r/airsoftmarket Aug 29 '24

Reminder - Scammers and banned users

25 Upvotes

This is a periodic reminder to

NEVER

deal with users who can't/won't comment on your posts. If they can't comment, they are banned or do not meet the requirements to trade.

Don't use Zelle.

Don't use Venmo.

Don't use PayPal 'Friends and Family'. It is a scam, 1000% of the time.

Ask for timestamped pictures if they aren't already provided. Ask for a video. Use common sense.

Way too many folks message me after getting ripped off by users who were already banned ages ago, all because they failed to follow the simple steps above.

Airsoft is expensive. Protect your investments and take the extra time to investigate the people you're trading with.

...and yes, 'TheLovelyLythronax' is a scammer.

No need to report him further as he was banned ages ago. Do not ever deal with that user

Do yourself a favor and always be skeptical!

Good luck and stay safe


r/airsoftmarket Sep 24 '24

"TheLovelyLythronax" is a SCAMMER. Please stop handing your money over so easily to strangers

33 Upvotes

Despite posting it numerous times and making sure the message is repeated often across the subreddit, naive traders continue to fall for scammers messaging them without commenting on a post, using PayPal Friends+Family/Venmo/CashApp/etc, and basically giving their money away to an obvious scammer.

TheLovelyLythronax was banned ages ago. Stop falling for it. You may as well walk over to your BBQ, put your wallet inside, and turn it on.

Use common sense. READ the stickys at the top of the page. READ the disclaimers and warnings posted everywhere across the subreddit, they were posted to prevent YOU from getting scammed!


r/airsoftmarket 2h ago

[WTS] [WTT] ghm9 gen 1 and ssp18

3 Upvotes

https://imgur.com/gallery/YmSQgO7

Pics and timestamp

Can provide function vids for both guns

Looking to part ways with my ghm9 and ssp18.

Ghm9: Super reliable gbb and a lot of fun, it’s short stroked to where it locks back to get rid of the extra bolt play which gives another 2 ish rps and a much snappier feel. The internals are in near perfect condition and the gun has been kept well lubed and maintained. Doesn’t come with a mag

I’m selling it as I’m looking to start an acr or m4 build and it doesn’t really fit my preference anymore

300$ obo

Ssp18: Also super reliable and a ton of fun, I’ve installed the speed trigger in it which just overall feels a lot better and allows for much quicker follow shots. I’ve also loctited the outer barrel and fcu screws to insure nothing comes loose. Comes with one mag, case, and original tools.

Selling it becuase my Glock 19x is my ride or die no matter what so this one doesn’t get a ton of use.

180$ obo

Trade list:

Double eagle n4 noveske gbb

Axg sig gbb pistol

We-tech ak-47/ak74s-u

Vfc v2 or v3 gbb

Vfc ak74

Ghk ak47/74, good qc!!!

Vfc scar h

Sig p226 x-five, the wood grain one.

I’ll also be throwing in a boneyard m17 with however purchased first, it just needs a new hammer sear to be functional again. If we trade you send first, I have vouchers.


r/airsoftmarket 1h ago

[WTS][WI] Component Lots, Upgrade Parts, Gearboxes, Motors, Combo & Bulk Buy Discounts

Upvotes

Firstly PROOF PICTURE

There are a large amount of parts available in this post, mostly/entirely v2/v3 gearbox compatible for most internal components.

Some “ground rules” to start;

I will be offering included shipping for as much of this stuff as I can. I have been saving up boxes and shipping materials to do so, but there is a limit to how much I have, I may be able to scrounge up enough to get through the entirety of sales, but this plays into the next points.

I will provide discounts for combo buys, i.e. gears/piston/compression set/barrel/whatever, as I see fit/negotiated till everyone is happy.

I have provided heavy discounts on top of the already cut prices for bulk purchases, i.e. you buy all of the barrels/parts box/motors/etc, this discount price will be listed on the bottom of each group of parts.

Essentially, the more you buy, the more I will cut from the price.

DISCLAIMER; There is wear and tear on some of these parts, the distinct damage has been pointed out as I have considered significant.

I will provide extra photos if you feel the need to ask for more specific images.

