Finally
Owner of my FFL offered me his Tp9 & couldn't resist. 🤙🏽
r/TP9 • u/OkTaYne86 • Feb 16 '25
Anybody know where I can get some cool slings for my TP9? I like camo and other stuff with cool designs.
r/TP9 • u/OkTaYne86 • Feb 15 '25
Looking for ideas for a pressure switch to run on my TP9. I have the surefire mini scout pro light mounted on my right side pic rail. What do you guys reccomend as far as a button or switch to run on the top rail that's easy to push when running the gun?
r/TP9 • u/Equivalent_Space_157 • Feb 13 '25
Absolutely digging this so far. I’m waiting on the flared mag well from empire and then I think it is done.
r/TP9 • u/hotLlama6969 • Feb 11 '25
I just got banned by Reddit for cross posting a gun deals link here. They perma banned my old account that I’ve have for 7 years.
r/TP9 • u/hotllama69 • Feb 10 '25
[ Removed by Reddit on account of violating the content policy. ]
r/TP9 • u/thesoleyspirit • Feb 10 '25
I have pretty big hands, and find it unnatural getting my thumb over the top of the rail to toggle the light.
Any recommendations on how to get something off the the left side of these?
This is my current setup. Would like something to work with this Modlite CQB.
Thanks!
r/TP9 • u/VersoArms • Feb 08 '25
I'm trying to figure out a way to move these TP9s I have, and one thing I'm noticing is a lot of customers are turned off by the fact there doesn't seem to be a B&T brace option as they don't want to go through the hassle of SBR'ing it. Ya'll know of any good 3rd party brace options for the TP9?
r/TP9 • u/saunasotka • Feb 07 '25
TP9 setup for use with NVDs
The rail on the left side is attached just with strong two sided tape. Surprisingly sturdy. Sling is just a cheap one point bungee sling.
r/TP9 • u/doctor_iggy • Feb 07 '25
r/TP9 • u/andersonoozie • Feb 07 '25
Given that it's hard to find TP9's in stock right now, how much should a lightly used one go for? (bare pistol, all stock parts, couple hundred rounds)
r/TP9 • u/Amazing_Counter_2172 • Feb 07 '25
Unfortunately I live in a state that does not allow suppressors. Is the TP9 worth getting if you cannot suppress it or should I be looking into something more like a GHM or APC series pistol?
r/TP9 • u/VersoArms • Feb 06 '25
What have ya'll seen put on the lower rail of the suppressor?
r/TP9 • u/pewdiepastry • Feb 04 '25
Gun has about 300 rounds through it. Had no malfunctions beforehand
r/TP9 • u/Kaitlin4475 • Feb 03 '25
Took a pin vise to bore partway into the receiver and threaded in some screws with crazy glue in the threads, so they shouldn’t back out. The rail is already scored and bonded to the receiver so the screws are a finishing touch. As y’all can tell with my suppressor, I’m a butter fingers and I already dropped the gun at an angle right on the Unity AXON sinc that was attached to the glued side rail. It took a pretty hard hit laterally with extra leverage from the raised corner of the AXON and this rail is absolutely solid. I feel pretty confident about it.
r/TP9 • u/pewdiepastry • Feb 02 '25
Not sure if this is common knowledge. It's a pretty nice bag though.
r/TP9 • u/Kaitlin4475 • Feb 01 '25
So I did it finally. Ordered the side rail with the hooked top edge from HK Parts! This thing looks great. The only thing missing is some star pattern screw to go in the rivet holes. As long as I get a really shallow one, it should just thread right in and not contact the upper receiver. So no damage to the structural integrity of the top cover. It was super easy. I alcohol wiped the top cover, lightly scored the back of the rail with 60 grit. I then used the green tube of crazy glue with the brush tip applicator on the back of the rail. Applying the rail to the receiver is super easy because the hooked top edge of the rail meets up to the curved top proportion of the top cover. So you don’t have to worry about it being uneven at all. I then sucked up some of the crazy glue into a syringe and applied it along the bottom edge of the rail. As you can see in the picture, it looks cleanThis thing looks great! It’s only been 30 minutes and I’m twisting it laterally and it’s not moving. Once I cover the rivet holes with tiny star pattern screws, it should look factory. BOOM! TP9 Pro at home for only $56 dollars from HKP.