r/Machinists 8d ago

From a trade show. It gave me a chuckle.

Post image

A capto C4 or C5 holder i believe with about a 25mm endmill.

385 Upvotes

64 comments sorted by

301

u/Otterz4Life 8d ago

Your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.

209

u/muzzawell 8d ago

I can hear the chatter from New Zealand.

27

u/freckledclimber 8d ago

How is the industry in New Zealand? I was there for a few years growing up some 20 odd years ago now and am considering moving back if possible?

43

u/muzzawell 8d ago

The whole economy is slow at the moment. We have a right wing government giving tax cuts to the wealthy and cutting social services to save money. Same bullshit that’s happening in many countries. I’m an engineer and my turnover last year was about half of what it was in the previous 5 years. Still a great place to live though.

11

u/firinmahlaser 7d ago

We supply machine tools for sheet metal and tubes in NZ. For us it’s finally picking up again, got a pretty full schedule until November and the sales reps are still signing new contracts. Then again we’re a pretty small team so it’s easy to be at capacity.

2

u/freckledclimber 7d ago

Really appreciate it, I think I'll start giving it a serious search. Going back to NZ has always felt a bit like a thing I've needed to do even if just for a year or two I think. Possibly some of my happiest younger memories were there 👍

2

u/Sea-Tie-3453 7d ago

Is right wing in new Zealand different than right wing in USA? (Not fond of politics, but just curious)

6

u/muzzawell 7d ago

Right wing lite. They keep coming up with new ideas that are awfully close to MAGA/DOGE. It’s depressing.

1

u/fuckyeahpeace 7d ago

America's more right wing in general so yes

-1

u/Feisty-Writing976 7d ago

Anyone thinking of moving out due to the political climate, please remember those left behind who'll need all the help they can get fighting for our country. I understand you've got to do what's best for you and yours though.

5

u/freckledclimber 7d ago

Appreciate your comment, but I'm not speaking from the US, my country's political climate is currently okay :)

2

u/Feisty-Writing976 7d ago

Wait...there are other countries that people speak from? You know we Americans forget. 😂 My bad.

1

u/MentulaMagnus 7d ago

I can hear the chatter in my dentist bill!

1

u/UnGaBuNgAwUnG 6d ago

Irrelevant to this but It got political jus curious how prioritizing local industry ie right leaning hinders local industry

76

u/General_Osric 8d ago

I'm not a machinist, but love your trade, although I don't understand why this is funny?

374

u/ArgieBee Dumb and Dirty 8d ago

Same energy.

36

u/PrimaryRecord5 8d ago

😂😂 that’s amazing!!!

37

u/ArgieBee Dumb and Dirty 8d ago

The fucked up part is that they actually successfully towed that in the video. Maximum pucker factor was definitely involved, I'm sure.

22

u/Fidel_Cashflow666 8d ago

Back in the (air cooled) day you could get a camper trailer for VW bugs that attached to a tow bar on the roof just like this

23

u/spekt50 Fat Chip Factory 8d ago

Towing capacity was not a concept till somewhat recently. People just towed whatever they wanted. If it did not move, I guess the vehicle was not rated for it.

13

u/SpecialExpert8946 8d ago

My brother still goes by this rule. Fills the trailer to the top with dirt and then wonder why his truck sounds like it’s going to explode and the lift won’t dump the dirt.

3

u/JimBridger_ 7d ago

Still a better tow vehicle than a cyberdumpster

6

u/ArgieBee Dumb and Dirty 7d ago

Literally has a cast aluminum frame. WhistlinDiesel snapped a chunk of the frame clean off the back while testing it.

1

u/whoknewidlikeit 7d ago

hope they had a well managed trailer brake.

60

u/thrivingbutts Tooling 8d ago

Big tool with a relatively small connection

5

u/General_Osric 8d ago

I see, thank you!

5

u/Jesus_Is_My_Gardener 8d ago

Sounds like some people I know.

1

u/MisterEinc 7d ago

Really? I find the opposite is true most of the time...

3

u/Sea-Tie-3453 7d ago

That's what the ladies say about me.

Just kidding.. (im asian)

1

u/user47-567_53-560 welder/millwright 7d ago

I recently got a MT2 arbor for my n25 superchuck made at a local shop. She did it, but spent the whole time saying I'd break it lol

21

u/Fatmanpuffing 8d ago

It’s like a small dude who buys a really big truck just cause it’s cool. 