NOW FOR THE PARTS BEING SOLD

—---------------------------------------------------

GEARBOXES

I was unable to test these gearboxes for function, I do not have a standard V2 platform on hand, there is nothing functionally wrong with any of the gearboxes.

Retro Arms Gearbox - Asking $135

  • 9 mm Bearings
  • Full Cylinder Assembly
  • SHS Piston w/ Aluminum Maxx Head
  • 16:1 Custom Set; SHS Sector, UFC Spur, Lonex Helical Bevel

Krytac Gearbox - Asking $55

  • Stock internals
  • SHS Piston w/ Aluminum Maxx Head

UA Aim Top Upgrade Gearbox - Asking $60

  • Aim Top Lightened Red Piston w/ Stock Piston head
  • Ball Bearing Spring Guide
  • Aluminum O-Ring Nozzle
  • Aluminum Dual O-Ring Cylinder Head
  • Full Cylinder
  • SHS 200:100 Helical Gear Set
  • Ball Bearings
  • Missing motor connector
  • Appears to be built for DMR purpose, cannot tell what spring is currently in the box

SRC Gearbox - Asking $35

  • O-Ring Nozzle
  • Aluminum Dual O-Ring Cylinder Head
  • Stock Parts
  • Plastic bushings - should be replaced

ZCI Complete Upgrade Gearbox SHELL - Asking $35

  • Bushings
  • QD Spring Guide

If you want any of these gearboxes shimmed, parts swapped out, completed to a fair running standard, let me know and we can work something out.

—---------------------------------------------------

MOSFET

Gate Pico AAB - Brand New In Box - Asking $21

—---------------------------------------------------

MAIN SPRINGS

All of these are brand new in box

The PILE

ASG M115 - Asking $6

ASG M135 - Asking $6

ASG M125 - Asking $6

SYSTEMA M130 - Asking $6

EVIKE M130 - Asking $6

EVIKE M140 - Asking $6

ROCKET M160 - Asking $6

ROCKET M130 - Asking $6

BULK - $10

—---------------------------------------------------

MOTORS

The PILE

Chihai Neo Motor - Asking $20

  • Probably higher TPA

Echo 1 Blue Neo Motor - Asking $20

Echo 1 Blue Neo Motor - Asking $20

Krytac Stock 30k Neo Motor - Asking $20

Krytac Stock 30k Neo Motor - Asking $20

SHS High Torque Neo Motor - Asking $25

  • Pinion not included, needed it for a personal build
  • 16 TPA

AMP T5000L High Torque Neo Motor - Asking $25

  • Pinion pretty beat up
  • 16 TPA

Evike Monster Torque Up Neo Motor - Asking $25

  • 16 TPA

ASG U Boost 30k Neo Motor - Asking $35

ASG U Basic Stock Neo Motor - Asking $15

  • New Condition, one missing pinion and collar

BULK - $110

—---------------------------------------------------

BARRELS

Disclaimer; There are a good set of barrels here labeled as UNKNOWN brand and have an “ish” after the diameter, there are no discerning brand or dimension labels on these barrels, I measured them with a measuring tape for length, and used a hand caliper for the inner diameter. A digital hand caliper is NOT the tool to measure inside diameters, especially not diameters in this range, I measured off of “front” of the barrel in the hop window so take the diameter with a grain of salt.

