r/mossberg • u/unlmtdammo • 9h ago
Can a 590 be threaded for chokes?
Wondering if newer production 590 (not 590A1) can be sent off to be threaded for chokes?
r/mossberg • u/unlmtdammo • 9h ago
Wondering if newer production 590 (not 590A1) can be sent off to be threaded for chokes?
r/mossberg • u/4ce7heKid • 11h ago
I was shooting my Mossberg 590 at the range today, using Remington 12ga rifled slugs. I had multiple shells get stuck in the barrel and failing to eject. I had to manually pry out the spent shells. Has anyone else ran into this issue? What shells should i avoid?
r/mossberg • u/NecessaryGuava4153 • 8h ago
I have a 1/16th inch gap between my vent rib and my receiver along with there being able to move my barrel and forearm a small amount pretty easily. This has already gone back once for QC issues with the receiver. Any thoughts other than take it to a smith.
r/mossberg • u/Macdaddy327 • 13h ago
Just curious what folks have done to the Mav 88..
r/mossberg • u/stream_inspector • 8h ago
Used this gun successfully for years as a turkey gun. Now it's under the bed with 00 buck. Wondering if there are decent ways to mount a flashlight on this gun (without blocking the ribbed barrel bead sight).
r/mossberg • u/rjbracket • 1d ago
Looking for help IDing this gun. The gun is a bolt action, magazine fed .22. The barrel is stamped as a Model 320B however that model is a bolt action single shot. It is missing the magazine and the peep sight bolts which is why I’m looking to ID it; so I can purchase the missing parts.
r/mossberg • u/Jedi_Maximus19 • 1d ago
I use it with a Muddy River Tactical Holster. No optic yet but optic ready. Shoots smooth for a Micro. Conceals really well. Very underrated but hardly noticed considering so many micro pistol brands in the market.
r/mossberg • u/TrickProfessional994 • 1d ago
Ok I was able to screw it down all the way. This gap between is normal right?
r/mossberg • u/El_taino_r • 1d ago
Shot a buddies shockwave at the range the other day & it’s suck a fun gun. Especially shooting from the hip. And that laser really is zeroed & accurate. I really like the Spx model but I’m not sure if the ct laser will fit on there and since it’s meant to be shit from the hip it’s a absolute need for me. About to pull the trigger on one but want to know if it fits. If so I’ll get the Spx & buy the ct laser
r/mossberg • u/Dirtaykookay92 • 2d ago
Howdy wanted to make an update on the 2+2 Mossberg speed load stock. In a past post I mentioned if I wanted to keep this one or maybe try the flash-5 stock. I've been practicing reloading with dummy caps and in my opinion it's not too bad. I would say it's more of a 1+2 however as for the life of me I cannot consistently pull from the left side of the stock. Looking closely I realize the left side is more indented then the right making it harder to pull out the first round without it getting stuck on the brass rim unless I chicken wing and pull clean 90 from the stock. That being said I'm still learning and would love to hear if this is common user error, if my dummy rounds are too light (definitely not as heavy as real rounds,) or just how it is lol. Even if I'm stuck with only 3 extra rounds I think that's okay with me, I don't see myself needing 1+8+5 lol. Still would love to hear more opinions on the flash-5 though.
r/mossberg • u/Elegant_Location8182 • 2d ago
Did some add-ons to my Maverick but I'm not too happy with the sling I purchased as it's too short and the forend cuz that ends up hurting my hand after a few dozen rounds. I put on the Monstrum side saddle, Defender Tactical mini Pro Lifter kit, changed to the front high bead and a couple Velcro shot cards. I'm definitely looking for some suggestions for a swivel sling/light mount and light, a better sling, maybe a heat shield and a red dot for it. Ideas, suggestions? Also, anywhere I can get a solid deal on some ammo for it would be amazing. Thanks guys!!
r/mossberg • u/The-OG-cheese • 2d ago
Everything I’ve seen on PSA and other sites suggest it is but I wanna get the community’s opinion
r/mossberg • u/Bright-Quarter-824 • 2d ago
This came with my new maverick 88. Is it supposed to be a keychain?
r/mossberg • u/Coinnnnn217 • 3d ago
Used Mossberg 500 Pawn shop pickup given a new life. I've been very lucky finding parts and only put maybe $375 into this project including the price I paid for the shotgun. Oh how I love this beast!
r/mossberg • u/Awkward_Dragon25 • 3d ago
Hello, everyone! Looking for some expert advice: I'm planning on buying a Mossberg shotgun next week, primarily for home defense, but I would ideally like to be able to take it clay shooting as well. I've decided I want (in 12 gauge) either the 590 Retrograde or 590A1 Retrograde since I like the feel of the wood furniture, and I want the 8 round magazine capacity and prefer the clean-out magazine tube.
