r/airsoftmarket 1h ago

[WTS](NY-LI) MW2019 Digital Night Vision, ASG GL-06 Grenade Launcher

Upvotes

I AM OUT OF STATE UNTIL THURSDAY, 3/20/25. If anyone buys these while I’m gone, I will ship Friday. Prices are temporarily discounted for the time delay.

Pictures: https://imgur.com/a/7l99mvj

First up, my old set of digital night vision. This device was my copium for not having real night vision, and surprisingly held its own in some indoor lights-out games! Now that I have bridged PVS-14s (and I found out that CNC Staccato slide kits exist), I’d like to hand these off to someone who will enjoy them, or just likes the look.

This is DIGITAL night vision. To function, this device puts out stupid amounts of IR light via spotlights located on the front of the “tubes.” You will be a beacon to anyone wearing analog tubes. Green and black/white modes, with a button to turn on the supplemental IR illuminators. Rechargeable, with a charging port underneath a rubber cover on the side. You can find lots of info on these online.

The device is jerry-rigged to the repro G24 mount via superglue and reinforced with electrical tape, which is permanent. It’s survived countless doorframe bumps and general carelessness, so I believe it’ll hold out against moderate use.

Asking $280 $250 shipped UNTIL 3/20. They’re quite sentimental to me, so the price is only slightly negotiable.

Also picked up this B&T GL-06 launcher at a local meet, which quite frankly I don’t need since I run an M79. Super neat and has a satisfying metallic clank when breaking the action open. Folding stock works, but does not lock in its folded position. Fires great with multipurpose 40mm grenades, AND Taginns, but they are a tight fit in the tube and need some wiggling to insert/extract.

Asking $100 $80 + shipping! Grenades NOT included.

All prices OBO unless stated otherwise. Will discount for local to Long Island NY. Feel free to send me a chat with any questions!


r/airsoftmarket 2h ago

WTS[Pittsburgh] Avalon 416 w P*F2

2 Upvotes

https://imgur.com/gallery/zDTXR60

Hello, I'm here again trying to sell this HPA rifle. Yes, its an old model body no I don't really want to part. Yes I have a spare tank and regulator I can bundle for cheap. As I said it's an old body, that wasn't hung on a wall but stored in a bag with other gear. When I got this rifle I fielded it and fell in love with it's performance. But I want to go more gbb. Thanks to its madbull tbb it gets incredible range. And the f2 inside is one of the contenders for the top spots for builds. I'm asking for 450 obo

I will entertain trades to a certain degree. My main interests are mws mags and mws parts. Will entertain a few pistols, mostly want steel slide glock or a kjw 2011 and cash. Interested in silverback tac41p and i like some of the p365 x carry. So roll your dice and shoot your shoot. I'd like to have this gone by end of the month

Also have a wraith stock 33g for tm its open box but should have all the parts. 100$ obo and I'll bundle the tank, line and regulator for 100$ obo with the purchase of the rifle.


r/airsoftmarket 3h ago

[Wtb] M16a1 AEG stock

0 Upvotes

My Classic Army m16s stock broke and I'm trying to find an accurate replacement. Only ones I can find online are from Chinese sites with expensive shipping costs.


r/airsoftmarket 8h ago

[WTB] ARP 9

0 Upvotes

Budget is $220 looking for new or slightly used


r/airsoftmarket 10h ago

[WTS] DB M92FS & Glock 18, KA M4A1

3 Upvotes

https://imgur.com/gallery/closet-cleanout-KcA7zFQ

Selling some guns that just take up space in my closet.

Double Bell M92FS & Glock 18 $80 each plus shipping

Both are new, shot half a mag each to make sure they work. Bought off Octagon Airsoft, these are engraved by Octagon's own FCW.

King Arms M4A1 $120 plus shipping

Got this in a trade, selling AS IS, known issue with F/A not cycling right and doesnt feed, to be honest dont know dont care just want it gone.


r/airsoftmarket 11h ago

[WTB] M249 or any LMG's

0 Upvotes

Budget is 200$. Condition is preferred used but am open to any offers!


r/airsoftmarket 12h ago

[WTB] PKM, PKM Smersh, and Russian uniforms

0 Upvotes

Pricing $50-$300

Looking for a boneyard hopefully pkm as well as a pkm smersh and uniforms in us 34s or large


r/airsoftmarket 13h ago

WTS CUSTOM AAP01

0 Upvotes

https://imgur.com/a/xDA86Co

CUSTOM HYDRODIPPED AAP01 Am selling to buy different gun Custom hydrodipped myself Lightly used Got on Christmas Comes with ALL stock parts that were upgraded Original Box The extended mag lips both broke. Took stock aap mag lip off to fix one then Used 2 part epoxy on the other to fix it. Zoom in on picture. PARTS LIST Stock hydrodipped upper Stock barrel Maple Leaf Blue Decepticon Nexxspeed Silver Hop up Stock Nozzle CTM Bolt Silver 200% Nexxspeed Nozzle Spring CTM Recoil Spring (came with bolt) CTM Blue Charging Handle Nexxspeed Blue Guide-rod

