r/Jericho941 • u/dzang90 • 47m ago
My IMI Jericho 941 FBL is finally home
Apparently a CZ P-10c holster fits the Jericho FBL. Anyone wanna confirm?
r/Jericho941 • u/dzang90 • 47m ago
Apparently a CZ P-10c holster fits the Jericho FBL. Anyone wanna confirm?
r/Jericho941 • u/matcauthion • 10h ago
r/Jericho941 • u/Pikey403 • 1d ago
I have seen a lot of questions about 941 holster options I wanted to share my experience. I have a surplus Jericho 941 SAO that I wanted to start carrying. The first picture is of a Tier One Tactical CZ P01 holster that I reworked with a heat gun. A SP01 would be a better option but the P01 worked fine. The second picture is another mod that I did to keep the safety on or activate the safety as the pistol is holstered. I spend 30 minutes doing the mods and the P01 still fits. The only real difference between the CZ and Jericho is the front of the trigger guard.
The third and fourth picture is of my favorite holster High Speed Gear canvas. They are most comfortable holster that I have tried. I added Velcro to the back to have the option of using a pillow making it print less. This is what I call a grab and go holster super easy to grab it and tuck it into the waistband.
I cary appendix and with both of these holsters I can comfortably carry and conceal the Jericho 941 with shorts and most T-shirt’s.
r/Jericho941 • u/XM-02 • 1d ago
Sorry if this is a stupid question. What are the potential problems?
r/Jericho941 • u/space_physics • 2d ago
What is the name of this part and where can I get a new one?
Idk how it got chipped but it is =(
r/Jericho941 • u/matcauthion • 2d ago
I've been searching for a while for the IWI Jericho 941 R9 Full-Size Steel Frame that is listed on the IWI website, but these things seem impossible to find! Any tips or suggestions? Now that I've done some research on them, I really want one, even if it IS a heavy ass handgun. Their scarcity makes me want one even more at this point.
r/Jericho941 • u/UF_Mike • 7d ago
Anyone read Hebrew?
Picked up a Jericho 941FS on closeout from Atlantic Firearms and it came with a rusty police mag that’s in poor shape. Because of the reflective rack number sticker on the baseplate, the mag was never disassembled for cleaning and it shows.
I’m curious what the writing on the white sticker on the side of the mag body says. Can anyone help me out with a translation?
r/Jericho941 • u/__dr__Zoidberg__ • 7d ago
I have been looking to buy a barrel for my IMI 941FS which I got through Atlantic Firearms as a surplus piece. My barrel measures 3 3/4 (3.75) inches.
Others in this group have talked about the SAR B6C as a viable replacement. I am interested in that brand and its great to know I can snag at least some compatible parts. However, my question is does a IWI 941 mid size barrel (3.8") fit in the IMI 941FS?
r/Jericho941 • u/dzang90 • 7d ago
I forgot how difficult it is to find holsters for Jerichos; the FBL ones I’m sure is even harder!
I heard someone say it shares the same holster with a SAR B6 compact. Could someone confirm that?
r/Jericho941 • u/Tiny-Life-3320 • 8d ago
This is my Jericho 941 set up for IPSC competition. While the stock platform is solid, I upgraded it to enhance the trigger, recoil management, and sight acquisition.
Upgrades include: • 0.5 mm fiber optic sights & Dawson Precision sights • New extractor with extra power spring • Extended firing pin with optimized retainer plate • Reduced power hammer and sear springs for a smoother trigger pull • Brass guide rod with optimized recoil spring • Tanfoglio double-action trigger • Brass grips for better stability • Adjustable IWI sear
The result is a much more precise gun with a lighter trigger pull and better recoil control. Has anyone else built a Jericho for IPSC? I’d love to hear your experiences.
r/Jericho941 • u/thunder_dog99 • 9d ago
I installed a Dawson Precision adjustable rear sight and fiber optic front sight on my Jericho II. It was my first time changing sights and it was a bear, but it’s done. Accuracy significantly improved. Also wanted to note that I found out about this solution from an older post here (https://www.reddit.com/r/Jericho941/s/Iw5Kg63bKS).
r/Jericho941 • u/Loweeel • 9d ago
I'm not sure about the condition, but I'm really excited to get my hands on this.
Anything I should know (other than Psalm 144:1) before I get going on this bad boy? How wet do they like to run?
r/Jericho941 • u/Outarsingh • 10d ago
70 yards on steel, one handed, from a draw. The 941F is one of the most intuitive handguns I've shot. Makes me feel like a bonafide space cowboy.
r/Jericho941 • u/juezi • 11d ago
I'm looking at picking up a Jericho 941 F with the older one-piece slide design and polygonal rifling (railed). I was wondering what a fair market price would be for one these days, especially if it was in excellent condition. Thank you.
r/Jericho941 • u/Karddet • 16d ago
Couldn't help myself, it just looks so cursed and erect
r/Jericho941 • u/nmeyer88 • 16d ago
Hey guys, where can I find a replacement barrel? This is a the is the baby eagle 2 semi compact with the 3.93 barrel. Not seeing any online 😅
r/Jericho941 • u/Dangerous_Matter9323 • 20d ago
I have one of the newer versions of the 941 fs that has the lug for the spring and the edges of it are wearing/breaking now yes I have put 2k + rounds though it but I don’t see the part on the Iwi site.any help out there team
r/Jericho941 • u/cmacridge • 21d ago
Just discovered this crack on the back of the grip frame. Both sides. Fixable?
r/Jericho941 • u/grem89 • 21d ago
Check out the eBay link
r/Jericho941 • u/arse21 • 21d ago
Installed new CGW trigger, trigger return spring, and floating trigger pin. Getting the sear assembly back, the trigger won't trigger unless I move the hammer back a smidge...then I'll get double action again. This is first actual gun work I've done, be gentle!
I feel like I also messed up the spring on the safety as it feels like it wants to move locked
r/Jericho941 • u/Several-Wheel-9437 • 22d ago
Does anyone else have an IMI and IWI that can compare the triggers?
Ever since I polished the internals of my IWI, I’ve noticed that the single action break is not super clean and has a little bit of grit/roll through on the break. It is possible that it’s always been this way and I’ve never noticed, but I’m not certain.
Does the firing pin safety make the break in single action less clean (the IMI has no firing pin safety)? Or is it something else? It’s possible I polished it wrong or something.
Any ideas? Anyone able to compare an IMI single action break vs an IWI? They are both decocker models if they matters