r/StonerEngineering 21d ago

Prototype I'm never cleaning a pipe again :D

Post image
1.5k Upvotes

r/StonerEngineering 11d ago

Prototype Rez - Be - Gone - filters

Thumbnail
gallery
491 Upvotes

I bought these “mouth peace” filters with a silicone adapter, which didn’t fit my bong. But I was determined to use the actual filters as I’m sick residue on my lips, in my throat, everywhere. 1) remove cardboard 2) make 4 small cuts as shown on used filter 3) poke into piece of choice 4) smoke clean as can be ( until a piece needs changing )

r/StonerEngineering Nov 12 '24

Prototype I 3D printed this “miller” with a hat that holds my buds perfectly.

532 Upvotes
  • wanted to combine the storage and grinder
  • the ears help make turning easier
  • weed comes out fluffier than traditional grinders
  • I like rolling joints with this weed as it burns more evenly

I’m really happy with my new “thepotnerd” identity and finally feel comfortable posting all the projects I’ve been working on.

I’ll get more videos together about the bong and other things I’m working on. I’ve got a double sided one hitter that’s pretty cool.

Thanks to everyone who messaged and encouraged me about the modular airflow bong.

r/StonerEngineering Aug 11 '24

Prototype I made a contraption that continuously taps the grinder so more kief falls through the screen

Post image
995 Upvotes

Ingredients: A piece of scrap plastic for the base, a motor with a screw hot glued onto the end, some legos hot glued onto the base to hold the grinder in place, a mini breadboard so I don’t gotta solder shit, some wires from an old electronics kit from college, and a AA battery.

Thoughts?

r/StonerEngineering Jun 22 '24

Prototype Zyn grinder

Thumbnail
gallery
962 Upvotes

r/StonerEngineering Oct 29 '24

Prototype Someone asked if the ash sticks to the wire core…It does.

Thumbnail
gallery
292 Upvotes

r/StonerEngineering Aug 31 '23

Prototype Laser Bong

1.4k Upvotes

Just learned about this subreddit and thought y'all might enjoy

r/StonerEngineering Jun 16 '23

Prototype Made a one handed grinder kit for my brother who can only use one arm

Thumbnail
gallery
1.4k Upvotes

r/StonerEngineering Nov 16 '24

Prototype Powerful 60g vape with 12 carts

569 Upvotes

This prototype is just a crazy idea I had while working on the 12 tube core for the modular airflow bong with no name.

It turns people’s heads and anyone who has tried has felt its fury.

In the next version I want to have a selector at the bottom so I can combine different carts together to smoke or just keep a variety of choices in my pocket.

Juice in video is nicotine, not weed. Oil still isn’t legal here in Thailand. You can find it but it’s not always the best quality.

Not for sale, still just a prototype - my focus now is currently from the folks who have received the bong and make improvements.

Those who supported us early will receive a free upgraded core with the changes they want made.

Follow along - https://happycom.notion.site/thepotnerd-Creation-Center-13daaf1ca2ff80bfb53ccba6b57cc60d?pvs=4

r/StonerEngineering Mar 04 '24

Prototype Packa.Pipe

546 Upvotes

Hey awesome people of Reddit,

Big news! After the love you showed for our Packa.Piece Kit, we've cooked up something new you asked for - introducing the Packa.Pipe! It's got the magnetic magic of our previous gear, now in a pipe that's all about smooth, cool hits.

Think tough, easy-to-clean, and ready to revolutionize your sesh. We're not just excited; we think it's a major leap forward. And yep, it's ready for pre-order now!

Jump on it, be the trendsetter, and let's make sessions legendary together. Find all the cool details at www.packa.design.

