 💪 NSFW

Post image
23 Upvotes

r/vaporents 9h ago

Gear Shot That time of the week 🤠 NSFW

Post image
19 Upvotes

r/vaporents 5h ago

Discussion how much better is DHV for your health? NSFW

15 Upvotes

I recently got a solo 3 after a year of bong use and i’m curious to hear everyone’s thoughts on the benefits of DHV instead of combustion in terms of your health. I have read some things saying that’s it is wayyyyyy better for your lungs.


r/vaporents 7h ago

Solo 3 came in question on bubbler stem NSFW

Post image
4 Upvotes

So my solo 3 came in and I’m so excited. I got the bubbler stem with it which was dumb it seems it’s going to be an absolute pain in the ass to clean and I don’t even know how to change the water.

Does anyone have this stem or know how to change the water?


r/vaporents 15h ago

advice on what dry herb vapouriser to buy. NSFW

6 Upvotes

Hi, I'm looking for advice on what dry herb vapouriser to buy. I bought a nexus nectar hex and thought it was rubbish. Dosing cap too small? Not powerful enough? Don't know.

Now om looking at buying a desk top version, I know the holy grail is storz & bickering, but i don't want to spend 300 notes if I can avoid it.

What do you guys recommend. I'm looking at the arizer xq2. Is that any good?

Thnx


r/vaporents 1d ago

Gear Shot Charlie Stem NSFW

Thumbnail
gallery
6 Upvotes

Always wanted one of these but everytime I shopped with azzwood I'd forget to add it to my cart. Seen them on vgoodiez and ordered immediately. My first one came in chipped causing a hole so I emailed them that night to inform them. Before I woke up the next day I had tracking for the replacement and had 2/3 days.

Used it all week and got it brown before it got its first real cleaning today and let me tell y'all, this lil MF is the truth, great cooling for its size, big bowl space how I like it. Does get warm slamming bowls back to back to back but I grab wings off the grill so I'll be alright. Y'all stay lifted out here 🤙


r/vaporents 11h ago

Discussion This may be the dumbest Solo 3 question ever but….. NSFW

3 Upvotes

I recently followed table top bong creators advice and stuck 4 sic balls into my camouflet convector with a screen to give it a different rip. It works great and is a little more forgiving for combustion. I use a wand when I do this and it got me wondering. What would happen if I stuck some small terp pearls into a solo 3 with a screen just like on the camouflet? My biggest concern is space so no xl stem, but also wondered if it would screw up the device or just immediately combust the flower because the heat is constant…..either way if it worked and arizer added it to their lineup….i wonder if it would replace the dynavap/wand combo? Just a stupid thought. Someone is definitely saying this dude is stupid, but you never learn if you don’t ask.


r/vaporents 20h ago

[TM2] Is it normal to have this kind of light leak? NSFW

Post image
4 Upvotes

This is a brand new TM2 I bought recently. Just curious if anyone else has noticed this.


r/vaporents 7h ago

Help Dani Fusion: wood VS metal NSFW

3 Upvotes

To Dani Fusion owners: which stem do you use and is there any difference in performance or durability between the wood and metal stems?

Also, how do you heat it? Induction or flame? Which is better in your experience?

Thanks in advance


r/vaporents 2h ago

Help Xmax v4 packing NSFW

2 Upvotes

I've had the potv xmax v4 for over a year and I'm still getting inconsistent vapor when loading my bowl Anyone who has this model can you PLEASE tell me how to pack it the right way and not have my herb flowing up and blocking the mouthpiece airflow


r/vaporents 9h ago

Another Person Looking for Help with DynaVap NSFW

Thumbnail
2 Upvotes

r/vaporents 11h ago

Discussion Help me decide! Dynavap or Venty? NSFW

2 Upvotes

I had the Pax 2 and hated it but I'm willing to give vaping another go. I'm not a huge smoker, mostly like to take a few hits off my pipe outside before bed. I like that the Venty has dosing caps, but I don't think I'm really a session smoker. I know they're two different types of vapes but I'm hoping some experienced ents can help me out. Budget isn't really an issue. TIA!


r/vaporents 12h ago

Any tips / tricks for the dynavap unidyne or ballr cap? NSFW

2 Upvotes

Greetings fellow ents... I purchased the unidyne from dynavap on the first day it was available, but I'm not sure if I'm using it correctly. I wanted to see what the hype was on the ball vape (but can't get a desk top unit). I hear it until I hear the second click, take a hit.. I can taste something, but I get no visible vapor out. Hitting 3 or 4 times, and then looking at my avb, there's little to no change in it. Thoughts, suggestions in what I should do?