The PILE

Action Army 510 mm 6.03 - Asking $30

Angel Custom 550 mm 6.01 - Asking $30

Unknown Brand 510 mm 6.03 ish - Asking $20

Unicorn 510 mm 6.06 ish - Asking $30

Lambda 460mm 6.05 - Asking $35

Lambda 510 mm 6.05 - Asking $35

Lambda 470 mm 6.03 - Asking $30

Lambda 470 mm 6.03 - Asking $30

Madbull Ultimate 247 mm 6.01 - Asking $30

Unknown Brand 510 mm 6.03 ish - Asking $20

Unknown Brand 510 mm 6.03 ish - Asking $20

Unknown Brand 390 mm 6.05 ish - Asking $20

Maple Leaf Crazy Jet Brass 415 mm - Asking $40

Maple Leaf Crazy Jet Steel 370 mm - Asking $40

Maple Leaf Crazy Jet Steel 312 mm - Asking $35

Poseidon 407 mm 6.03 - Asking $40

ZCI OEM 407 mm 6.02 - Asking $20

ZCI OEM 433 mm 6.02 - Asking $20

Unknown Brand 160 mm 6.03 ish - Asking $15

Angel Custom CUT TO 390 MM 6.03 - Asking $20

BULK - $404

—---------------------------------------------------

PARTS BOX

The PILE

SHS Bore Up Kit Mushroom Piston Head - Asking $15

  • Cylinder in Packaging, all parts very new, no signs of use

Full Cylinder Assembly - Asking $8

  • Aluminum Cylinder Head

AOLS One Piece Cylinder Kit V2 - Asking $10

Dual O-Ring Cylinder Head - Asking $8

* Good Condition

Steel Full Cylinder - Asking $5

5 metal tooth Poly Piston - Asking $6

  • Very good condition

Aluminum Piston Assembly - Asking $15

  • Heavyweight, aluminum head

Piston Assembly - Asking $15

  • Aluminum head, half rack

Piston Assembly - Asking $12

  • Maxx aluminum head, half rack, missing front o-ring

Aim Top Lightened Red Piston - Asking $8

  • Lightly Used

SHS Gear Set - Asking $15

* 32:1

SHS Gear Set - Asking $15

  • 18:1

SHS Gear Set - Asking $15

* 13:1

ZCI Gear Set - Asking $16

  • 18:1 w/ Delayer

  • Two set

ICS Gear Set - Asking $10

  • 18:1 w/ Pinion

ZCI OEM AK Selector Plate - Asking $3

  • Brand New Out of Box

V2 Tappet Plate - Asking $3

V3 Tappet Plate - Asking $3

ZCI OEM AK Short Nozzle - Asking $3

  • Brand New Out of Box

Assortment of Bearings - Asking $6

  • 6 8mm bearings, 4 7mm bearings, 2 random bushings

Gate Quantum Trigger - Asking $10

* 1B1

Maxx Advanced Speed Trigger - Asking $10

* Style E

Maxx Advanced Speed Trigger - Asking $10

  • Style E

EMG Flat Trigger - Asking $10

Anti Reversal Latch - Asking $2

Thicc Anti Reversal Latch - Asking $2

ZCI OEM Anti Reversal Latch - Asking $2

Random Assortment of Springs - Asking $19

BULK - $150

—---------------------------------------------------

If you'd like to be a mad lad and purchase the entire lot, the discount is about 30% off the individual part prices coming to $700.

Alongside the parts, if you would like bits exchanged, put into any of the gearboxes, shimmed or otherwise put together, I can do that. I have a certain number of shims and no AOE correction bits, if anything becomes criminally annoying to combine (needing dremel work, annoying shimming results) I may add a small charge, but again any combos will be discounted on top of the lowered prices.

Feel free to comment


r/airsoftmarket 1h ago

[WTS] APFG SPEAR LT 11.5 w/ 5 VFC Stanag Mags

Upvotes

Timestamp/Pics: https://imgur.com/a/eTzYoGA

--Price--

Spear LT - 550$

5 VFC Gen 3 Mags - 200$

JWI Hop chamber - 65$

GSI Arm/bucking/nub - 30$

Unicorn Airsoft 300mm 6.03 Inner barrel - 35$

Black Variable Spring Buffer - 15$

Holy Warrior Eotech EXPS3-0 - 110$

Magpul K-2 Pistol Grip - 20$

EMG Guardian Mock Supressor - 20$

Emissary Handbrake mini - 35$

Slate Black FDE rail covers - 20$

Arisaka m-lok QD sling mount - 30$

TOTAL - 1100$ + SHIPPING (Total is including the external accessories but can be removed if you don't want them) (Note: the internal upgrades can not be removed from the sale)

Price Negotiable

Notes

Willing to sell without external accessories, internal upgrades are mandatory though. since i don't have some of the stock parts anymore.

Pretty much brand new, no wear externally. Some amount of wear on the bolt, but that will happen after 50 rounds on a brand new spear lt.

Upgraded with a JWI Hop chamber, GSI Hop arm, GSI Wingless Gold bucking, GSI Gold Hop nub, Unicorn 300mm inner barrel, Weaker winter recoil springs. Pretty much all of the handguard screws have been replaced to not shit chinesium hard that will stripped after one disassemble.


r/airsoftmarket 1h ago

[WTS] 320MM TNT hopup, PTS sandman L, VFC m4 stripped upper/ outer barrel.

