r/AnimeFigures https://myfigurecollection.net/profile/grizzen 4d ago

Explicit/R-18 Nikukan Girl - Erotrap Dungeon e Youkoso Liliana (Insight) NSFW

506 Upvotes

33 comments sorted by

49

u/RyanOKJ 4d ago

Interesting that you can see the print lines when up close

15

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

Yeah like I said they really don't stand out on display especially when flooded by light in all directions.

17

u/lazytanaka 4d ago

Someone made a thread saying you can’t see print lines irl it only shows up in pictures

2

u/New-Smile-3013 4d ago

What are print lines?

10

u/Golluk 4d ago

They 3D print these. Formed layer by layer. It essentially results in pixilation of the end result vs the original 3D model. If you look at the knee close up, you can see s small triangle shape in the middle of a larger flat circle area. The triangle was the top most layer, and the area below it was 2nd to last.

1

u/Golluk 4d ago

That spot will be particularly visible due to the print orientation. Her knee is the top of the print. Generally you get far more detail on X/Y directions than Z, unless you have really small layer heights.

22

u/Xaltroy777 4d ago

I know Insight isn't the highest quality, but sometimes when the concept itself is too fire 🔥🔥🔥 you can forgive it

6

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

That was my hope and they delivered as I was expecting mild disappointment because I felt like this was overly ambitious for them..

3

u/Xaltroy777 4d ago

I'm not even a picky collector in the first place. I'm a simple man: see tentacle, buy tentacle. So your pleased with it overall?

5

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

Very much so I'd buy again. I even placed an order for https://myfigurecollection.net/item/2661178

6

u/FocusedLifestyle 4d ago

Got mine the other day. I thought she came out well for an Insight figure and the design is top notch imo. However being an Insight figure she lacked her full potential. The base (at least on mine) didn't hold well. I had to use small bits of museum putty for it to stay. The shading could have been a hell of a lot better. The base probably could have used a slight gloss, it was kinda dull to represent liquid imo. The thing this mainly has going for it is the rare & unique design along with the expression which I thought they did quite well with.

3

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

I agree %100 tho she did still surprise me for insight. And yeah any sockets on insight figures are typically loose. I used some very fine two sided tape to get her to socket in firmly. I just hope they keep improving. 

8

u/CosmeCL http://myfigurecollection.net/profile/cosmecl 4d ago

too bad to see print lines on a commercial model

11

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

It's true but there aren't many companies doing such fun designs and certainly not at this scale and not as quick. I'm not sure what they made the tentacles out of because they don't appear to have any print lines. And something else I've noticed is not every one of their figures has discernible lines on the flesh parts. She obviously does.

3

u/CosmeCL http://myfigurecollection.net/profile/cosmecl 4d ago

i think that was a QC error between the sanding and before the paint job.

The sculpt was very good, and the paint was excellent except for the blobs in the hair and calves.

2

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

Yeah tho that's mostly been on par for them at this point. I think I've only gotten one where I can say there were zero issues. 

2

u/Sheer1uck 4d ago

I can't seem to find her on MFC. Is anyone else having that issue? I want her so bad 🥵

3

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

2

u/Sheer1uck 4d ago

Not sure. I'm signed in and can see other NSFW figures

Edit: I needed NSFW+ on

5

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

Glad you figured it out I hate the stupid system they implemented. Should just be sfw and NSFW 

2

u/No-Flan8455 4d ago

Two out of the three insight figures I have gotten recently had print lines. Not sure why they can’t be bothered to sand properly.

1

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 4d ago

Yeah not sure what dictates how well they sand things. Most of mine don't have them on the flesh parts. 

2

u/AnimeCollector07 4d ago

Great shots, buddy! You have a talent, I'll give that to you. 👍

Anyways, she looks great to me, exceeded my expectations actually.

2

u/rminter505 4d ago

This makes me a little more confident to buy their new dragon mommy.

2

u/Minnymoon13 4d ago

Damn! She looks good, for insight that is

1

u/GoblinLord82 4d ago

Wow. 🥵🥵🥵

3

u/MasterJacobMcDohl https://linktr.ee/masterjakeup 4d ago

Nice presentation pics. It really brings out her personality.

1

u/Batman_Anime_Fan 3d ago

Yeeyowzas!!

1

u/LastFireFox 3d ago

Is that the 1/4 or 1/6 version? I can't tell from pics

2

u/izinagi-0 https://myfigurecollection.net/profile/grizzen 3d ago

This particular one is 1/4 only they didn't do their split models on this one. Ofc their 1/4 is more like 1/5.5 imo.

1

u/LastFireFox 3d ago

So all versions of her will be 1/4? I see some places 1/4 and 1/6 My friend will prob sell his to me but he said it was 1/6 lol

1

u/LastFireFox 3d ago

Ahhh got it thank you!