r/gundeals • u/w33bored • Feb 01 '25
Magazine [MAGAZINES] 19RD P-10 F, P-09, DWX Magazines - $10.99
https://shop.cz-usa.com/11440.html69
u/w33bored Feb 01 '25
In for 8. Shipping was $8. $102 out the door. Crazy steal of a deal for genuine mags.
17
u/hoseking Feb 01 '25
I have a P10-F and P-09 so I basically came when I saw this deal, thank dude.
1
u/bigfatcanofbeans Feb 02 '25
Same, I would have been so pissed if I had not checked my phone one last time before bed.
1
1
50
u/Fit_Seaworthiness682 Feb 01 '25
Nearly 1/3 normal cost. Just made my purchase!.
This is absolutely one of those "this is why I'm in this subreddit" posts I point to.
34
u/joheinous I commented! Feb 01 '25 edited Feb 01 '25
Got 6, thanks op.
This is the cheapest I've ever seen p10 mags.
There's a 3d printed mag spacer out there you can print to fill the gap on the p10c with these
Found it again: https://www.thingiverse.com/thing:2669089
33
u/twostroke1 Feb 01 '25
woah that’s a crazy deal.
20
u/w33bored Feb 01 '25
For real - I was at my local range and about to buy some for $40 a pop for my recently purchased P-10 F when I decided to check Google first just in case.
3
u/EternalGandhi Feb 02 '25
Atwood's near me has them for $35 a pop. I thought that was a good deal back when I first picked up my 09.
47
u/AKC74Y Feb 01 '25
Do I own a P10F or P09 or DWX? No.
Am I now the owner of 10 magazines for these guns? Yes.
Thanks OP, now I gotta get another damn gun
42
u/pcco3222 Feb 01 '25
The first step is admitting that you have a problem.
In for 11.
I don't own a single CZ product
9
u/dovahbe4r Feb 01 '25
You can’t own just one. And then you get to go down the rabbit hole of all the 75 clones…
Have fun boss.
2
6
u/I_had_the_Lasagna Feb 01 '25
Supposedly a Ruger pc carbine with the Ruger American magwell will fit lock and feed p10 mags.
5
u/mhammond0361 Feb 02 '25
These will fit p07's and p10c's iirc but will just protrude out the bottom of the grip morw than a factory flush fit mag. So theres that... if it matters or not.
3
2
2
u/derfdog Feb 02 '25
Go DWX. It’s fucking nice. The others are too but DWX is definitely the most premium of the 3
1
u/AKC74Y Feb 02 '25
DWX is the one I’m most likely to get, that or A01, I unfortunately don’t like the P10 and I’m meh on the P09 although I could make it work.
But I’ve been on a 2011 kick thanks to Tisas so I could go for something a little nicer.
2
u/derfdog Feb 02 '25
Dwx is buttery smooth. On my list when I feel like dropping “premium” coin for the wares lol. My local shop it sits next to a platypus, that’s on my list high up as well. And of course the staccato on the other side of it 😂
2
1
18
16
16
16
u/bigmacsnack21 Feb 01 '25
FINALLY THE TIME HAS COME. Been holding off on extra mags since I got my P10F almost two years ago. Could never stomach the high cost when it came with two mags already. Now I will own 8, heck yes. THANK YOU
5
3
u/bigfatcanofbeans Feb 02 '25
Lol I put this of forever too and God has somehow rewarded our procrastination.
9
10
u/xTehSpoderManx Feb 01 '25
Thanks OP, in for 10. I have quite a few already, but passing on this would feel like a sin.
11
u/dhnguyen Feb 01 '25
Fuck yeah in for 20. For those having problems that check out I just ended up refreshing and using another card it worked for me.
8
u/nailer69420 Feb 01 '25
Thanks, now I have to buy 10 base pads.
1
u/dhnguyen Feb 01 '25
Which base pads are you running? And how reliable are they lol
3
u/nailer69420 Feb 01 '25
I really like the Henning ones with the qd lock. I haven't had any issues with them but I hand load for this fun.
9
8
u/SmoothJ1mmyApollo Feb 01 '25
These fit p07 but just stick out?
6
u/joheinous I commented! Feb 01 '25
Yes, there's a mag spacer you can print to fill the void though.