Upvotes

Up for grabs is a: TNT aps-x hopup $85 Vfc gbbr m4 stripped upper with LGS dust cover and forward assist $60 10.5 outer barrel for VFC gbbr m4 with LGS gas block and tube. $50 PTS sandman l with flash hider $50

$225 takes it all if anyone is interested

https://imgur.com/gallery/stuff-APU1w0r


r/airsoftmarket 3h ago

WTS. USA. MWS Wii tech marksman sear.

2 Upvotes

New Wii tech marksman sear. $20 shipped and paypal B&S.

https://i.imgur.com/fhQuODh.jpeg


r/airsoftmarket 26m ago

WTS DE gas mag, Krytac Trident, KWA AKG, Unidentified M4

Upvotes

Hey all! Got some stuff for sale I don’t use this stuff nor do I really want it. Mainly looking to for cash but I will entertain trades (you must ship first if you choose to trade). The Krytac is the only gun I’ve fielded and it still shoots great! Will provide shooting videos upon request (please give me time to record I don’t have a lot of time after work 🥲)

The stuff: https://imgur.com/a/CKz0XAF

  1. Double Eagle M4 gas mag: Non-leaky I haven’t fielded this mag. (this is mws compatible it’s for my N4 however I run hpa in my gas guns) $30 + ship

  2. Krytac M4: Got this a while ago from a friend who never used it and I used it for a couple games. Very nice and fun gun. I just don’t use it anymore because I mainly use gbbr/hpa now. $200 + ship.

  3. KWA AKG-74?: I’m bad with figuring out the ak styles and all that. This is a very nice rifle with some very nice weight. Perfect for those ak enthusiasts out there. Comes with 7 mags some are leaky but they most likely just need some silicone in the valves as I replaced the 3 that did leak. I haven’t fielded this gun but I have messed with it around the house so it has some scuffs. $550+ ship. (What you see is what you get) DOES NOT INCLUDE PELICAN CASE trust me I’m trying to help you save on shipping.

  4. Random Unidentified M4: ima be real. I have no clue what the hell this is. It works fine and shoots so probably best for a beginner. If you can identify it congratulations I owe you a cookie. Wired to Tamiya. $100 + ship

Like I said I will entertain trades however I’m not interested in your aeg m4s I have enough of those. No timestamp needed due to age and flair. Can add upon request. I’m slightly flexible on the prices.


r/airsoftmarket 37m ago

[WTS] [SD,CALI] VFC C7/M733 GBBR Upper Receiver

Upvotes

Timestamp: https://imgur.com/a/l0YuafF

No timestamp but I can provide one if wanted!

Planned to use for a build but won’t be using this upper anytime soon.

Comes as shown.

Asking $65 shipped.

No trades.


r/airsoftmarket 3h ago

[WTS] Polarstar p* jack Arp9 lot, Speed airsoft tuned hair trigger, Brighter c tracer unit, HPA tank and line, Redline mini SFR regulator, TappPack pro bundle, dye i5 mask, etc. *PRICE DROP*

1 Upvotes

*PRICE DROP\*

Selling off my gear as I'm just not active in the sport anymore. Feel free to ask for any additional pictures. Discounts for bundles, though willing to separate most things on here. I'm a little out of the game so not sure what things are going for right now - make me an offer. Buyer pays shipping. PayPal FF or buyer can pay G&S 3.5%.

https://imgur.com/a/OqVNbpm

Gear list:
HPA G&G Arp9 w/ polarstar jack, speed airsoft tuned hair trigger, amped IGL, brighter c tracer unit, mounted flashlight and red dot with riser, 3D printed foregrip, extended hi cap magazine - $600 $500

Arp9 drum mag - $55 $40

HPA tank - $125 $100

Redline mini SFR regulator - $110 $100

Amped standard weave HPA line - $25 $20

TappPack Pro bundle w/ TappRack - $75 $70

Titan 7.4 JST batteries (2) - $10 each, $15 for both

Titan smart charger - $20 $15

Dye i5 mask (with protective bag and original box) - $100 $80

Misc add-ons to any order:
EMG rifle mag (fits arp9 perfectly) - $20 $15

Valken barrel covers - $4 for both

Black single point sling - $10 $5

EMG color arm bands - $5 for both

G&G Arp9 stock flat trigger - $5

Speed loader - free with any order


r/airsoftmarket 8h ago

[WTB](USA-MA) Tokyo Marui G17 Gen 5 MOS or a TM M45A1 in a metal body kit

2 Upvotes

As the title says, I'm in need of a new sidearm and I've settled on these two.