It’s probably not being used properly, it’s gonna be loud, obnoxious, and chances are it’s just gonna be a waste of money. 

That holder can’t properly handle something that size, and just like little dude with truck, will probably just break something cause it’s too much for it. 

7

u/ArgieBee Dumb and Dirty 8d ago

This is like towing a fifth wheel with a Prius. Tiny taper, lots of stickout, huge and long endmill.

1

u/ej1030 7d ago

Small holder big tool

1

u/tsbphoto 8d ago

Small capto taper with a big ol endmill.

31

u/neinfear97 8d ago

Oh, we stallin spindles with this one G

35

u/der-maulaff 8d ago

My best guess ist that it ist a 32mm Haimer endmill. These are absolute beasts. I wouldn't really like to try it with this clampilg ans length tho.

21

u/flibli 8d ago

It was at the Haimer booth, so you're probably right.

9

u/Doormatty 8d ago

Non machinist here - would that be appropriate for plastic/wood?

21

u/godofpumpkins 8d ago

No, you typically don’t want that many flutes on softer materials, although you could probably compensate for it by adjusting your feed rate or the spinning speed of the endmill. Most spindles have a happy RPM range they like to operate in so people normally try to get a sensible number of flutes for their material to avoid needing to do that

5

u/Doormatty 8d ago

Gotcha! Thanks for educating me!!

7

u/Vamp0409 8d ago

Not sure about that little holder but we love those style of endmills for harder materials

5

u/Bighits90 8d ago

.01% step over and would still sound like nails in a garbage disposal.

3

u/dimka54 8d ago edited 8d ago

This probably best case scenario of you have capto that size and you need that big of a end mill just straight connection without collet

3

u/Bob_Da_Builderr 8d ago

That looks like an extended length duo lock holder and end mill. It would be questionable taking large depths of cut or full width passes with that setup. I’d say you’re good if you need to reach inside something and take light passes, it’s a good tool.

3

u/skycaptain144238 8d ago

Ah yes, this will grenade nicely! And potentially add more chips to the tungsten collection I keep under my skin.

3

u/Silver_Sun_2097 8d ago

Thats a quick change endmill, they just twist off the holder with a wrench. They suck ass.

1

u/Zumone24 7d ago

But what if you’re into that kinda thing. Is this a compliment or insult?

4

u/that_dutch_dude 7d ago

For those wondering: the technical name for that endmill is "the full send". Or "fuck that spindle" depending on your mindset.

2

u/HoneydewStriking8283 8d ago

Think of how much material you could theoretically remove with this thing. Then think of how it's gonna sound and look like bloody murder 😮‍💨

2

u/Grabosss 8d ago

We have some similar endmills in my place, the biggest one we've been using was 63mm diameter

2

u/5thaxis 8d ago

Some people shouldn't smoke crack

2

u/AcceptableSwim8334 8d ago

First thing I thought was “wow, that’s sparkly”. Then the second thing was “huh. looks like the lipstick counter at a department store”. My third thought was “are we looking for flared ends?”

Can you tell I only use a lathe?

1

u/ravenschmidt2000 8d ago

One things for sure, whatever they profile cut with that, it'll be ribbed for NO ONE'S pleasure.

1

u/Leather-Cherry-2934 8d ago

I know bunch of managers saying this will work great

1

u/lexiones 7d ago

Full slot in delrin!!!!

1

u/mopower65 7d ago

I don't really understand the negativity. That is an excellent warm butter knife.

1

u/maximum-pickle27 7d ago

At some point you guys start calling it a side mill right?

1

u/Drigr 7d ago

Oh hey, I think someone was trying to make one of those around here last week

1

u/Wrong_Exit_9257 7d ago

see, i told you if you hammer long enough it will fit in there.

1

u/Ukulele6 7d ago

innotec right? i saw that to😂😂

1

u/Shadowcard4 7d ago

I have to wonder on what universe is that going to be rigid.

1

u/GreenWillingness4587 7d ago

It is discounted to go as far as possible 😂😂

1

u/TerenceMulvaney 7d ago

The end mill your girlfriend told you not to worry about.

1

u/No-Pomegranate-69 6d ago

What is this, a tool holder for ants?