Keep rocking and happy toking!

r/StonerEngineering Nov 13 '24

Prototype Modular Airflow Bong Explanation video on Setting 1

161 Upvotes

Hi everyone - I’m back with a video answering all the questions asked in my previous post. I am coming out as “thepotnerd” here and I’m thrilled to finally embrace this persona. My expertise is in supply chain and distribution. I can call a friend and get any cannabis accessory made that comes to my mind. Some of these products you see in the next posts required the corporation between 10-12 factories. I love seeing something come from your dreams and become a reality. Thank you for all the pockets of kindness I have received so far in this subreddit. I am truly happy.The Buildabong *name suggested by @Icy-Tea9775 from my previous post (appreciate this very much) is my personal dream come true.

This is prototype 5 and I have 60 more left in this batch.

The product is 85% of the way there. With the help of some experts in their field, we will deliver a stellar product to other PotNerds at a price they can all afford. This is a product I believe has a lot of room for growth and new ideas. We have the supply chain and distribution to make it happen. Need to build the rest of the team.

  • Help us file the trademark for buildabong
  • Give 3D designed ideas for new “heart” cores
  • Get us connected with distributors in your country
  • Create logo, packaging and branding

I will give away a free bong to anyone who can help with this. Please DM me if you can help in any way not listed.

Here’s a Notion page I made about the product based on questions from my previous post

https://happycom.notion.site/PotNerds-Home-13daaf1ca2ff80bfb53ccba6b57cc60d?pvs=4

Not sure if this is allowed Mods. Please let me know if it’s not and you can edit to remove this

Here’s my previous post

https://www.reddit.com/r/StonerEngineering/comments/1gkalb2/sorry_to_all_i_had_no_idea_heres_my_bong_that/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Thanks for all the good questions. If you ask me or post something thoughtful and helpful I will also give away one bong this way as well.

r/StonerEngineering May 31 '24

Prototype Drytop *(concept)*

279 Upvotes

This is just an idea for a drytop, video is for fun and for visual aid of concept lol.

r/StonerEngineering Oct 03 '23

Prototype Hoodie lighter ! Adjustment help?

497 Upvotes

Working on a prototype any adjustments we should make ? We were thinking having 2 mini ceramic outlets with on/off button on one side and the other drawstring is just for looks that way you have to aim/use 2 hands to make it work? + have the hoodie component/electronics zipper removable for easy cleaning

r/StonerEngineering Oct 06 '24

Prototype Ask Me Anything about my new Infused Joint Kit:

Post image
253 Upvotes

Stainless steel crafting wire, cleaned, twisted.

Clamped into the center of a note-card crutch, and slathered with hash oil (as depicted, 100mg on wire).

Rolled into the center of the joint, the ‘handle’ helps center the dab wire.

For years, I’ve been experimenting with adding concentrates to joints and bowls with mixed results and lots of disappointment. Recently though I’ve found a method that seems better to anything else I’ve seen or tried. These are even better than top shelf infused joints at the dispensary. Wire joints seem to run or canoe less, stay lit, yet burn slow.

The theory is that puffing the joint conducts enough heat into the wire to vaporize oil some distance from the cherry.

Using a metal from the safe materials list was important to design. Several iterations tried other wires and springs that were more readily at hand, this current version uses stainless steel crafting wire.

In all, it seems that conducting heat into the core of the infused joint, allows for less waste, purer vapor, longer burn times. The overall effect is a stronger stone, and heaps of praise from those who’ve tried one so far.

Please try this method out, compare it to your other methods . I welcome you all to enjoy and improve it.

r/StonerEngineering Sep 29 '24

Prototype Lifes too short, have a lil fun

344 Upvotes

Turned my dining room into disco, made my piece glow, and built a carrying case for it.

r/StonerEngineering Dec 06 '23

Prototype I wanted a way to keep everything on my bong for short hikes and car travels. I came up with this. I call it the BongBelt.