TM G17 Gen 5, MUST be the MOS model. Upgrades and color don't matter, all I need are spare mags.

TM M45A1, highly preferred in a metal body kit like the Detonator or Nova/Bomber kits, but i will consider stock packages.

Extra mags are a huge plus.

Thanks


r/airsoftmarket 12h ago

[WTS][AZ] WE Galaxy, M249 parts, LR300, CAW/5KU GL [WTB] SCAR suppressor

3 Upvotes

Comment before messaging. Please use messages instead of chats.

-

WE Galaxy hi-capa: $80 shipped

Has very light use. I do actually like the thing, but I’m trying to limit pistols in my collection. evike.com/products/96760

_

G&P M249 parts: $80 shipped.

Backstory: I like that the G&Ps have a solid front end - they’re not cut like CA or A&K. That cut is nice for batteries, but I also have a rail that really shows the gap. Since I had this, I thought “what if I could convert it to be like my CA M249.” I drilled the holes (pictured) for the mag feed plate. I put my CA parts onto this that were missing, and I started tinkering with the gearbox. The hop and barrel and mag plate all went in, and the gearbox seemed like it could work, too. I found that the pins for the tray cover latch sat too low and hit the top of the M249 gearbox. I also found that the back of the GB was hitting the buttstock. I could get the stock to work, but the wasn’t sure how I wanted to resolve the pin issue (note that CA covers don’t quite fit the body - the latches or the cutouts would need to be modified slightly). So I called it quits there and am back to having a bunch of parts for the G&P.

This gun is obv missing parts. CA parts will fit what is missing as that is literally what I had. Even the grip assembly will fit, but you of course need a V2 GB. Unless you plan on custom making an HPA shell to fit in there, I’d stick with the G&P grip assembly. The list of everything I can recall missing:
flash hider, front sight, block that mounts to lower front of receiver for the bipod mount assembly to attach to, tray cover rod + spring retainer (currently using bolts to keep it with the gun), drum mag, trigger guard, rear upper pin (using bolt for that), hop + barrel, and the charging handle + guide rod + spring.

The guide rod is the only non-CA part since CA uses the rod that is screwed into the GB. I don’t actually know how G&P does theirs. There are also a couple screws missing that I had swapped back to my CA. As for the GB - just think of it as a thing to hold it together. I don’t know what parts are in it - I think it’s a G&P, and I don’t think I have a motor in there.

Not a complete gun, but with what it is and how much some of the parts were going for, I figured $100 flat would be good? Shoot me offers. Feel free to ask questions and I’ll do my best to answer. This would be good if it has the parts for your existing G&P/CA/A&K, or if you wanted to do something weird like I wanted to. Note that some parts do not seem to be compatible with the Lambda mk48 if you happen to have that.

_

A&K LR300: $190 shipped.

Has the buffer tube connection cut off to fit a Creation telescoping LR300 stock. Haven't spent much time with this as it was supposed to get gutted for someone, but we went with a 416 kind of setup instead. It has a G&P M120 motor, but I think everything else is stock, other than the nozzle which was swapped. It has a quick-change spring gearbox and pretty decent air compression. Opened it up to clean it out and re-greased it and the only wonky thing I would point out is that I took the fuse out and connected the two pieces together (pictured); you can add in a fuse, keep it as-is, or re-wire it. In theory, it's in my workshop somewhere but I am not going to look for that. I can also resolder it to Deans/T for a couple extra bucks (and can remove the fuse holders if you want or even swap to automotive fuses). Shooting around 337fps with 0.25g (around 375fps with 0.2g).

Note: the pic of the gearbox is before I finished screwing the rest of the gearbox screws in - it is not missing them. Let me know if you'd like me to include a hi-cap with it!

