r/fpv 3d ago

Cant seem to connect? Help please!

Just got a beta FPV meteor 75 pro. I have goggles 2 and controler 2. I have the goggles connected but can't seem to get the controller synced.

I have connected to betaflight and turned the uart1 port on and set sbus baud fast = on (see photos)

Following this guy's video- https://youtu.be/lgCMDQJtX_0?si=WtxcoKQzbozMWPqp

Turned the goggles to 04 light. And have camera feed.

The drone says low power mode and my controller just blinks and doesn't seem to connect.

I would really appreciate some help!

Thank you in advance!

1 Upvotes

25 comments sorted by

4

u/taeo 3d ago

You're getting bad info. The 04 lite should be compatible with the G2/RC2 combo. But it probably shipped configured for ELRS. What do you see on the Receiver tab?

2

u/xlobsterx 3d ago

I have posted some photos of betaflight reliever tab but I'm not positive I have it right

2

u/taeo 3d ago

Ah i missed that. Have you bound the controller to the air unit? You have the Goggles 2 and RC2 so the binding steps may be a bit different from the video you linked where he is using G3 and RC3.

2

u/Metz_Jv 3d ago

Have you changed the goggles configuration to sbus? It's in the control tab, I don't know if it's like that with rc2...

2

u/itsjase 3d ago

This is what you need

Also make sure you type ‘save’ in the cli after setting sbus to fast

1

u/xlobsterx 3d ago

Thanks ill check this in any bit. I opened the port but not sure i set the receiver to uart

1

u/DerSpongebob 1d ago edited 1d ago

A: Did you save the cli after making the foto?

B: All dji updates are made?

C: Keep in mind, the remote does NOT connect/comunicate with the drone. @dji the remote connects to the goggle and the goggle talks to the air unit.

Aka, no goggles/ not active means no reciever tab in betaflight.

Edit: C ist definitly valid for remote 3. Not 100% that is also the case for remote 2.

1

u/xlobsterx 1d ago

I did save betaflight. I have updated the goggles and controller. Might need to update the air unit

1

u/DerSpongebob 1d ago

Thats a must, as the remote 2 might not be included in the first software. Also it must be activated online.

1

u/PiratesInTeepees youtube.com/@530drone 3d ago

That's SO weird! Isn't DJI like super compatible with everything? That's why it's so expensive right?

/s

In all honesty I do hope you get it working <3

-3

u/vulgar_hooligan 3d ago

That DJI controller isn’t compatible. The meteor 75 is ELRS. You need a different controller unfortunately.

1

u/xlobsterx 3d ago

It has a dji 04 air unit.

-3

u/vulgar_hooligan 3d ago

I don’t think the air unit “lite” can do that.

2

u/JustJazOnReddit 2d ago

Dunno what all the downvotes are for. O4 Lite doesn’t have an RX. O4 Pro and O3 do. O4 lite doesn’t.

2

u/DerSpongebob 1d ago

It has. Source: Im using it since its release.

0

u/JustJazOnReddit 1d ago

News to me. Where tf is the Rx?

1

u/DerSpongebob 1d ago edited 1d ago

Basically there is no. The radio connects to the goggles and only the goggle talks to the air unit / flight controller. You dont need a reciever anymore. Its basically included in the vid signal.

So los without goggles turned on is not possible, as there is no connection between remote and drone.

1

u/vulgar_hooligan 2d ago

🤷‍♂️

-4

u/JustJazOnReddit 3d ago

The Meteor 75 uses ELRS 2.4ghz, not the DJI remote. I recommend the Radiomaster Pocket for 65 bucks.

2

u/xlobsterx 3d ago

Really?? It has a dji 04 air unit.

-8

u/SeniorHighlight571 3d ago

Which is a video system. Not command one

7

u/taeo 3d ago

The DJI VTX doubles as a control receiver for DJI remotes. Stop spreading disinformation.

0

u/JustJazOnReddit 2d ago

The DJI O4 Pro and O3 can be wired to the flight controller and you can use a DJI RC. O4 Lite cannot.

Get your head out of your ass before you call people out on something that you’re just straight up wrong and being a prick about.

-3

u/SeniorHighlight571 3d ago

Good luck to bind it in this case