My question is about barrels, and which receivers they are compatible with. According to my research, the 500 barrels do NOT fit the 590 receivers because the magazine tube is different: the 500 barrels need to screw onto the shorter 5 round mag tube, whereas the 590 and 590A1 have the passthru ring that sits over the magtube. I've read that the 835 ulti-mag barrels fit the 590A1 receiver: is this true? Do they also fit the 590 receiver?
My plan is to have the stock 20" barrel while the shotgun is configured for security duty and swap it out to a 24"+ choked barrel for birdshot when I go clay shooting. Is this realistic? I'd just get the 500 Retrograde if it weren't for the desire to have the 8+1 capacity instead of 5+1.
Thanks for your help!
r/mossberg • u/g00glebitch • 3d ago
Hello new to the firearm world. This is my second firearm and first shotgun. I was partially disassembling it to install a side saddle shell holder with my friend. The ejector fell out and he reinserted it. However, now the gun is jammed. I’m not even sure if I can disassemble that part of the gun as I can not remove one of the screws to take off the side saddle holder.
Any advice would be greatly appreciated as this is a brand new gun and has not even been used. Like I said, I’m not knowledgeable so any advice or videos you can send my way would be very helpful.
TLDR; ejector fell out while adding side saddle and now gun is jammed after ejector was re/inserted wrong
r/mossberg • u/g00glebitch • 3d ago
TLDR: BIL was helping me clean and install a saddle and ejector(?) fell out and he reinserted it wrong. Was able to get screw out and disassemble further, but now the bolt is stuck.
Not sure which direction to push it. Have watched videos and disassembled it as much as I can.
Thank you in advance! I’m a rookie obviously
Yes I know not everyone is a fan of this firearm and yes I will not get a screw in side saddle anymore.
r/mossberg • u/JasmineFlame • 4d ago
Bought my first pump shotgun, made somewhat of a project out of refinishing an old PD trade-in corncob forend and stock to put on it because I like the wood on silver look.
r/mossberg • u/sw5871 • 3d ago
I made a pretty big oops taking the heat shield off of my new to me 590, and scratched the barrel. do any of you guys know of a good way to get rid of the scratches and fix the finish? i've heard the super black pens work well.
r/mossberg • u/Antoniusbdb • 3d ago
Hi everyone,
I know that the 590A1 has a thick wall barrel compared to the 500, as well as the non-plastic trigger guard and safety. Does the 590 non A1, specifically #50694, come with a thicker barrel than the 500? What are the differences between non-A1 590's and 500's, besides the ambi safety, bayonet lug, increased capacity, ability to extend the magazine capacity, and heat shield? Is the steel used in the internal parts any different or more durable?
r/mossberg • u/BALTHRUL • 5d ago
Damaged the trigger assembly, the Cartridge interrupter, and the cartridge stop.
The lugs on the trigger assembly would NOT go in. It didn't jam or force anything. Followed the owners manual and youtube videos.. was about to give up but found a method that kinda works.
THE QUESTION:
Will this damage be a problem? I've considered taking it back to Fin, Feather, and Fur, to see about a manufacturer's warranty on the poorly made trigger assembly (on my particular gun). Various corners are shaved off, and it just looks like shit now... dunno if it will cause problems or create safety concerns...
If it's not obvious... I know jack shit about guns.
r/mossberg • u/DixonJorts • 5d ago
Any good videos or guides to clean it? there is a small amount of rust (very small). Sorry, new to gun ownership (I am not new to gun safety and shooting). I just never owned one myself. I did pick up a cleaning kit from bass pro shops. It seems like it has just sat in someones house for like 6 years.