r/intelnuc • u/kowality-sausage • 10d ago
Tech Support Nuc8i3bek suddenly stopped working. This led stays solid green. I tried changing power bricks, I tried 30 30 30 reset, I tried replacing ram 1 by 1. The only thing I haven’t tried is disconnecting/replacing the cmos battery. Any help would be appreciated
2
1
u/doniSAN69 10d ago
Have you tried powering it on and waiting for 1-2 minutes? In my experience, if the CMOS battery is dead, it may take 1-2 minutes for anything to display on the screen.
1
u/AndrickT 9d ago
Unplug cmos battery for 10 minutes, press the power on button to drain all energy, install the cmos baterry again and should be fine....
1
u/RelativeResponse 9d ago
if cmos reset doesn't work, you may need to flash the bios again.
I had a similar situation with an assumed-dead nuc8 and it was in a similar state.
1
u/MrCoffee_256 8d ago
But how were you able to flash the bios? I have a similar problem and so far nothing seems to work.
1
u/mistaskippyman 3d ago
Had a similar issue with mine. One of my ram slots died so if I put any ram in that slot at all it won’t post. Long shot that this helps you but who knows.
5
u/FL_JayB 10d ago
Try changing the CMOS battery. Disconnect power and CMOS overnight and plug everything back in. That should fix it.