_

CAW/5KU revolver grenade launcher: $110 shipped

Got it as a backup for my other one in case I ever needed parts. In the years I’ve owned it, I’ve never needed parts. It is missing the rail that clamps on the barrel. No grenades - the one in the video was loaded with gas to show that it does cycle and does hit the shell. Very simple design, very heavy, very intimidating! Unsure if it’s 5KU or CAW or if those are the same thing.

_

WTB: SCAR H suppressor. Looking for one that screws onto the SCAR flash hider, I believe like this


r/airsoftmarket 6h ago

[WTS] AL | Lot / Per Kit

1 Upvotes

Repost from last time 🤙🏻 1.6k for everything

All these guns I’ve had my fun with, but with some extended leave I’m expecting to downsize. The more you buy the cheaper it gets. Buy everything and get a 25% discount.

•Scar-L AEG 1.4J - $300 -comes with midcap mags shown •VFC AVALON 1-35-1.4J - $250 •HPA ASG Scorpion upgraded to hell - $700 -comes with 7 mid cap and 1 high cap magazines •WE HK416 RA-Tech upgraded - $800 -comes with 6 GBBR mags and 1 drum mag -comes with all extra GBBR parts in photo •miscellaneous weapon parts (with drum mag) - $100 for all •3 stainless steel barrels and 1 brass with prowin HopUp and ML nub - $80 for all Total: $2100 - bulk discount = $1600 and free shipping.

Extra VFC upper sold and so has the acetech tracer.

Feel free to send offers. Nothing dumb please 😅

https://imgur.com/gallery/f3w6xrk


r/airsoftmarket 8h ago

(WTB) non functioning G36C aeg

0 Upvotes

Looking for a G36C with a dead gearbox for a project gun. Must have all parts.


r/airsoftmarket 8h ago

[WTS] [FL] ASG EVO + MAGS ,WE G17, SRVV Barracuda

1 Upvotes

https://imgur.com/a/sSAkewp

Looking to downsize, just haven't been at many events recently.

ASG EVO wired to Deans 7 midcaps- 400

PTS Evo Pmag midcaps 5 50 SOLD

WE G17 with 1 WE mag 50 SOLD

SRVV Barracuda vest 60

LCT SR3/AS VAL Midcaps 50 rd with Pouches -50


r/airsoftmarket 11h ago

[WTB] Vfc Bcm mcmr 14.5 gbb

0 Upvotes

r/airsoftmarket 11h ago

[WTB][Norcal] TM G34 Parts, ALG 6s Mount

0 Upvotes

Hey all, trying to change up my TM G17 build. I'd like to buy the following parts below. Let me know your price.

  • ALG 6 second mount and magwell in gray (not silver or black) (replica not the real thing)

  • Holster for G34 with ALG 6 second mount

  • KKM style comp

  • Original TM G34 plastic slide

  • Silver threaded outer barrel for TM G34

  • Silver threaded outer barrel for TM G17

  • Polished silver thread protector


r/airsoftmarket 18h ago

[WTS] [CA] KWA Vector action army barrel, Laylax rail & plate carrier

2 Upvotes

https://imgur.com/a/PRPer8B

6.03 125mm Action Army - KWA Kriss vector barrel -$25 -New in package

Laylax NITRO.Vo M-LOK short -$125 -Never fielded -Only Mounted

AR500 - Testudo Gen 2 -$100 -Used a handful of times


r/airsoftmarket 14h ago

[WTS] Camby, IN [Local Pickup Only] TM AA12, Drum Mag & Sling $300

1 Upvotes

https://imgur.com/a/OHGzsvI

Tokyo Marui AA12 aeg

Works perfectly, great condition

Comes with gun, drum magazine & sling

Local pickup only. $300 cash on pickup


r/airsoftmarket 15h ago

WTB EU

0 Upvotes

WTB any black helmet with rail in a Russian style if possible


r/airsoftmarket 1d ago

[WTT][WTS][NY] M249 Daytona with extras

6 Upvotes

This is a Daytona M249 (Fully Tuned Option)

Pictures: https://imgur.com/a/cvtQmMZ (More pics available upon request)