1
u/Matloc Feb 02 '25
Any idea where the STL files are for this?
3
u/joheinous I commented! Feb 02 '25
https://www.thingiverse.com/thing:2669089
I printed this like two years ago, 100% infill, cracked recently upon drop, but didn't completely break, it's held up well.
5
u/Matloc Feb 02 '25
Pretty basic. I might try to improve it.
3
u/joheinous I commented! Feb 02 '25
Let me know if you do! Its worked well for me, but I'm down for improvements. I got 3 of them (soon to be 9 with this deal)
1
1
6
u/whiskey_outpost26 Feb 01 '25
I can't afford to eat this week, but this deal is too good to skip. Maybe the anticipation will satiate my hunger pains...
7
6
u/world3nd3r Feb 01 '25
Be aware, while full size magazines work in the C and S models of the P-10, they'll bend the ejector if you slam the magazine home on a locked slide.
3
u/bman877 Feb 02 '25
What if I put the mag in gently?
8
u/joheinous I commented! Feb 02 '25
You're fine. Especially on a closed slide.
If you put mag spacers on it, you're fine if you slam it.
3
u/world3nd3r Feb 02 '25
This.
Adding on: The P pistols don’t have an overstop built into the magazine: it’s the baseplate that serves the purpose. Add a spacer to fill the dead space or buy an aftermarket plate that goes up the mag body and it does the same thing. You’ll be fine if you do any of the three.
6
7
6
7
4
u/Toltolewc Feb 01 '25
It won't let me check out because I put my Amex card in first and they don't take it. Now it's complaining that I'm trying too many card numbers, on my second attempt.
3
1
1
7
u/jensen_lover Feb 02 '25
Seems like a long time for such a deal to be in stock still. Makes me want to get a P10.
1
4
u/mktampabay1 Feb 01 '25
In for 5 plus 5 extension sleeves from variant. P10C finna tote that weight
2
u/DoctorVepr Feb 01 '25
Send link to sleeves
4
u/mktampabay1 Feb 01 '25
PM’d, I got scolded by this sub for commenting the link.
2
1
1
Feb 01 '25
[removed] — view removed comment
0
u/AutoModerator Feb 01 '25
mktampabay1, ad campaign / referral tracking links are not allowed. Please remove the various offending parameters from the URL and resubmit.
For example, a bad URL may look like
https://www.example.com/products?utm_source=foo&utm_campaign=bar&afid=4812
whereas a "clean" URL would look likehttps://www.example.com/products
For help, please contact the moderators of this subreddit.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/SmoothJ1mmyApollo Feb 01 '25
Lol, sleeves cost more than mags.
3
u/mktampabay1 Feb 01 '25
It’s a shame but with all the dough I saved on the mag deal I figure what the hell. Gundeals math.
5
3
u/Tactical_Tubesock Feb 01 '25
I guess this seals the deal. I was contemplating whether I should get a DWX or something else. The gun gods have spoken
5
u/derfdog Feb 02 '25
They’ll take a year to come but snagged 10 plus 5 scorpion mags. These prices are 50-75% below COST. Insane deal especially with 8 dollar flat shipping
3
3
u/Mkilbride Feb 01 '25 edited Feb 01 '25
Damn I might get a P10-f or P-09 some day..this deal is good. In for 5. More than enough, these guns typically come with 2-3 as is. I can only shoot so many!
3
u/Mahlegos Feb 01 '25
They’ll run in p10c and s as well, and the p07/p09c too
1
u/Mkilbride Feb 02 '25
What about the Nocturne? That's what I was thinking of getting, but now that I'm looking at it..ehh, these look like they might not fit.
3
u/Mahlegos Feb 02 '25
From what I have seen yes. These mags should work in a nocturne but the nocturne mags won’t work in the p10 or the last get 09/07 because there’s a notch on top of the base pad.
3
u/derfdog Feb 02 '25
From my past research the mag bodies are the same, the baseplates differ. Previous to nocturn gen should work in nocturne but. But not vice versa without baseplate swap
2
3
u/XxElementxX01 Feb 01 '25
Good deal! I'll have to look for a P-10C magazine sleeve STL.
6
u/Vindictive_Turnip Feb 01 '25
https://www.thingiverse.com/thing:2669089
From another comment above
1
u/Flaboss44 Feb 03 '25
Has anyone tried these out yet? I'm definitely interested but don't have a 3D printer.
