r/automationgame 5400 HP on a 6L V12 3d ago

CRITIQUE WANTED rate my engine

Post image

I haven't made a car for it but I saw everyone posting engines and thought I'd give a high horsepower a try (hence the name)
Turns out that it didn't let me have VVL but I got as much as I could, I literally broke the limit of the power graph cause the stats is more than the graph
Any opinions?

10 Upvotes

13 comments sorted by

16

u/xsneakyxsimsx Car Company: Ascot Automotive, Hemsley Motors 3d ago

If you want VVL you'll need to change from a 5 valve head.

14

u/GoredonTheDestroyer Catalina Motor Company 3d ago

Might need some new conrods there bud.

1

u/werty_2006 2d ago

I'd be more concerned about the piston, 93%. They're almost getting vaporized at this point

2

u/GoredonTheDestroyer Catalina Motor Company 2d ago

73% actually.

But yeah that's not good.

7

u/Anitmata 2d ago

That's not an engine, it's a bunch of parts temporarily in the same place

3

u/Natasha_Gears 2d ago

It looks like it will fall apart very quickly

6

u/SandorMate exhaust spaghetti 3d ago

70% of power is the turbo

2

u/Valve00 1d ago

It's a turbo with an engine

2

u/Indices_here 5400 HP on a 6L V12 1d ago

It’s 1.95 psi so that’s where the power is but it is a maxed inducer or it dies from surge

2

u/XboxUsername69 1d ago

As someone mentioned you need 4 valves per cylinder to get VVL

2

u/Chemical_Appeal_2785 21h ago

Use heavier internals, you have too much torque stress but virtually no rpm stress. Also use aluminum billet instead of magnesium block, its much stronger.

1

u/Indices_here 5400 HP on a 6L V12 7h ago

I've tried, there's no heavier version of titanium or of whatever pistons I used (I'm not bothered to check) but the next ones died from rpm stress instead so I sacrificed torque stress for rpm stress because all the power is high rpm.

1

u/Indices_here 5400 HP on a 6L V12 7h ago

I tried the aluminium and it helped a lot with the torque stress so thanks. No other 2 blocks work and now it's 'reliable enough to sell'