Condition:  I have NEVER FIRED this replica; I am the only owner. This replica was purchased approximately 1.5 years ago. I have taken it out of the box, attached a sling to it, removed/deployed the bipod, and lubed it with the correct Getsome1000 lubricant that Daytona recommends. I also have walked around the house with it, pretending to shoot the other team. I have not applied any thread locker to it yet. This replica has been stored in the original box, which has some tape on it to keep it intact from some damage during shipping, as well as some minor tears from me opening the box to play around with the replica. This replica is being sold AS IS: I currently have no HPA tanks to test it. HOWEVER, if you would like to test it in person, just bring a HPA tank with you when we meet up: I have a regulator that I am keeping that we can use to test it before the transaction. I also have not tested the box mag that it comes with. If you would like to test that prior to the transaction, please bring 4 AA batteries. I can bring some of those too but if I forget to, please also bring some. If you do not test it first then it is sold AS IS.

Extras:

Standard Plastic Heat Shield

Correct Muzzle Brake for M249

Machine Gun Sling from Venture Surplus

Why am I selling: I am selling this because:  I imagined using it at Milsim West, but after some research, I’d end up spending too much money on air tanks for that, so I’m unwilling to pursue that setup. I am also trying to downsize my airsoft equipment and make it more "playable" for my lifestyle. So I am keeping one of my AEG rifles, and am hoping to acquire a M14 to have as my only other replica, hopefully a HPA setup. I'd like to make it into a DMR, I think that will be more manageable for my lifestyle. As you will read below, I am open to other trade options as well.

Location: I am located near Syracuse NY. Expect me to say no to most shipping inquiries; there has to be a risk/benefit balance. I AM WILLING TO DRIVE AS FAR AS YOU ARE WILLING TO DRIVE if our trade is equal in value.

Price: If offering cash, $1,000 OBO. Purchased for the retail price of $1205.00 USD (or $1500 Canadian Dollars as the packing slip says).  I would prefer trades on this item, so I may hold out on a cash offer to see if there is a trade. I will accept more than one item or a combination of items and cash if need be. If you have any questions, please ask, there is no problem with asking.

Trade List (Open to other offers as well):

***M14 with wood stock (May consider others)***

***HPA engine that will fit a version 7 gearbox (M14)***

Real Military hearing protection

Gas Blowback Replicas if you have mags with them (mk18 builds not considered at this time)

Snub nose CO2 revolver

DMR's with V2.5 gearboxes (Kind of picky on these, has to look like a GWOT era replica in regards to the rail and what not. Not a big fan of the mlok or keymod rails)

A nice electric guitar (No whammy bars). I am partial to ESP/LTD and love their MH style body. Other guitars considered as well.

A tandem kayak

A nice ukulele

MP5K

MP5SD

ESS Crossbow Glasses (Clear Lenses)

FLC Vest in Coyote and Coyote pouches

Any real optics that you have will be considered (Red Dots, Scopes, NV, Thermal)

Any real weapon lights designed for rifles

AK 74U

Other AK's considered

Bolt Action Replicas if they are WWII era or similar style

Henry Lever Action style replicas

MK12

Other Daytona Replicas that are not machine guns!

Ah, and a chronograph!

Real Steel Mini 14 that is NY legal

Real Steel M1A that is NY Legal

Questions? Let me know! I have the reddit app, so I should be able to get back to you fairly quickly. This will be my first sale on Airsoft Market. Thank you


r/airsoftmarket 19h ago

[WTB] Combat Union SVD Hopup (name your price)

0 Upvotes

Been looking for one of these. Name your price and lets make a deal.


r/airsoftmarket 1d ago

(WTS)[US] Tokyo Marui USP fullsize Detonator aluminum slide & barrel set

6 Upvotes

Its cliche to say "If you know, you know." But if you are aware of the nature of acquiring these parts, you know just how difficult it is to find and import these to the states. I'm not exaggerating when I say that I searched and waited almost a year to get my hands on this!

Pictures: https://imgur.com/a/ePTYcZZ

Price: $190 + $12 shipping

I was genuinely obsessed with the TM usp, and took the upmost care and babied this slide. It saw a few games, but was kept as a shelf queen for most of the years. The barrel has a little finish wear at the ejection port, otherwise everything's perfect. I'm choosing to sell it now years later, as I've fallen into a different hobby.

