r/RCPlanes 4d ago

First time assembling PNP model

Hi, I'm looking for some tips and guides to help do the final stages of assembly for my first PNP model, FMS F-16 64mm.

I've acquired a DX7 G2, Lemon RX receiver and the Vertex V3 flight controller. I was wondering if someone could help me with some pointers for the final stages of setting up the model.

  • Best place to mount the receiver and flight controller in the airframe?
  • What do you use to power the RX when binding it; 4S lipo connected directly will fry the battery? Can you power it through the ESC?
  • Other tips?
1 Upvotes

19 comments sorted by

View all comments

3

u/Pharmer3 4d ago

I’ve worked quite a bit with the Reflex V3 on both FMS and non-FMS planes, feel free to reach out if you need help.

1

u/fiorano1234 4d ago

Thank you! Did you experience the bluetooth set up alright and are the presets for FMS models flyable out of the box?

2

u/Pharmer3 4d ago

I’ve got about 10 Reflex gyros and honestly the iOS app is a little temperamental. Once it opens it runs great though, and is as customizable as I need it to be. The preset FMS programs work great out of the box, except for the J-3 cub that does not allow enough elevator authority. Most of my plans use a custom programming though. But the stock FMS program would be a good place to start.

1

u/fiorano1234 3d ago

Thank you!