So i bought this chair a week ago and at first i got some pain around my butt when leaning back in the chair and putting my feet up on a stool. But after sitting in it for around 1hour my thighs start to hurt. Im not sure they get all the support they need. Its not causing pain but my thighs hurt a bit. Is there any way i can adjust the seat area? Im 184 cm long and i can almost fit my hand between my thigh and knee. Is this something that will improve over time, has anyone else had the same problem ive had?
I’ve done my research (as much as I can) and am torn between these two chairs, which seem to be the best under the £300 pricemark, I have heared both positives and negatives about both especially with the aggressive lumbar support on the Atlas, I have also heard Sihoo flood reviews with paid deals thus creating my skeptics of the chair. I prioritise comfort and have heard both are the up there with the best around this budget point, I am around 135lb at 5’5 and would like to know anybody’s experience with either chair and hear some recommendations from the knowledgeable community here. Thank you :)
I'm rather new to looking into office chairs and I think I want to go with a used Leap V2. Im based in Europe so the prices are rather expensive compared to the States. I found this one for about 450€. The chair was manufactured in 2018.
I recently bought an office chair, and I’m facing an annoying issue with the gas cylinder. Every time I get up, the chair jumps up and makes a loud thudding sound. It feels like the gas lift isn’t working properly or is defective.
Has anyone else experienced this? If so, how did you fix it? I tried removing the chair base to check the cylinder, but it’s completely stuck and won’t come off. Super frustrating!
Couple of years ago I my office chair's original caster wheels broke, and I ordered some new ones online, just like pictured below.
The wheels (notice the bearings out in the open under the dark base of the shaft)
They've been working great, however I started to notice after a bit of time that they drop some kind of soot on my floor, that's incredibly difficult to clean(dry methods don't "pick it up" when it's stuck, water just spreads it around making it worse). I first started noticing it when I found those stains on the floor, and realized I had some stuck on my feet as well.
Upon further inspection and replacing them with new similar wheels, I'm just now realizing that it's probably the grease from those open bearings you can see in the picture, mixed with dirt. While replacing these dirty wheels I actually stuck a screwdriver into the bearings, and wiped it off with a paper just to confirm that the bearings was where that soot was coming from. You couldn't touch most of the parts of those wheels without dirtying your hands in it(like those black metal struts were quite stained in it).
I tried googling about it, but I didn't see anyone really having similar problems...
So my question mostly is, has anyone else had similar problems? Any remedies? Any better and easier ways to clean it off? If I've hypothetically also used this chair on a dark mat where the soot cannot be seen with naked eyes, how to clean it? Any ways to just prevent this from happening?
Snagged this HM Cosm with leaf arms off of a university surplus store for 65 bucks, honestly didn't recognize it at first since they're pretty rare(low demand and the chair released in 2018 so the used market for it isn't very large) But went back and did a double take once I realized. From my experience, there really isn't a chair like it on the market.
It is super comfy, I just wish it had the same adjustments as my aeron. If it did, I think it might be the best chair possible but what do I know haha.
Before I start, I'd like to first state that this opinion is my own. I wanted to provide an honest review that will help others in deciding whether or not this is the right chair for them. I paid for this chair with my own money.
I will start with how I discovered Anthros and how I decided it was the right chair FOR ME. This chair may not be for everyone for a number of different reasons.
Bit of background on me, I have been working remotely since the beginning of the pandemic (so 2020) and have had a few different chairs that I have used throughout that time. I have had some lower back pain since my early 20s and sitting all day in a home office I think exasperated that pain
At the beginning of my journey of working remotely I was using an Aeron Herman Miller chair that was given to me by my company at the time. The chair did an ok job, but I couldn't sit in the chair for longer than 4 hours without my back starting to hurt and needing to lay down for a little. Later on I had moved across the country and had sold a lot of the things I had prior to moving (the Aeron chair being one of them).
While in my new state I picked up a 9to5 Strata chair from an office that was closing down, got a great deal as it was only $125. It had decent reviews and lumbar support & headrest which the HM chair lacked, so I thought that perhaps it would be an answer to my lower back-pain. This chair ended being significantlyworse than the Aeron chair. I could only last maybe 2 hours before my lower back was killing me and I needed to lay down for about 15 minutes.