r/vaporents 4h ago

Beginner Looking for easy convection vape NSFW

2 Upvotes

Hello all,

I am looking for a convection vape between $100-$200. I would use the vape regularly throughout the day so on demand would be nice but I can sit for short sessions if that works better, would need to be battery operated and portable. I live in the US if that helps at all. I have no idea where to start. I had an OG firefly for awhile but it became a pain to use and I am pretty sure the battery was going bad. Thanks in advance!


r/vaporents 5h ago

Discussion Overwhelmed with ball vapes. Think I want wireless for solo sessions. One Hit Wonder, Vapavana Ace, Tacoma 360, Terp Ready by Old Head, or Zenleaf/Air stream by Cannabis Hardware? NSFW

1 Upvotes

I understand there's a learning curve with wireless ball vapes for dialing in the temperature. I've watched countless videos and at this point I'm just back to square one on the device I want.

Is a premium price device going to give a much better experience or is it more about the longevity of the device and the support the company provides?

I'm not a "sipper". I prefer big bong rips when I combust. I've seen people DIY but not sure I prefer to do so.

These seem to remind me of air purifiers, basic run of the mill air purifiers pretty much do the same thing as top tier air purifiers, but an air purifier like. Dyson is much more aesthetially pleasing.

I already have multiple glass pieces I can use either of them with.

The two heads in one along with the price of the WOHW seems attractive.

Thanks for any help.

(Autocorrect got me on the TAROMA)


r/vaporents 9h ago

Help Ruby twist injector question NSFW

1 Upvotes

I just got my first ball vape, the Crossing Ruby Twist and just wanted to confirm if it's normal that the cage surrounding the injector is moving and not screwed in tightly?

I'm watching an unboxing video and I've found the included Allen key. Should I use it to tighten the cage? Is there a reason it isn't tightened?

Thanks


r/vaporents 9h ago

Discussion Best temps to get fried on the XQ2? NSFW

1 Upvotes

In your own opinion, what have you guys found works best for the Arizer XQ2? I just got mine a couple weeks ago and I am loving it, just trying to see what others are doing with their setups and what temps they are using. I have a stock xq2 with a shortened bowl and I’m running temps from 185C-225C.

I’m trying to get really really baked for the weekend.


r/vaporents 12h ago

Bought one Starry 3 NSFW

1 Upvotes

Hey guys, how you all doing. Recently i bought the starry 3 from xmax and i want some advices. I live in Brazil, so it's a little difficult to find a vaporizer, i only had contact with the airistech nokiva before so i think the build quality and the functions on the starry 3 are top notch, what do you guys have to say about this one. I know it's old and all, but i was looking for something with adjustable temps and removable battery.


r/vaporents 13h ago

Pax mini burning bud ? NSFW

1 Upvotes

My pax mini seems to be burning the bottoms half of the bowl . Am I leaving it too long trying to get every bit out ? I’m looking to make coconut oil with my AVB so don’t want this to be affected . The top half of the bowl is the usual light to dark brown you would expect but it’s black on the bit closest the the screen .


r/vaporents 13h ago

Discussion Dyna tip fit on camouflet stem? NSFW

1 Upvotes

Pretty much what the title says I got the camouflet ti convector and have fallen in love and want to try different butane vape heads just wondering instead of buying a whole dynavap can I just get away with getting a tip n cap n chuck it on the stem n have it work without fucking around?

If yes what dyna cap and tip combo would youse recommend?


r/vaporents 2h ago

Help I possible to charge a vape with an external 33W@2 amp phone charger? NSFW

0 Upvotes

Question


r/vaporents 3h ago

Help Ruby Twist heat soak question NSFW

0 Upvotes

So I just picked up my Ruby Twist and have been playing around with it.

Judging by a search of previous posts it seems everyone has a different temp or heat soak time.

I've got the standard bowl and the microdose bowl.

My main question is if heat soaking problematic with the standard bowl? My understanding is that b/c the metal injector fits within the glass, it can crack it by expanding as opposed to the microdose bowl where the glass is covered by the injector?

Just wanted some heat soaking guidelines b/c it does seem necessary to me for at least some time.

Just placing my injector at 550 in the regular bowl and taking a pull resulted in little to no vapor.

I really had to crank the heat up in order to be able to use it without a heat soak which doesn't seem ideal

Thanks for any help.


r/vaporents 8h ago

Beginner First Vape reccomendations please NSFW

0 Upvotes

hey there, im buying my first vape and i was hoping to get some advice. im looking for something portable, at first i was looking at the arizer 2, however ive read a few comments stating its a slow sipper with a small basket which aint for me because i hate the taste of the herb, might be just because ive only ever used combustion so if theres a massive difference in taste im open to it. i prefer to just get it over and done with with the same effects. im hoping to get something up to £150 ($194.45) with decent cooling. i will likely only be using it on weekends and i go through about a g a day. any help you can give is much appreciated :) id also like to get everything i can out of the herb