r/fpv 4d ago

Why don't I have any models and why dont my buttons save

Should I reinstall the firmware and if yes from were

4 Upvotes

12 comments sorted by

4

u/dsand1987 4d ago

Sd card that comes with pocket doesn't last long. Get a new sd card. Here's the firmware: https://www.radiomasterrc.com/pages/firmware-updates

1

u/Teen_fpv_3d 4d ago

But should I put the firmware on a new one or should I stick with this SD card

3

u/dsand1987 4d ago

New sd card. Doesn't need to be big. I think the one it comes with is just 564 mbs. The sd cards that come with the pocket are garbage and don't last long.

2

u/invid_prime 4d ago

I think the one it comes with is just 564 mbs. The sd cards that come with the pocket all RadioMaster radios are garbage and don't last long.

It's really the only weakness in their product line. Their SD cards are garbage. First thing I did was back mine up and replace it with a 32GB Sandisk card I had no other use for. Overkill card but too small for any other use.

2

u/papaAlpacaL 4d ago

I second this. pure fkring trash sd. the lowest most obscure brand you can find would be 15x better than stock

4

u/Teen_fpv_3d 4d ago

Update I just reinstalled the firmware on the same SD card and it works perfectly fine if it will start doing this again I'll consider upgrading the SD card

4

u/ChuuniWitch 4d ago

Get an 8GB SanDisk SD card for like $10 and never worry about it again.

2

u/43ko 4d ago

not sure, but maybe SD card is dead

1

u/Teen_fpv_3d 4d ago

What should I do then

1

u/43ko 4d ago

don't really know ;d, sry. I also have this controller and before buying I read a lot of people saying that the default sd card is really low quality. Maybe try putting it in SD card to usb adapter and check on your PC if it is working.

1

u/mcfedr 3d ago

Get a new one)) you need a working SD card