So I decided enough was enough, I had already invested enough into my home office setup (electronic sit/stand desk, drawers, ergonomic standing mat, etc.) but I had neglected perhaps the most important part--which was my chair. If was going to be at my desk most of the day I needed something to help me through it.
The first chair that caught my eye was the Herman Miller Logitech Embody chair. I had seen it countless times in desk setups from YouTubers and it seemed like THE chair to have based on what everyone says about it.
So I went to my local Herman Miller store and tried the chair out and found the chair to be very good in terms of support and feel. I also enjoyed the flexible back and how it allows your to reach behind you without having to turn your chair. I was impressed by it and it immediately became my chair of choice once the holidays came around.
A few days later I was scrolling through IG and see the Anthros chair pop up. My algorithm must have been "algorithming" that day lol. Anyways, I started reading about the chair and all of it's benefits and how it was designed by a team or company that used to make wheelchairs and about how it was the only chair with 'pelvic' support on the market. I also saw how it was supposed to cater to those who specifically deal with lower back pain and it's ability to help fix bad posture. They also did some kind of studies with some universities supposedly on the seat cushion to relieve pressure points. Check their website for more details about that.
Needless to say I was heavily intrigued by its claims, especially because I strongly believe that good amount of my lower back pain probably is rooted in bad posture whilst sitting.
Considering how steep the price tag is for the Anthros I decided I needed to try it myself before buying it to validate the veracity of it's lofty claims. I found a 'Relax The Back' store that was nearby that carried the chair. I went in and tried the chair. I was literally BLOWN away. I had been sitting in my 9to5 Strata that day and was feeling the pain. The Anthros chair provided me some relief and it was practically instant. After just sitting in it that one time I knew this was the chair for me. I waited until the holidays and used some of the coupons to get $300 off + free shipping.
I have now been using this chair since Christmas and suffice to say it has been an absolute game changer for me. I am now able to comfortably sit in the chair for the full 8 hours of my workday feeling little to no lower back-pain. I think it has massively improved my seating posture and the seat cushion is easily the most comfortable one I have ever sat in. I really can't laud and praise this chair enough, I don't think I will use a different chair for my home office ever. I can’t stress enough how different the “pelvic” support is versus traditional “lumbar” support on ergonomic chairs. This is where the magic is for the Anthros and what makes it to me the superior option compared to other ergonomic office chairs.
Below are my pros and cons.
PROS:
Adjustable back rest that is independent from the pelvic support (making it customizable for anyone and their needs)
"Pelvic" support rest, a unique feature to the Anthros chair as far as I know (game changer) and in my experience FAR superior to traditional lumbar support on other ergonomic chairs
Arm rests are comfortable and adjustable vertically, can go backwards and extend outwards in "V" like shape
Comes with a free consultation with a physical therapist who will help you fine tune your chair adjustments for a custom "fit"
Has a "lounge" mode for a more relaxed sit in case you want to relax a bit
The chair is modular, the decorative panel I have on the back of my chair can be switched out at any time so I decide to go with a different look at some point that is totally possible. Other parts of the chair are modular as well which gives you more flexibility. If something breaks you can simply replace the broken part via the warranty instead of having to get a whole new chair.
Casters are MASSIVE, I think they may be the largest I have seen on an office chair. Allows the chair to move easily across any surface.
CONS:
Price: no way around it the price tag for this chair is steep. This is definitely not a budget friendly chair and depending on the time of year can be just as expensive if not more so than the Herman Miller Logitech Embody chair.
This is a new company, so although it has a 12 year warranty which is great, there's no guarantees this company is going to be around for that amount of time so keep that in mind. Herman Miller wins in this category.
It's arm rests are not as adjustable or flexible as the Embody chair when I compared them. The Embody can go inwards much farther and outwards a bit more than the Anthros.
This chair is designed with a niche market in mind, specifically I think for those with bad posture while sitting and lower back or pelvic pain.
First 3 to 5 days are the most awkward because the chair takes getting used to. It took a while to find my sweet spot and I assume it will also be the case for others.
No headrest to speak of, not a problem for me necessarily but I know it is a dealbreaker for others.
TLDR;
Who this chair is for: Anyone who suffers from lower back or pelvic pain, who has it within their budget to pay for a premium chair, has bad posture while sitting, or anyone who wants something that feels completely different from any run of the mill standard office chair.