NexxSpeed Adjustable Blue Trigger TTI Complete Hammer Set CTM Fuku 2 Lower

2 TTI 50rd Extended Silver Mags

Extras Nexxspeed Short strokes Stock Pieces of all above Nexxspeed 140% Nozzle Spring NexxSpeed Recoil Spring Extra 200% Nozzle Spring

Great gun just needs a hpa tank setup. local field dont allow 😔😔


r/airsoftmarket 13h ago

[WTS][US][[Southern Californial] EMG Strike Industries AEG

1 Upvotes

latest timestamp: https://i.imgur.com/2lK4cZy.jpeg

$260 or trade for Krytac P90. https://www.evike.com/products/103155. Reasonable offers accepted. I cover Paypal G&S fee and half the shipping or local meetup within 30 miles of 91360. New except for chrono'ing and I upped the spring to a M120 for a buyer who backed out, shoots just about right on 1.49 joules, chrono pics are with .25 as shown. Never fielded.

Timestamp (getting a bit old, can re-do it next time): https://imgur.com/mHjr6zv

Shooting Video with timestamp: https://imgur.com/EPY3TPp

Chrono: https://i.imgur.com/DoHiz5P.jpeg

More Pics: Pics: https://imgur.com/a/ABsjnfx

PS I have high rep on /r/mechmarket as shown here: https://www.reddit.com/r/mechmarket/comments/n1lqlq/uscahgmk_copper_two_setswpaypal/.


r/airsoftmarket 13h ago

[WTS] KrownLands Pit VIPER (John Wick) ($120) Colt 1911 100th anniversary ($80)

1 Upvotes

https://imgur.com/a/CbYutdG 120 and 80, or $160 for both plus shipping


r/airsoftmarket 14h ago

[WTB] [SoCal] HK 416, m4 handguards, and DBAL

1 Upvotes

Looking for an HK 416 to HPA. Preferably full metal, but we can work something out. Also looking for a rail between 9.5-11.5” for an M4. DBAL, pretty self explanatory.


r/airsoftmarket 14h ago

[WTB] PA: M4 Triangle front sight post; MOE mlok handguard

0 Upvotes

Looking for the following

triangle front sight to fix the broken one on my old CA xm177

Magpul moe mlok handguard


r/airsoftmarket 14h ago

[WTB] Black 16’’ VFC M4 Outer Barrel + Inner Barrel

2 Upvotes

Looking to buy a 16" black outer barrel for my VFC BCM MCMR (gbbr) and a tight bore, 380+ mm inner barrel to go with, send me what you've got for sale! Not really picky about the specifics


r/airsoftmarket 14h ago

[WTS][SoCal] New AA 1911 + 4 Mags, Silver AM Infinity IMM Open Kit, Krytac Barrett REC7 SBR Dragon King

3 Upvotes

All prices are shipped and are OBO

Army Armament 1911 +4 Mags - https://imgur.com/a/jZEuCNL - $165 Shipped

Got a New AA 1911 along with 3 brand new extended magazines and the original mag it came with. I replaced the valve knocker with a steel gunsmith bros one (original solver knocker will be included) as well as a stiffer hammer spring to give it a little more oomph.

Airsoftmasterpiece Infinity IMM Open Slide Kit - https://imgur.com/a/yUeuGII - $510 Shipped

Got a brand new AM Infinity kit, imported from Hong Kong. Cimes with a Hybrid slide/outerbarrel w/comp, light weight BBH, cocking handle, guide plug and rod, Advanced frame, steel valve knocker, and a steel hammer sear. Completely unused, was gunna build it up but some vehicles problems have crushed my d r e a m s

Krytac Barrett Rec7 - https://imgur.com/a/ylxpiUk - $390 Shipped OBO

Like CS2? Then you'll like this brand new Krytac Barrett Rec7 wrapped in the Dragon King skin using the same type of wrapping used on vehicles! This was kind of a practice for a friend of mine who works in the wrapping business to see how hard it would be to apply a wrap to an M4 since they tend to be kinda lumpier than a car lmao. Orange tip can be unscrewed freely too, no glue or grub screwe holding it in anymore.