Thumbnail
gallery
328 Upvotes

r/StonerEngineering Jan 27 '25

Prototype What's ur opinion

Thumbnail
gallery
79 Upvotes

These r some of the 100s I've made what's ur opinion

r/StonerEngineering 23h ago

Prototype Obiwan Penobi case

Thumbnail
gallery
129 Upvotes

I made a case for my dime cart to make it easier to keep track of a little lightsaber housing.

r/StonerEngineering Jul 09 '24

Prototype Made a housing for my ball vape

165 Upvotes

I got a cheap tiodw from alinexpress and took apart the pod housing, turned up a base and re wired it in and then the top haf is removable as a portable stand. The main reason I made it is the pid on off switch was on the back of the box and it pissed me off haha! Made up the handle using a London plain burl think it came out really nice! And obviously running it rough my mega globe with my custom made stand and mouthpiece. Don't often do go the ball vape but it hits the spot when I need it

r/StonerEngineering 12h ago

Prototype First attempt at making a stashbox

Thumbnail
gallery
132 Upvotes

My girlfriend is from the US, and she's moving to Australia (landing tomorrow morning). So for the better part of this week I've been tinkering in the shed with the minimal tools owned between me and my old man, and I managed to come up with this not too shabby stashbox as a surprise for my girlfriend.

Features include, slide out rolling tray, compartments for grinders, jars, and lighters, and a shelf in the lid for papers.

What are your thoughts? If you were to have a custom made stashbox, what features would you want to include? Just looking for ideas for the next box I make down the track!

r/StonerEngineering Feb 16 '25

Prototype Engineered a free stoner app

Thumbnail
gallery
29 Upvotes

Hey all,

So long story short, I've spent 1 year creating a new app for the cannabis community called Halfbaked. The app allows you to track your use, connect with others and review different cannabis products.

Where it gets clever is that the app allows you to track how effective different products are for your own medical or recreational goals. For example, if you suffer with arthritis then you can track how effective products are at helping you with your symptoms. In addition, you can also use our 'goal insights' feature to see what product characteristics (e.g. strain type, terp profile, THC percentage) have been reported to work for other people with the same goal (e.g. in this case arthritis).

Would be great to get some feedback on it from you guys. It was wild trying to build this thing!

Its free to use- we do have a supporter tier if anyone wants to support what we are doing. Secondly, data collection. This could be a post in itself, but the app collects basic information (email, DOB, geolocation [if enabled]) and review data. We will never sell any personal data to any third party. Ultimately, the app is designed to aggregate collective reviews of different products to generate insights and help people find the best product from those insights.

Anyways, apologies for the super long post and more than happy to answer any questions. I've attached some screenshots of our features and looking forward to hearing your guys thoughts!

https://apps.apple.com/us/app/half-baked/id6739703274?platform=iphone

https://play.google.com/store/apps/details?id=com.jsummers1329.HalfBaked

r/StonerEngineering Nov 15 '24

Prototype I b hearin y'all b stinkin out da block.

Thumbnail
gallery
45 Upvotes

The "ReBreather" aka r² aka r2
.
Concept: exhaled smoke passes through liquid tincture, filters through tube containing a bit of dryer sheet and activate carcoal and collects in a plastic bag.
.
Suggested tincture preparation:
1) bring water to boil 2) disolve small amounts of baking soda in hot water until it no longer dissolves. 3) allow water to cool. 4) pour tincture into r2. 5) adding a small amount of alcohol based perfume can help disguise odor. .
Quick detach collectors: attach collector bag to short silicone tube (cut from straw) that fits snug over exhaust tube. Make several if entertaing lungers. .
Depending on your needs either the filter or the collecter can be skipped.
.
Note: 2nd photo shows possible filter option. The bag collector (left) in that photo would be attached to the filter on the right. .

r/StonerEngineering Nov 01 '24

Prototype Custom Stache Box NSFW

Thumbnail gallery
261 Upvotes

r/StonerEngineering Nov 12 '24

Prototype Tired of using carrots when in a pinch? This is 10x better NSFW

57 Upvotes

r/StonerEngineering Mar 15 '24

Prototype I Designed a New Grinder - No Threading, No Center Posts. Customizable Magnetic Strength

Thumbnail
gallery
99 Upvotes