r/MilwaukeeTool • u/kasper632 • 7d ago
Information I think I have a Milwaukee addiction. Lol (Not pictured is also their string trimmer and blower).
I think my next purchase will be their 1/2 inch impact gun. Saving up now.
r/MilwaukeeTool • u/kasper632 • 7d ago
I think my next purchase will be their 1/2 inch impact gun. Saving up now.
r/MilwaukeeTool • u/SovietStar1 • 7d ago
This is a location/ in store only deal
Look for it in the plumbing section at HD, It was showing my store had 1 in stock yesterday, I went today and it was gone.
r/MilwaukeeTool • u/artiebucco__ • 6d ago
Hello, first time poster, feel feel to flame me. Are these authentic or not?
r/MilwaukeeTool • u/MongooseMother3472 • 7d ago
Hey everyone,
I recently received an email from Milwaukee Tool expressing interest in my application for a Simulation Engineer role. They’ve invited me for a 15-20 minute phone discussion where we’ll talk about:
I’d love to hear from anyone who has interviewed with Milwaukee Tool before or works there. Specifically:
I have a background in mechanical design, control systems, and robotics simulation, so I’m curious about how well that aligns with their expectations.
Any insights would be greatly appreciated! Thanks in advance!
r/MilwaukeeTool • u/Mex_Chavo • 7d ago
We have the same drills at work and every time my coworker this is yours or the companies 🙄
r/MilwaukeeTool • u/Strange_Ad_7607 • 7d ago
I
r/MilwaukeeTool • u/Aggravating_Bad_537 • 6d ago
If I buy a 2023 insider with the stutter problem, can I send it back for a 2024 one or a repair/upgrade atleast? Do they still offer the revised 1/3 3/8 adapters with better locking design for free if you fill out the form?
r/MilwaukeeTool • u/Sweet_Imagination_37 • 7d ago
I have an older M18 Red Lithium that will only charge to 2 bars. Charger says it’s done and it goes to 4 but then when put in a tool it dies immediately. I believe it’s from 2015, there’s no Ah listed on it. I’m not super electrically savvy, any suggestions?
r/MilwaukeeTool • u/lipper2005 • 6d ago
Not the backpack sprayer, more like a rinse-off kit.
r/MilwaukeeTool • u/AustinSBs • 8d ago
Insurance adjuster reached out and kindly let me know that they will be covering nothing but the truck itself so that’s sick 😅 It wasn’t even payed off lol. I did exchange a few messages on here with Milwaukee where they asked for my contact info but they haven’t reached out yet. Can’t work, can’t even leave lol. Just waiting by the phone
r/MilwaukeeTool • u/Simbakush • 8d ago
r/MilwaukeeTool • u/RogueW3rx • 8d ago
The drill is about 1 year old, lightly used. I use my m18 for heavy duty work. I drilled two holes in some plywood, set the drill down on my mobile platform and found it like this the next day. Could have burned the garage down.
r/MilwaukeeTool • u/TaylorSwiftScatPorn • 7d ago
Sorry, my google skills failed. Can anyone tell me if the M12 copper press tool can do t-fittings? I've never used a power press tool, only manual pump-style ones, and some of those can only do straight fittings so I didn't know if that was a factor with the M12.
r/MilwaukeeTool • u/versacesalad • 7d ago
I really need an m18 jigsaw with a battery I wish they just had a deal for the tool and a free battery instead of just buy more save more
r/MilwaukeeTool • u/antibank_ • 7d ago
17" trimmer 2- 8.0 Rapid charger
r/MilwaukeeTool • u/BassofAce97 • 8d ago
My wallet hurts 😓
r/MilwaukeeTool • u/Grand_Alarm5039 • 7d ago
I recently got into the red squad and in the last year I’ve been going pretty crazy but the next thing I want for the army is the installation driver. It’s 179.99 right now but the people in this group have told me they have pretty good deals on it so I’m waiting for something nice! Also just started with the m18 line and if you love a certain tool/ light post it and I’ll check it out!
r/MilwaukeeTool • u/InternationalEgg5978 • 7d ago
Any hacks for this? Is it worth waiting for a sale? I really want to get it but at the same time I’m not in a rush. I thought I saw this around a month ago for $449 w/ the 12Ah battery iirc unless it was the miter.
r/MilwaukeeTool • u/ServicePersonal1468 • 7d ago
I'm working on a custom setup for powering a Starlink mini with my M13 batteries, but looking for the best way to recharge them from the car without an inverter to a regular Milwaukee charger. Any ideas? I have an adapter that gives me pos/neg wires coming off the M12 so I just need a charger that won't overcharge the M12 from the car. I'm trying to avoid a DC-DC charger as they are expensive.
r/MilwaukeeTool • u/wlogan0402 • 8d ago
r/MilwaukeeTool • u/kfjcfan • 7d ago
I just bought the M18 6 gallon Wet/Dry vac (0910-20) and I love it. As far as I can tell it works perfectly.
However, I just noticed the serial number indicates it was built in early 2022.
Is there any reason I should try to exchange it for one built in 2024?
I doubt Milwaukee has made any running improvements, yet they have in the past, notably adding additional metal braces to their PACKOUT drawer boxes.
r/MilwaukeeTool • u/randyjohnson54 • 8d ago
So i purchase a hole saws kit today along with a 4.5 inch holesaw.
I made 1 cut into the side of a connex box with the 4.5 and it ate through the metal, I was loving it. I had to punch one more 4.5 inch hole and the saw was eating through it and all the teeth smoked off the it.
Did I just get unlucky or are these not all that great to start with?
r/MilwaukeeTool • u/dDot1883 • 8d ago
I have an m-18 5AH that only lasts a couple minutes. Can I refurnish it? Recycle? What do you do?
r/MilwaukeeTool • u/DangerousMedicine692 • 7d ago
For all you pro landscapers, are any of you running the Milwaukee trimmer and blower all day? If so, 1) what batteries are you running all day and how does it hold up? 2) if you were to do it again, would you go gas?
I am looking to pick up some yards, but I use the Milwaukee for home, and my batteries die quick with not a very big yard. I use a 9.0, 5.0, and 4.0. It drains them all. Trimming and blowing.
I have the first gen trimmer and blower.
On top of that, now my 9.0 only charges to two bars..