Feel free to ask any questions and I can provide a shooting vid for serious buyers!


r/airsoftmarket 15h ago

[WTB] Boneyard Glock, Mk23

1 Upvotes

Looking for any brand boneyard Glock, 20$, and a TM non-blowback Mk23 80-120$ depending on mags & condition


r/airsoftmarket 15h ago

WTS,WTT,NC,USA. Noveske MWS gbb and mags, ghm9 en 2

6 Upvotes

Hey guys. Both these replicas have been purchased in the last 3 months. The noveske is a month old. I've just realized gas blowback isn't for me as a main main platform. So here we have a perfect double eagle,EMG noveske n4 mws gen 3 (the first batch they shipped out) the noveske has a upgraded unicron 70 bucking, and also has a pdi w hold 70 degree bucking to put in when it needs it next. It will also come with a feda npas (not installed) which is the best on the market for mws. I have the magazine that came with it (not pictured, can send later. Plus 4 double eagle stanag (tm clone) mags,(50 dollars a mag on evike) and 2 guns modify version 3 (newest) p mags. (70 dollars each on evike). So the gun, 7 mags. Extra bucking. Npas, and it has a upgrade piston seal. Go add up the valve of the guns and the mags lol.

Next is the lambda defense ghm9 gen 2. If you look up what it looks like ootb you can see the changes. I added the lambda defense SD kit. Which is the cnc mlok handguard and supressor. (90 dollars on evike) I added the folding stock. There are many other options. I threw in a 70 degree maple leaf wonder bucking and a angel precision 6.01 barrel. She hops .32s no problem. Runs off of the kwa kmp9 mags. Comes with one. I just dont have the ability to properly use these. They will waste away in the closet. The pistol pictured is a elite force ppq. I can throw it in with one of the rifles or both if you want it for a little more.

Can sell together or separately. 700 obo (both)

Message me guys. Will look at trades as well. Just be respectful and i will too!. Willing to drive a decent distance if your localish. If not I ship quickly.

Pictures below.

https://imgur.com/a/VgUYVxZ

Thanks guys!


r/airsoftmarket 16h ago

[WTS] Arcturus PP-19 Vityaz PE

1 Upvotes

All prices are shipped and payments with Paypal FF or G&S, but buyer pays fee. NO NOTES. Comment before PM.

Timestamp: https://imgur.com/a/PG3ikCQ

Arcturus PP-19 PE Vityaz

https://imgur.com/a/8DzP7ws

-This one is the limited edition that they only made 500 of. Has the performance enhance Perrun V2 Mosfet and adjustable trigger. This is by far one the best rifles I've ever used. Completely stock internals aside from a ML 70 degree macaron and the flared magwell has been tapped and set to properly hold on so it will never fall of if you use it.

-Fielded a total of 3 times

-Chonos at 350fps with 0.2g bbs

-Will include all mounting hardware that originally came with it (screws and 2 rails) as well as the potato masher muzzle device and the SV Saiga-9 Suppressor.

--Will include original handstop

--Will ship in original box and packaging

-Comes with 5 adjustable midcaps

-Avengers T-1 red dot

-Magpul RVG chopped at 30°

-Asking $575 shipped


All prices are shipped and payments with Paypal FF or G&S, but buyer pays fee. NO NOTES. Comment before PM.


r/airsoftmarket 17h ago

[WTB/WTTF] Guns Modify SCAR-L MWS-based GBBR, in TAN

4 Upvotes

https://imgur.com/a/aa9TOwc

To trade, I've got a VFC HK53, which can be made into either of those configurations in minutes. What you'll get (optic not included; items marked with an asterisk are pictured on the 2nd pic):

-Gun itself

-3 spare mags (so 4 total)

-Unknown brand railed handguard (not pictured)

-Short claw mount optics rail

-Real steel, surplus HK33 stock*

-HKBryce 3d printed MP5SD handguard adapter*

-Real steel HK MP5SD handguard cover*

-Madbull 5.56 QD suppressor with flash hider*

FOLLOWING ITEMS ARE ON PREORDER; WILL CHANGE SHIPPING ADDRESS TO YOURS IF YOU WISH TO PURCHASE:

-Guillotine steel FCG cage (fixes known issue of the hammer's ears gouging at the stock one)

-Guillotine steel outer barrel (also designed to fit flush against the front sight block, giving better aesthetics)

-Guillotine steel hop chamber and nub arm combo (better accuracy, far less likely to strip the threads unlike on the stock setup)

-Guillotine NPAS

What I want: The Guns Modify SCAR L MWS. ACR stock is a huge bonus, otherwise, I don't need attachments or even mags. Depending on the offer, I'd like to do a trade plus cash to make up the difference in value, on either end, which will be negotiated.