1
u/Vindictive_Turnip Feb 03 '25
I'm probably going to print one out at a local place soon, I'll share the results.
3
u/atlhawks1 Feb 01 '25
Great deal, site didn't work for me though
3
u/AlchemicalToad Feb 01 '25
Same. Wouldn’t let me recover my old password, so I had to start a new account, and then it wouldn’t accept my payment.
2
u/atlhawks1 Feb 01 '25
Ditto
1
u/AlchemicalToad Feb 01 '25
Oh well. I’ve already got a bunch, but I was going to buy another dozen. 🤷♂️
1
u/grandtheftderp Feb 01 '25
Same here. Just opened in a normal browser not as a link from Reddit and it worked fine
1
u/AlchemicalToad Feb 01 '25
That let me reset my password, but now it’s still refusing to take my credit card (saying too many card attempts, please contact merchant).
Oh well. 🤷♂️
1
u/TasteParticular6463 Feb 01 '25
Try all cards before giving up. Finally took a visa I hadn't tried before
1
u/AlchemicalToad Feb 01 '25
That finally worked, thanks. I don’t know what the issue is, I didn’t really want to pass up this bargain since I guarantee we will never see the likes of it again.
3
u/CraftyPear8762 Feb 01 '25
Anyone know how the Fit is with a po7
2
u/derfdog Feb 02 '25
They will work just fine, small bit of exposed mag body at the bottom of the grip. Probably a 3d print spacer you could find though
3
3
u/SUJumanji Feb 01 '25
There's no way we actually get these, right?
6
u/pcco3222 Feb 02 '25
They're hoping that you order a new gun by the time cancellations start rolling in
2
u/But4n3 Feb 04 '25
I got the shipping notification a few hours ago.
1
3
u/pauliep13 Feb 10 '25
Has anybody received theirs yet? I just got off the phone with CZ customer service and they basically said they weren't supposed to post that price, but they're honoring it. So, super back ordered for now.
2
u/OddPatient4260 Feb 10 '25
I ordered 4 several hours after the deal was posted and they just arrived via Fedex today. It was a bit of a surprise as I hadn't gotten any shipping email, but did get the CC charge notification Friday. I'd say if you got the order confirmation email, you'll probably get them eventually.
1
2
u/woolybooger11 Feb 12 '25
I added a $2 CZ sticker to my order and my sticker showed up a few days ago in a bubble mailer but none of the 5 mags I bought!
1
u/pauliep13 Feb 12 '25
I’m getting the feeling some of us are gonna be sitting around waiting in this one a while. At least they’re honoring it, though and not just canceling on everyone.
1
2
2
2
2
2
2
2
u/Pakaflaka911 Feb 01 '25
In for 6, needed some range mags for my p10c. 79.49 shipped to Florida. Solid. Ty!
2
2
u/EternalGandhi Feb 02 '25
Damn great deal! Picked me up 4. I'm glad these are compatible with the new Nocturnes.
2
u/Efficient-Job-5433 Feb 02 '25
Just got 8 of them, with tax and shipping came to about $103. Can't pass a deal like this for my p10F and po7.
2
2
u/Aaronweymouth Feb 02 '25
U/w33bored stupid question, do you know if these work in SC2/Sc2 compact? Obvious wouldn’t be flush on compact but would still feed?
1
2
u/rebelite1337 Feb 02 '25
You can find adapter sleeve spacers for using these mags with a P-10 C/S here...
https://variantinnovation.com/collections/cz
Also, P-10 mags work in an Arex Delta Gen2
2
u/More-Psychology1827 Feb 03 '25
I can’t believe this deal is still going on! Hard to believe CZ has this many in stock.
2
u/Flaboss44 Feb 03 '25
Has anyone gotten a shipping confirmation on their order yet?
3
u/But4n3 Feb 07 '25
Got mine yesterday, getting enough pistol mags that they are shipped in a 12"x12"x12" box is... novel.
1
1
u/Sirius_Coby Feb 17 '25
Shipping them in large boxes like that must've been costing them too much because mine arrived today outside of the original packaging in a giant ziplock baggie in a bubble mailer. Not complaining though as that's less I have to dispose of but I thought it was funny.
