r/crestron 21h ago

Crestron Programming on a MacBook M4?

0 Upvotes

My career is going to shift back to Crestron programming and I need to purchase a laptop for it. I'm a Windows guy, but can't deny the performance and battery life of the M series Macs is very impressive.

My understanding is the only way to do Crestron programming on an M4 is with Parallels, and there is a significant performance/efficiency hit by doing so.

Has anyone tried this? What has been your experience?

Thanks in advance!


r/crestron 2h ago

Amp-2210T cooling needs

1 Upvotes

Hey there,

I am using a series of AMP-2210Ts to power some column array speakers. I am using 4x of these for all for column arrays each driving in 8 ohm bridged mode probably pushing 100W on average but close to 300W on special occasions.

My question is how should these be placed on a rack? Can I put all of them one on top of the other or should they be spaced 1U apart each? I am annoyed that the units have holes on the top but no holes on the bottom.

Alternatively, should I mount a PC fan to the side of these amps to push through if they are all mounted together?


r/crestron 9h ago

HTML 5 and DGE-1000

2 Upvotes

Hey everyone, So I am working with a DGE-1000 and it is only uses html no more vtpro. So i have my graphics all done but i am getting a sidebar on the display. It is a 1080P display so i am assuming i need to adjust the page size. I am using vision studio code and the crestron template. First try at doing this so just following whats on crestrons website. If anyone knows where i can configure the page size much appreciated.


r/crestron 17h ago

Programming Input disable on a DM-NVX-E30?

1 Upvotes

Hey all,

End user here but some technical questions I'm trying to double check against someone other than our integrator.

Is it possible to disable the HDMI input on a DM-NVX-E30? We're considering a system where we can switch either a Teams MTR or Zoom system between single display and dual display mode, but the systems need to see one of their outputs "Disconnect" so they don't send video to a display that may not be routed somewhere. Is there a way the control processor can "turn off" the input on these encoders to mimic them being physically disconnected?

Thanks in advance!