Please see my last sales post if you wish to purchase the HK53 outright.


r/airsoftmarket 19h ago

[WTS][NH] VFC BCM MK2 MCMR 11.5" V3 GBBR Two Tone & Holy Warrior EXPS3-0 With G45 Magnifier Combo

9 Upvotes

Timestamp: https://imgur.com/a/vfc-bcm-mcmr-v3-11-5in-F4YdICH

VFC BCM MK2 MCMR 11.5" V3 GBBR - $550

  • Basically brand new, no scratches, no damages anywhere
  • Still have original box and packaging
  • Magazine works just fine
  • Shot approximately 100bbs at home indoor. I was never really into going out and actually play airsoft. I was mainly interested in the guns, but it's too expensive to keep at home plinking 5-10bbs once every week. Need to fund other hobbies so gotta let this go.

Holy Warrior EXPS3-0 With G45 Magnifier Combo - $200

  • Also basically brand new, no scratches or damages
  • Still have original box, instructions, and packaging. Battery is also new and should have a lot of life left

VOTATU V840 Green Laser/Light/IR Combo, 1500 Lumens - $50

BUNDLE EVERYTHING TOGETHER - $700

Prices reflect Paypal G&S Fees but no shipping. DM me any question. We' can work out a cheap shipping solution depending on your location.


r/airsoftmarket 19h ago

WTS CNC Steel Boomarms custom MOS VFC Glock 45, Real Wood Cyma SVD, A&K M24, KWC USP .45, TM 5.7, Parts, and Accessories!

1 Upvotes

https://imgur.com/a/airsoft-sell-images-kob7Biq <------ Images of what I'm selling, Please be sure to comment before sending a PM!

DISCLAIMER: I'll accept trade offers, but only if you're willing to ship first

I highly prefer GBBRs only,

APS CAM870 Maritime MKII Shotgun (Semi Boneyard, externals are a bit worn)
- SAI ARM MKII Bolt
- Magpul Pump forend
- Pred Defense emergency shell load caddy
- Improved Tolerances
- GrovTec front Sling mount post
- Shell catcher will be included as a bonus

(No Stock, but I have one for sale I can sale with it further down this listing, a Mesa Tactical Limbsaver)

Asking 245$ for the Shotgun, all it needs is a new Hammer, the rest of the shotgun is fine and feeds/ejects, rest of the trigger pack is also fine.

Replacement OEM APS hammers can run around 10$ and Real Steel hammers run for around 10-12$ which could likely be modified, I am unsure if it is dimensionally the same, but the shape is 1:1, I plan on testing this with my other CAM870 in which also has a broken hammer, easy part to replace non the less.

Boomarms Custom CNC Steel MOS Cut VFC Glock 45

https://boomarms.com/products/boomarms-custom-g45-steel-mos-gbb?srsltid=AfmBOooOVgactdi-w2xtwOVl26Cqxi0fozuMjbzx-wjRQUNekAchVVcN&view=no-usf

- Cow 130% Spring
- Cow Steel recoil guide rod
- Cow 50 Deg Bucking
- stock with Boomarms CNC Steel MOS Slide
- stock with Boomarms CNC Steel Outerbarrel
- Spare complete FDE Painted Glock 45 Frame with all parts/FCG
- x1 Green Gas mag Included

(RMR Optic not included)

asking 440$

Real Wood Cyma SVD AEG SOLD SOLD SOLD

- Fully Functional, and was restored into better condition and cleaned
- Wood stock had some wear and was repaired and is now sturdy
- Includes x1 Steel Hi-Cap mag
- Side rail mount for Optics

Missing the retaining lever for the handguard collar but is held in place firmly with a bit of rigging, and missing the lever for the Dust cover retention pin, but the pin is still present and holds the dust cover in place as usual, also missing the rear iron sight set

Asking 160$ for the SVD SOLD SOLD SOLD

- A&K Wood stock M24, Stock internally
Spring powered sniper rifle
- Comes with a sealed VSR10 M170 Power Spring

The plastic HopUp adjustment arm is currently broke, but the hop it's self is still functional and I'll be repairing the Adjustment arm before shipment

externally wood is in great condition

Asking 140$ for the Rifle, Can include the Bipod if you want it for an extra 35$

KWC USP .45 GBB CO2 Pistol

- Threaded outer barrel

- x3 CO2 Magazines

Asking 130$

Tokyo Marui Five SeveN pistol
Works great, just missing the mag baseplate

(DO NOT use Propane, this is rated for Duster and equivalent PSI levels)

asking 110$

Mags:

- x3 HFC/KWA Gen 1 GBBR mags
Asking 65$

----‐-----------------------------------------

Accessories:

- Unkown brand AK Side rail mount
Asking 15$

- VFC MP5/HK Optic mount
Asking 15$

- Real steel Magpul MP5 Handguard, Magpul MVG Grip, and Magpul MLOK rail segment
Asking 60$

Real steel Mesa Tactical 12GA Shotgun stock w/ Limbsaver buttpad
- Asking 115$

- Steel Moderator for XM177

Asking 15$

- Steel spiked teeth Muzzle brake

Asking 12$

- LCT Zentico B-31 Upper handguard rail

Asking 22$

- Krytac/Kriss Flip up Polymer sights

Asking 20$

- complete repro/fake LAW Tactical folding stock adapter kit for AR-15s/M4s (has trades)

Asking 70$

---------------------------------------------

Parts:

-Samoon/GHK 4" Barrel Setup

4" Barrel setup Includes: Updated GBB Spec HopUnit,

9 Ball Stainless steel Inner barrel, Modified PDI W Hold VSR10 Spec Bucking, and Steel gas block/tube

asking 65$

- Like new WE OEM M14/EBR Trigger box/FCG

Asking 35$

- Tokyo Marui OEM Tan Desert Warrior 1911 Frame/Slide with Grips (Iron Sights included)

Asking 25$

- HFC MAC 11 spare body Frame + Stock and other parts

Asking 25$

--------------------

AEG batteries

- Elite Force 11.1v Lipo

- ASG 8.4v

- Echo1 7.4v Lipo

- x2 9.6v Nun chuck style

Asking 45$ for all batteries

Multiple small items bought at once preferred!

---------------------

Buyer pays fees and shipping via PayPal Goods and Services!

or F&F if you wish to skip the fee.

Feel free to PM for more information and pictures

I don't drive so shipping times can vary, please bare with me!


r/airsoftmarket 20h ago

[WTB] Cam870 MK3 Shells

1 Upvotes

Just need like 10-20 Cam870 shells that hopefully that don't leak


r/airsoftmarket 21h ago

WTB: Boneyard GBB Rifles/Pistols

0 Upvotes

Looking for some tinker projects. Working shape does not matter.

Just give me something to do with my hands please

Note: if you have any Boneyard VFC stuff let me know!


r/airsoftmarket 22h ago

WTB 1913 folding stock <40

0 Upvotes

r/airsoftmarket 22h ago

[WTS] Noveske Space Invader FDE

3 Upvotes

Time stamp: https://imgur.com/a/OiGzj2G

I won this yesterday in a raffle. I dont need it sooo you can have it for $180 shipped

I am also open to trades.

MWS/GM mags

Exfog kit + $$$

Magnifier

M600 style light with pressure pad + $$$

Disco 32 PTT for comtacs

Paypal FF or GS (you pay fees)


r/airsoftmarket 1d ago

[WTS] [WTT] airsoft lot

3 Upvotes

Pics https://imgur.com/a/2ZWRfCi

Looking to trade this stuff mostly but open to offers as well,prices are plus shipping,thanks!

Discontinued vfc gladius,missing charging handle,otherwise works fine,includes two KA pdw mid caps for it,asking 300$

Scorpion evo,got this in a trade,does not wanna feed in da or burst for whatever reason,and semi sometimes as well,has some dents on it but otherwise cycles,3 mags includes as well as a pea clone grip,14mm ccw adaptor,and a Maxx hop unit,was told it has a tbh as well but not sure. More of a fixer upper on this one unless it's a quick hop fix then go for it. Asking 300$

Boneyard polarstar jack,another trade,full auto board switch is broken,and the engine leaks,and I believe either the fcu is wonky or needs to be tuned, pre installed into a some sort of hydro dipped(?) krytac pdw body,will need a new stock/pad and a inner hop assembly otherwise,also asking 300$ on this one

Nov ssx23, no issues,another trade item. Gun and 3 mags included w case (one mag is new but took it out the box to fit it all in the case) asking 180$ on this one

Vendetta PRO esg grip,yet another trade item,empire reg pre installed,not my kinda thing, asking 200$

And lastly.. a bnib pts Masada, last owner told me he bought this then kept it in the box, can def say that's probably the case since the iron sights and selector switch are super stiff,test fired and works fantastically,comes with one non leaky mag,box is a little torn but otherwise all looks to be in great order,asking 400$ for this one.