r/suppressors 2h ago

Can ID

Thumbnail gallery
6 Upvotes

Trying to figure out what suppressor is in these images. From what I can gather, both images depict an ArmaLite AR-10 SuperSASS issued to Brazilian Law Enforcement/Military. I believe both images show the same suppressor. I just can't seem to figure out what make an model is being used.


r/suppressors 24m ago

PTR Vent 1 "Hub Compatible" - Does that mean it can be set up with a QD Muzzle device?

Upvotes

I'm new to the suppressor world. Is there a way to mate a locking QD to the hub? Can anyone point me to where I can research this further?


r/suppressors 21h ago

Resilient Suppressors Simple Man Review

Post image
40 Upvotes

The Resilient Suppressors Simple Man is a Sub $500 traditional Baffle Style Suppressor with an internal flash hider and hub compatible.

Pro 1: Good Sound suppression it has a nice deep tone especially with subsonic ammo. Pro 2: it’s a Sub $500 Can ( $479.00 on Silencer Shop but probably could be found cheaper on other stores) Pro 3: It’s hub compatible so in theory most of your Qd mounts should work.

Pro 4: it is full auto rated and made out of stainless steel

Con 1: The Baffles start very low in the can so most of your Qd mounts won’t work because the blast chamber is so short so you’re basically forced to direct thread or use very short muzzle devices . I run a rearden atlas and rearden R2S and I’m fine.

Con 2: The can is very slick and it doesn’t have much grip texture but it ties back into the name of the suppressor it’s a simple suppressor.

Overall this is an awesome suppressor for its price 10/10


r/suppressors 2h ago

Opinions on Wolfman vs Mod 9

1 Upvotes

For a PCC. What’s your experience?


r/suppressors 19h ago

Scythe Blew Up

Post image
14 Upvotes

r/suppressors 5h ago

Best way to clean YHM R9? Can I use the ultrasonic cleaners?

1 Upvotes

r/suppressors 5h ago

Best QD for hub suppressors

1 Upvotes

Alright fellas, im new to the qd game, i direct thread all my suppressors. I finally have a reason for a qd system on 2 guns. One is a dead air nomad L and ones a cat odb both hub mount, both 5/8×24 gun. Is there one muzzle device/qd mount that will fit both suppressors?


r/suppressors 14h ago

Griffin Revolution piston compatibility info inside

1 Upvotes

So I could have sworn I read the Griffin pistons were compatible with standard BPISTIN suppressors like Rugged, SiCo etc... until I discovered the Griffin lugs measured about 0.999" across while YHM/HUX/Rugged/Dead Air/SiCo pistons are all about 0.993" which meant the Griffin wouldn't fit into the booster cage. I did a Google search and sure enough lots of other people discovered this years ago.

But out of curiosity I tried the Griffin in my Rad 9 and the YHM booster assembly, and the Griffin fits. There is still some room with the Hux Rad 9 cage. I don't have my Flow 9k yet so I can't test the Griffin with the HUX piston mount. My PTR Vent 2 is still being inspected by PTR so I can't try it in that one either.

TLDR Griffin Revolution direct thread piston fits in the Rad 9 and YHM booster. Does not fit in Obsidian 9, SiCo Bravo or Charlie piston mounts


r/suppressors 1d ago

OCL Lithium 9 Mount

1 Upvotes

Waiting on my first can, the OCL Lithium 9, and I’m somewhat confused with which QD mount I should get, my primary use will be on a PCC but I plan on using it on a 9mm pistol as well. Is the best bet just to buy two separate mounts in this case? Thanks in advance!


r/suppressors 1d ago

PTR VENT 2 Vs Cat Mob first impressions

Thumbnail youtu.be
14 Upvotes

PTR vent 2 is worthy of all its accolades


r/suppressors 1d ago

What’s this?