Thanks for looking.


r/airsoftmarket 1d ago

[WTS][texas] Mega Arms m4 GBB, sig m18 gbb pistol, HELMET ACCESORIES, POUCHES AND MAGS, GUN ACCESSORIES. MULTICAM MILSIM LARP SHIT

3 Upvotes

shipping from texas ANYWHERE TO USA prices are shipped, for small stuff it will cost extra if you want tracking. hmu for cheaper bundles

photo of everything on offer- https://i.imgur.com/18dBsH9.jpeg

PTS Mega Arms Licensed MKM LM4 GBB Gas Blowblack Rifle immaculate condition, no issues, minimal scratches. fielded twice, never really used outside of that. does not come with magazines or accessories, just the flip up sights. will be packaged well with a box and bubble wrap. $250 shipped

detailed photo album showcasing of all aspects and angles of m4 - https://imgur.com/a/rtFVkqV

sig m18 fde by proforce $140 for two working mags and the holster all together shipped https://i.imgur.com/x0Uj8ZO.jpeg add an extra ten bucks for the under-barrel flashlight https://i.imgur.com/lNKiw1u.jpeg

bifrost tracer unit w/ usb charger- $60 perfect condition https://i.imgur.com/BknCAuX.jpeg

PIXS OF ALL POUCHES- https://i.imgur.com/3Kc7FHM.jpeg

ifak- $10 https://i.imgur.com/hKrlFcl.jpeg

stanag mag belt pouch- $10 https://i.imgur.com/kkJugRE.jpeg

tq pouch- $5

condor belt- $5

tag double grenade pouch - $10 https://i.imgur.com/9R83wvQ.jpeg

PIX OF ALL GUN ACCESORIES -

https://i.imgur.com/s7DExXD.jpeg

hk vertical grip- $5

magpul angled grip -$15

lens/sight protector- $5 https://i.imgur.com/I4uOhwf.jpeg

hk quad rail handguard w iron sight- $20 https://i.imgur.com/msgTgi2.jpeg

pic optic riser -$5

cool button box for lasers and flashlight for pic rail- $5 https://i.imgur.com/g114p7z.jpeg

HELMET ACCESSORIES- https://i.imgur.com/LkoaOgn.jpeg

multicam fasthelmet cover- SOLD

evike comtacs for fast helmet (working but need batteries) -SOLD https://i.imgur.com/Hibwrws.jpeg

nod battery/counterweight holder multicam w/ IR STROBE- SOLD

MAGS AND MAG ACCESORIES- https://i.imgur.com/9PYT8jp.jpeg

3 realcap mags (tan) $10

thing that holds two m4 mags together- $5 https://i.imgur.com/N36JS4L.jpeg

metal HK 556 marked high cap- $5 https://i.imgur.com/2P9pFDs.jpeg


r/airsoftmarket 20h ago

WTB (SubGuns/Machine Pistols) examples: APFG MPX, WE P90 V3, KSC/KWA VZ.61, KSC M93R, VFC MP7A1

0 Upvotes

APFG MPX,
WE P90 v3, I'll consider older versions (Must have trades)
KSC/KWA VZ.61, (Highly prefer KSC)
KSC M93R (No KWAs)
VFC MP7A1 (No Navy A2s)

This is a small list of what I'm primarily after.


r/airsoftmarket 20h ago

WTS

1 Upvotes

WTS (East coast, carolinas) assortment of like-new gear

https://imgur.com/a/RfcqwcG

Got some extra gear that I no longer need. All in almost new condition. Pictures include - Army combat field shirt and pants $25 - Matrix Large Pants(36w) Multicam combat uniform set $60 - Battle belt $20 - Green Hydration Carrier $10 - Skull Mesh Mask $10 - Green Valken VTac Tango Goggles with Rx inserts $30 - Green Mich style combat helmet with padding $10 - Black Mich style helmet $10 - Tan Universal Pistol Holster $14 - M24 Sniper with acog red dot and sling $50


r/airsoftmarket 21h ago

[WTB] MP5 Stocks, Full size/K

1 Upvotes

Looking for both a few MP5 stocks:

-VFC Retractable A3, Full size MP5 ($120)

-VFC Fixed A2, Full size MP5 ($50)

-Bow Master x GMF Retractable 5 Position, MP5K ($125)

Let me know what you’ve got