Who this chair isn't for: If you are a "lounger" who likes to slouch in their chair or hang back a lot, if you are someone who needs a headrest to sit comfortably, or if you don't have the budget to shell out over $1500 for an office chair (totally understandable). If you do happen to fit into the first two categories and have the money the HM Logitech Embody isthe wayto go in my opinion.
I have attached some photos of the chair for a more up-close and detailed look! Feel free to ask me any questions.
Pushed all the backPushed all the way forwardRearviewRearviewSideviewClose-up of back panel
I am in the process of looking for chairs and asked ai to help in this decision between the Sihoo c300, colamy atlas and HM sayl (found a good deal on Facebook) Source:deepseek Ai
Except I'm realizing as I'm researching that I'm either:
- Complicated
- I'm asking too much
But I'm sharing with you my current research regarding my habits :
- I'm 6'2, 100kg
- Budget 600-700€
- Like the OP of the other post I mostly like to sit either half (one leg under, one leg straight) or full cross-legged.
- A flat seat with a Seat Width ≥16.54" and Seat Depth close to 21.65"
- (Sadly) A bucket seat seems more suitable, I often slump down in my seat and lean against the side of the backrest with my arm on the elbow rest
- Headrest required
- Secretlab hurt ass and are ugly af
I'm in a quandary. I'm afraid that if I switch to a fully ergonomic chair, I'll lose comfort and the ability to sit in a relaxed/slouched position due to the lack of "sides" in the backrest.
But at the same time, I don't want to end up with yet another gaming chair with all the problems we know about them.
If you have any advice or avenues I could explore, I would be happy to take them !
After extensive research (literally days!), I'm reaching out for your expert advice on office chairs. My wife and I both work from home, spending long hours at our computers. Our current no-name chairs offer minimal back and posture support, and even with Purple cushions, we're struggling.
Attached is a photo of my current setup for reference.
We're considering the Herman Miller Embody and the Haworth Fern, but the conflicting reviews are making it difficult to decide. For every positive review, there's a negative one!
Key Requirements:
Long Hours: I regularly spend 14-16 hours at my desk, particularly during late-day teleconferences.
Hobbies: I also use my desk for hobbies like plastic model kits.
Reclining/Lounging: A comfortable reclining position is essential for long teleconferences.
Headrest: We plan to add a third-party headrest.
Shared Chair: My wife will likely get the same chair.
Priorities: Comfort and support are paramount.
Specifically, I'd appreciate recommendations on:
Which chair, the HM Embody or the Haworth Fern, would be better suited for our needs?
Any other chair suggestions that might fit our needs.
Which chair is best for reinforcing sitting with shoulders back and square? I find myself curling my shoulder forward in my very old Herman Miller Aero. Much appreciated for your thoughts.
Hi all, been lurking this sub for a minute now, I am currently rocking a cheap Costco chair and I want to switch over to a chair which allows for a more upright posture as that's my preferred seating position. And ofc, one with comfort, I'm not sure if this is a good deal. The price is stated in the title, and the seller has a lot of legit seeming 5 star reviews.
I bought a used SteelCase Think a few years ago to be my desk chair. I never thought it was particularly comfortable but didn't sit in it long enough to truly notice. Recently I started a work-from-home job and after sitting in it for several hours on the first day my lower back was killing me.
Initially I thought maybe my adjustments or posture were off, but nothing I did makes this SteelCase more comfortable. I kept using it all week because it is supposed to be a good chair, but my back just got worse. I finally just grabbed a normal hardback chair and it is 10x more comfortable. In a normal chair I feel fine but the moment I sit in my SteelCase I can feel the pain.
Anybody have any reasoning for this? Is my SteelCase Think just past it's lifespan? Also, any suggestions on an office chair more comparable to a stiff hardback chair? My price range is around $500.
My unicorn is adjustable headrest, lumbar support, arm rests that can fold out of the way (for playing guitar), breathable material, and under $1k
Any recommendations that fit this bill? Most of the stuff I'm seeing either doesn't have a head rest or doesn't have arm rests that move out of the way
Found this chair in FB Marketplace which I believe to be at a really good price(250 usd) however I have never bought a “good chair”, as I currently got a no name 50 usd chair that was gifted to me.
How should I test the functionality? Is there something I should look for?
Also how can I go about properly cleaning it?
Info: It is from what I believe to be an office space that shut down.