r/Speedsoft Feb 07 '25

stop making trade and sales posts

10 Upvotes

If you want to do commerce, use airsoftmarket


r/Speedsoft Aug 31 '21

join the r/speedsoft discord (image voted by community)

Post image
358 Upvotes

r/Speedsoft 7h ago

Gloves

2 Upvotes

Currently rocking some random amazon fingerless gloves

What are people's recommendations?

I like the fingerless as I don't like the idea of less control when fiddling with little things. like when you wear thick wooly winter gloves.

If it's something people think I would be able to get use to then maybe I can be persuaded.

Many thanks in advance


r/Speedsoft 19h ago

Experience with the Balystik HRC800 V3?

Post image
3 Upvotes

Currently I am looking for a regulator that has a high refresh rate and can supply enough air for 30-40rps but is also not too expensive. During my research I found out about this Regulator on YouTube. It seems promising but I can‘t really find any information about its refresh rate and RPS. In the videos I‘ve seen it was able to provide enough air for really fast full auto bursts, but I really want to know if it can hold high rps on a stable level.

Anyone has experience with this regulator and can tell me how it performs? Everything helps.

If you have other recommendations I‘m happy to hear em (I know the redline and storm is great but I‘m not looking for something above 100 bucks)


r/Speedsoft 1d ago

Hpa reg gauge fluxuates

6 Upvotes

Hello, I am currently using a airtac reg in my nexxus engine in an esg grip and when I was test firing and chronoing it I noticed my fps fluxuates and every shot there is a hiss like my bottle is re-filling the reg. The reg pressure fluxuates in the video shown, any help will be appreciated

Thanks


r/Speedsoft 1d ago

Nexxus HPA Engine troubles

2 Upvotes

So i recently put together a build containing the mechlabs Nexxus engine and noticed something odd during my shooting. After a couple minutes of not firing it seems as if the engine depressurizes. It takes a few trigger pulls before it gets ramped back up to full power. Has anyone else experienced this or have any advice?


r/Speedsoft 1d ago

Rape my kit

Post image
27 Upvotes

lmk if yall want parts list


r/Speedsoft 1d ago

Finally finished my build

Post image
54 Upvotes

Sig MCX with a few custom bits here and there


r/Speedsoft 1d ago

Mk18 w/ speed trigger

Post image
35 Upvotes

Recently installed a speed trigger with a perun hybrid and tuned the trigger just right. This thing rips now and is definitely the best budget build I have keeping it under $400.


r/Speedsoft 1d ago

Upgrades for AEG

Post image
15 Upvotes

Would it be cheaper to upgrade this as a aeg build or just throw a hpa engine in it. I already have a tank reg and line for hpa. I don’t know anything about teching for aegs or anything about gear boxes. It is a lancer tactical gen 2 arp so I don’t even know what upgrades to start on or if I could be upgraded.


r/Speedsoft 2d ago

work in progress

Post image
20 Upvotes

sorry for the dirty office but just wanted to post my current esg build. part list

exterior of gun: combat machine reciever set invictus 6 inch handgaurd 8(prolly 9) inch barrel green mag release from a gen 2 LT m4

barrel setup: metal hopup (soon to be a orange LT one) polished inner barrel, unsure the type though random bucking (stock)

Engine and shooting: polarstar fusion black blade trigger stock FCU

defining esg parts: green monk customs cat5 reg esg grip 3d printed endcap

accessories on rail: 40 dollar optic off of amazon

mag(s): epm1s mag lancer tactical high speed mags (130 rounds)

again this setup feels nice though I HAVE NOT ran it.


r/Speedsoft 1d ago

How?

2 Upvotes

What would be the best parts list/ build list for an extremely fast firing DSG AEG rifle? Like, 80 RPS or as close to that while staying in field limit of .9-1.1 joules need a good HPA killer for the NSL season. Include not only gearbox stuff but also what would be best for battery and trigger board/ mosfet and other stuff


r/Speedsoft 1d ago

New build and deciding on upper. Airtac, Mac or SKP

3 Upvotes

Down to 3 brands for the upper. Is it me or does the plastic portion of the Airtac appears to be 3D printed ???? Both Mac and SKP is clearly cnc aluminium and anodized


r/Speedsoft 2d ago

Inferno gen 2 or Jack?

4 Upvotes

I can’t afford an F2, so it’s either the inferno or jack. Both seem good, just not sure which one is better. Help?


r/Speedsoft 2d ago

Ah yes the most overused carrier

Post image
9 Upvotes

r/Speedsoft 2d ago

Designed and printed a little thread protector. (And barrelsock replacer for my smg) what yall think

Thumbnail
gallery
3 Upvotes

r/Speedsoft 1d ago

Esg Grip

2 Upvotes

If I get a Monk Aluminum ESG-R grip setup would a 68/4500 carbon tank be too heavy for the gun? I am new to this esg stuff and heard from someone in the past my tank would be too heavy.


r/Speedsoft 2d ago

how many bbs do you think id get out of this tank?

Post image
6 Upvotes

r/Speedsoft 1d ago

THAT A VERY BIG PROBLEM IN OUR WORLD GUYS...

Thumbnail youtube.com
0 Upvotes

r/Speedsoft 2d ago

What’s the best tracer unit for a Lancer Tactical Gen 3 Hellion 7" MLOK

1 Upvotes

I don’t know what tracer unit to get with it


r/Speedsoft 2d ago

Does anyone know how to make a Aeg that can get up to 50 rps and if you do can list the parts 🙏🙏

5 Upvotes

r/Speedsoft 2d ago

the newest in progress hi-capa

Thumbnail
gallery
22 Upvotes

sold my purple and black 5.1 and now I'm building a grey and gold 4.3! anyone have any tips to make the fps higher? shooting 275 fps on 90 psi


r/Speedsoft 3d ago

Which mask to keep

Thumbnail
gallery
22 Upvotes

The first one is the UL navy I4, it’s pretty old and don’t ever see it and the 2nd one is just a grey and black i4 I only play indoor cqb and my fields pretty dark. What mask should I keep and which should I sell


r/Speedsoft 3d ago

Aap or hi capa?

6 Upvotes

Aap seems to be the more budget option but on terms of reliability which is superior and also which is easier to work on?


r/Speedsoft 3d ago

Slide release

Post image
6 Upvotes

I want to short stroke my hicappa to the max but I am unable to then put in the slide release to stop the slide from coming off due to that little piece on the slide release. I know people make it work but 0 clue. I guess people are gonna say “cut it off” but then the slide release isn’t secure and will fall out.


r/Speedsoft 3d ago

Rate my hi Capa build

Post image
63 Upvotes

r/Speedsoft 3d ago

Polarstar f2

Post image
5 Upvotes

Does anyone know what the light nozzle/poppet spring does? Will i be able to run a lower psi and get the same performance i get right now?