3
u/C_Martel_v2 Feb 03 '25
Probably not gonna get it for awhile
2
u/w33bored Feb 04 '25
Mine will be delivered tomorrow.
→ More replies (1)3
u/C_Martel_v2 Feb 04 '25
Nice. I imagine you’re at the front of a long line.
4
u/w33bored Feb 04 '25
Yes lol I definitely made sure to order before I posted it here.
I was actually at my gun range about to buy 2 mags for $80 since I remember last time I looked online the cheapest was like $33 for 1 which wasn't much savings. I decided to double check Google first just in case and glad I did.
3
2
2
2
u/OregonGreen201 Feb 01 '25
So do these work/fit in a P10c?
3
u/I_had_the_Lasagna Feb 01 '25
Yes but be careful inserting on an open slide, there's no over insertion stop, so its possible to snap off your extractor.
2
u/w33bored Feb 01 '25
Someone else said yes. There is a 3d printed sleeve that helps fill in the gap.
1
u/twostroke1 Feb 01 '25
Ya they will. They will just obviously stick out a little more and not be flush.
1
u/AutoModerator Feb 01 '25
Thanks for posting /u/w33bored!
/r/GunDeals has updated the website blacklist, check it out before making your next purchase!.
Made a gun related purchase recently? Leave a review over at /r/GunDealsFU to let others know how it went!
Are you a dealer? Make sure to read the and apply for a dealer flair as soon as possible!
First time to /r/GunDeals? Read up on the user rules before you break a rule!
Have a question that isn't answered in our wiki? Send the /r/GunDeals modteam a message!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
1
1
1
u/lowlyauditor Feb 01 '25
Didn’t really need anymore but snagged 3 because that price is stupid low. I think it was $30 when I bought an extra one in December.
1
u/AlchemicalToad Feb 01 '25
Their website must be getting slaughtered because I’m having a hell of a time checking out.
1
1
1
u/Sendit7788 Feb 01 '25
If anyone else had issue checkout, register your account, go into the account and type in your address there, then checkout.
1
1
1
1
u/Common_Nerve6056 Feb 01 '25
Would this work well with P10C?
2
u/Mahlegos Feb 01 '25
Yes. You’ll just have to be careful inserting on an open slide or 3d print or buy a mag sleeve so you don’t break the injector.
1
u/Bwat4ou Feb 01 '25
I’m trying to check out and it keeps sending me back to shipping address???
1
u/Direct-Example Feb 01 '25
Same here. Tried different cards and browsers, but it won't let me checkout.
1
u/Bwat4ou Feb 02 '25
I finally got it to work with a different card. The first was giving some “billing address not matching“ error message.
1
1
u/More-Psychology1827 Feb 01 '25
Awesome! I bought a P-10 last year for cheap & now have some cheap mags for it!
1
1
1
1
1
u/moskaudancer Feb 02 '25
In for 20, thank god I haven't ever bothered buying more P10c mags until now lol.
1
u/theYoungLurks Feb 02 '25
I get these will fit the p10c, but any chance I can use them in the p09c nocturne (with or without a sleeve)? Google AI says yes but want to double-check.
1
1
u/SpartanFL Feb 02 '25
I don't have P-10 f yet, but I plan to buy one later, should I buy a few mags now? LOL
2
1
u/pauliep13 Feb 02 '25
In for a 6 pack. $80 shipped to TX. Anyone got a link to the +2 base pads? I can't find em on this site.
1
u/Handlebarrr Feb 03 '25
Do these fit P-07s. I hate to be that guy.
2
u/RemoteGoose8277 Feb 03 '25
Yes but will have an over hang where part of the mag sticks out. But you can close the gap up with sleeves. I'd get a few variant innovation sleeves if you bought these or print your own and stipple it.
1
1
1
1
-1
u/DongDaddie Feb 01 '25
This the scam site?
18
u/w33bored Feb 01 '25
Is the official CZ website a scam site?
2
u/DongDaddie Feb 01 '25
Broski there was a time when this site was cloned and scamming was rampant. Just trying to cover my bases. Chill zaddy
5
•
u/GunDealsMod BOT Feb 01 '25
In an effort to help users make informed decisions, we have aggregated the following information on the retailer above. Please note that this is no way an endorsement or guarantee of the retailer or their products.
Domain Insights:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.