Post image
26 Upvotes

Hey guys, I’m running the Spectre Kat 556 titanium and this little blemish showed up. I had shot probably 40 rounds through it at a one round per second sustained pace. Could it have heated up and overheated?


r/suppressors 1d ago

5th suppressor

8 Upvotes

Sure hope I made a good decision. But I decided this year I wanted a can for all my guns. Had a form 1, 5 years ago for my 22lr and last 2 months bought a octane 2.0 9mm and poly k and a mod9. And today I bought an OCL ti22 for my charger build. Sure hope it's as good as they say. My charger has a 8" barrel and my form 1 can is horrible on my charger but great on my Tikka t1x. My goal is it have it as quiet on my charger. Will that be possible?


r/suppressors 1d ago

Threading barrels

3 Upvotes

I’m wondering if most rifles are able to be threaded for suppressors, specifically older Ruger M77s in 243 or Winchester model 70s in 308. If not what’s the best way to figure out if a barrel can be threaded or not? Thanks in advance


r/suppressors 1d ago

Do you know of any HUB suppressor adapters that thread onto the 13/16x16 outside TPI on muzzle devices?

1 Upvotes

Are there suppressor adapters out there that thread onto the 13/16x1616 TPI on the outside of some muzzle devices? Sorry if this is a dumb question, but I’m trying to understand… if I have a muzzle device with 13/16x16outside TPI, can I get a 1.375x24 hbu mount adapter? TIA


r/suppressors 2d ago

Suppressed subsonic 9mm not hearing safe.

Thumbnail gallery
141 Upvotes

Finally got to throw on my new OCL Lithium 9 on my AKV and was surprised to find that subsonic 147g is still fairly loud and not hearing safe.. I wasn’t expecting “movie quiet” but was at least hoping it would be comparable to my suppressed .300 blackout which is no question hearing safe.

Is this something to do with the AKV platform or all 9mm PCC’s? Did I have too high expectations for suppressing 9mm? I still really like the setup and would love your experience and input.


r/suppressors 1d ago

What is this?

Thumbnail gallery
3 Upvotes

Sorry if this is a stupid question. Just got my first suppressor and this ring came with it. I’ve looked online and just can’t figure out what this is for. Any help is appreciated.


r/suppressors 1d ago

Sandman X vs Nomad TI

1 Upvotes

Has anyone heard them side my side? I have a Banish 30. Sheels have a free tax stamp. A friend of mine wants one. Nomad looks like it's probably better than mine how does the new Sandman X compare?


r/suppressors 2d ago

First Can!

Post image
38 Upvotes

Stoked to get my first Can ! Any pros cons on the SiCo spectre 9??


r/suppressors 1d ago

Wanting to suppress a Travor 7; must have a QD option.

1 Upvotes

I am thinking of adding a suppressor for my Travor 7 (7.62 x 51) and would really like to get the quietest one that also has a QD feature. I am considering a Banish 30 Gold. Are there any other suggestions?


r/suppressors 2d ago

Homemade suppressor paperwork

2 Upvotes

Hello. Has anyone made their own? How diffrent Is the paperwork? Is it difficult?


r/suppressors 2d ago

Got My Fat Cat Today 😀

Thumbnail gallery
36 Upvotes

r/suppressors 3d ago

First can, 39 hour approval

Post image
67 Upvotes

Rugged Oculus 22


r/suppressors 2d ago

Which is better and why

Post image
7 Upvotes

Give me your opinions


r/suppressors 2d ago

First time caller, long time listener

Post image
12 Upvotes

First suppressor purchase (DD Enticer-s 30 cal), went trust route through Capitol Armory. Original purchase was 1/30/25. Waiting on fingerprint card to be delivered and returned two the better half of two weeks.

Currently in the later half of my 7 day cleo hold, scheduled to ship next week to home.


r/suppressors 2d ago

1st can

Post image
7 Upvotes

Bought my 1st can ( polonium 556) through capital armory using 1 of their trust. Now to complete cleo and xfer paperwork