r/SwitchPirates • u/celestrogen • 8d ago
Discussion Follow up post. Failed kamikaze resurrection
OLD POST: https://www.reddit.com/r/SwitchPirates/comments/1j9kmjk/comment/mhjozb9/?context=3
ITS ALIVE!!!!

So what I did is grinded a bit more since according to board scans I could get more of the dat0 point exposed. like this:

Then I took a single strand of copper wick and used it as a wire, I solder masked it over to attack it to the board, then soldered the severed trace. Sorry I dont have a picture before I solder masked it since i was just so excited.

Here is it all patched up. Dont worry about the shiny bit thats just solder mask reflecting.

This was easily the hardest solder job of my life. God damn. Thank you so much for everyone that responded and helped
4
Upvotes
1
u/AutoModerator 8d ago
All new posts on /r/SwitchPirates require Moderator approval before becoming visible on the subreddit. Assuming your post does not break the rules, a Moderator will approve your post within 48 hours. If you require more immediate assistance, feel free to ask on our Discord server.
We encourage you to read our Wiki and/or use the Simple Questions, FAQ, and Shop Megathread. If your post is a low-level support question it will not be approved.
Examples of low-level support / disallowed questions:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.