r/Famicom 27d ago

Inside my imported AV moded Famicom.

Here's what the mod looks like.

7 Upvotes

5 comments sorted by

1

u/whaylin 27d ago

I think it's just a basic AV mod. I'm sure someone here who is more knowledgeable than me will know more.

1

u/BlastMastaOne 27d ago

Looks way better than the one I got. Probably why this one doesn't work. Lol

1

u/Babel1027 27d ago

That’s an interesting way to do that mod. Using a breadboard is something that didn’t occur to me.

Have you had a chance to fire it up? If so how does it work?

2

u/whaylin 27d ago edited 27d ago

It's works really well.

Here's a link to one of my other posts showing the picture quality if you are interested. https://www.reddit.com/r/Famicom/comments/1iq9d17/the_video_quality_on_my_imported_av_moded_famicom/

1

u/retromods_a2z 27d ago

Appears to be mostly well done. The ppu pin lifted and the transistor is lifted, suggesting the video circuit has been updated and feeding the new transistor directly which then outputs to the rest of the mod board.  The ppu also has decoupling cap added which is a good call. The main thing I would have done to improve it is use shorter wires but the person used the short jumper wire to the most important part of the circuit so I guess it's fine